Flowmaster 817659 Force II Cross Member Back Exhaust System for Chevrolet Corvette

Flowmaster 817659 Force II Cross Member Back Exhaust System for Chevrolet Corvette

Flowmaster's Force II Cross Member Back system for the 1970-1973 Chevrolet Corvette is perfect for the person looking for a moderate exterior and mild interior exhaust tone, with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR (Dual Out the Rear) system for the 5.7L V8 features 50 Series Delta Flow mufflers, a Scavenger X-pipe assembly and 2.25 inch tailpipes. Like all Flowmaster systems, the pipes are all mandrel bent to reduce any restrictions and maximize performance. The system finishes with rectangular polished 304S stainless steel tips that exit in the factory cutout bezels. The exhaust system is manufactured in the USA out of 409S stainless steel and is covered by Flowmaster's Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Note: Can be used with manifold downpipe kits #81098 (Manual transmission) or #81095 (Auto transmission) to create a complete system.

  • Brand: Flowmaster
  • ASIN: B00M3R72FY
  • UPC: 700042031184

Walker 35337 Hardware Clamp

Walker 35337 Hardware Clamp

Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today's emissions control needs, while developing solutions for tomorrow's challenges. Walker is a 'one-stop' convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.

  • Brand: Walker
  • ASIN: B000C8ZACI
  • UPC: 086387353373

Mr. Gasket 5900 Ultra-Seal Exhaust Manifold Gaskets - 2 Per Set

Mr. Gasket 5900 Ultra-Seal Exhaust Manifold Gaskets - 2 Per Set

This ultra-seal exhaust gasket is made of high temperature steel core/graphite faced exhaust material which seals the connection between the manifold and cylinder head. It prevents exhaust leakage out of the connection and also ensures that all exhaust gas will flow through the catalytic converter for treatment. Flange and ring gaskets seal other connection points in the exhaust system. It can be trimmed for modified ports and is packaged 2 per set. V6 and V8 engines require two manifold gaskets.

  • Brand: Mr. Gasket
  • ASIN: B000BW8VYO
  • UPC: 084041059005

Flowmaster 8042541 40 Series Muffler 409S - 2.50 Offset IN / 2.50 Center OUT - Aggressive Sound

Flowmaster 8042541 40 Series Muffler 409S - 2.50 Offset IN / 2.50 Center OUT - Aggressive Sound

The Original 40 Series muffler delivers an aggressive exterior and interior tone. It offers the original Flowmaster sound, is constructed of 16-gauge 409S stainless steel and fully MIG-welded for maximum durability.

  • Brand: Flowmaster
  • ASIN: B002Q2M6U2
  • UPC: 700042022557

Mr. Gasket 5912 Ultra-Seal Exhaust Manifold Gaskets - 2 Per Set

Mr. Gasket 5912 Ultra-Seal Exhaust Manifold Gaskets - 2 Per Set

This ultra-seal exhaust gasket is made of high temperature steel core/graphite faced exhaust material which seals the connection between the manifold and cylinder head. It prevents exhaust leakage out of the connection and also ensures that all exhaust gas will flow through the catalytic converter for treatment. Flange and ring gaskets seal other connection points in the exhaust system. It can be trimmed for modified ports and is packaged 2 per set. V6 and V8 engines require two manifold gaskets.

  • Brand: Mr. Gasket
  • ASIN: B000BW8VZS
  • UPC: 084041059128

Spectre Performance 536 Exhaust Gasket

Spectre Performance 536 Exhaust Gasket

Spectre Header Gaskets for big block Chevy 396-454 engines with 1.9 inch by 2.0 inch square ports are made from compressed ceramic fiber. They will not deteriorate or crack from exessive heat or pressure. This part comes with 2 header gaskets. Spectre header gaskets are designed to stop header leaks by conforming to warped header flanges and manifolds.

  • Brand: Spectre Performance
  • ASIN: B001FN8C1A
  • UPC: 089601053608

Spectre Performance 535 Exhaust Gasket

Spectre Performance 535 Exhaust Gasket

Spectre Header Gaskets for big block Chevy 396-454 engines with 1.70 inch round ports are made from compressed ceramic fiber. They will not deteriorate or crack from exessive heat or pressure. This part comes with 2 header gaskets. Spectre header gaskets are designed to stop header leaks by conforming to warped header flanges and manifolds.

  • Brand: Spectre Performance
  • ASIN: B001FL6DHM
  • UPC: 089601005355

Cometic Gasket C5897-030 MLS Exhaust Gasket for Big Block Chevy - Pack of 2

Cometic Gasket C5897-030 MLS Exhaust Gasket for Big Block Chevy - Pack of 2

STRIPHTML($ITEMDESCRIPTION)

  • Brand: Cometic Gasket
  • ASIN: B003JZUM0G

35335 Exhaust Clamp

35335 Exhaust Clamp

Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today's emissions control needs, while developing solutions for tomorrow's challenges. Walker is a 'one-stop' convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.

  • Brand: Dynomax
  • ASIN: B000C8ZAQY
  • UPC: 086387353359

B&M 71502 Differential Cover

B&M 71502 Differential Cover

B&M Cast Aluminum Differential Covers are designed to strengthen the differential by preventing case distortion and ring gear & bearing cap deflection. Constructed of military grade (MIL-A-8625) black anodized A356.0-T6 aluminum, these rugged covers significantly increase the fluid capacity and dissipate heat much faster than the stock factory unit to prolong the life of your ring and pinion gears. Additional features include an engraved B&M logo, drain and fill port locations, a magnetic drain plug for catching ferrous metal particles, and complete hardware and installation instructions.

  • Brand: B&M
  • ASIN: B00TWYZ6L8
  • UPC: 019695715021
Similar 1973 Corvette Exhaust System Results
1973 Corvette Exhaust System Video Results

1973 Corvette Flowmaster exhaust Super 44 mufflers and custom bent exhaust C3 Corvette

1973 Corvette Exhaust System

Replaced the stock exhaust system with a custom bent system from Iowa Muffler and Brake here in Des Moines. 2 1/2 inch exhaust with factory ram horn manifolds and Flowmaster Super 44 mufflers.

  • Likes: 24
  • View count: 6238
  • Dislikes: 0
  • Comments: 12
Tags: Corvette,Flowmaster,Super 44,1973 corvette,Stingray,Custom exhaust,C3 corvette,Exhaust,C3

1968-1973 Chevrolet Corvette Exhaust Dual Magnaflow 16842 Stainless Steel Manifold-Back

1973 Corvette Exhaust System

1968-1973 Chevrolet Corvette Exhaust Dual Magnaflow 16842 Stainless Steel Manifold-Back http://www.jegs.com/i/Magnaflow/642/16842/10002/-1 Manifold-Back Exhaust System 1968-73 Corvette 350 5.7L 2.25"/2.5" Stainless Steel Tubing 2.5" Polished Stainless Steel Tips Dual Rear Exit Manifold-Back Exhau...

  • Likes: 7
  • View count: 2782
  • Dislikes: 0
  • Comments: 4
Tags: JEGS,1968,1969,1970,1971,1972,1973,chevy,chevrolet,corvette,exhaust,dual,magnaflow,16842,stainles...

Corvette Central Exhaust Installation

1973 Corvette Exhaust System

  • Likes:
  • View count: 8416
  • Dislikes:
  • Comments: 9
Tags: Chevrolet Corvette (Automobile Model),Exhaust System (Consumer Product)

1973 Corvette Side Exhaust

1973 Corvette Exhaust System

1973 Corvette Convertible Hooker Headers to side pipes Holly 750 cfm double pumper carb Mild cam

  • Likes: 0
  • View count: 180
  • Dislikes: 0
  • Comments: 0
Tags: