JIUWU 1.0mm Tungsten Steel Carbide PCB CNC End Mill Engraving Bits Milling Machine Pack of 10

JIUWU 1.0mm Tungsten Steel Carbide PCB CNC End Mill Engraving Bits Milling Machine Pack of 10

Specification: Material: solid carbide(Tungsten steel) Shank diameter: 3.175mm /0.125 inch Cutting edge diameter: 1.0mm Total length: approx. 38.00±0.20mm Features: These Engraving bits have sufficient flexural strength and wear resistance Milling, hole and plate edge, surface clean, tidy, no burr Made from ultra-fine grain carbide material which of good milling properties to ensure efficient work A Wide Range of Materials can be engraved, including: Circuit boards,Metal,Majority of plastics, Wood,SMT,Fibre glass, Carbon,FR-4, CEM-3 board and environmental board Package included:10Pcs Carbide End Mill Engraving Bits 1.0mm

  • Brand: JIUWU
  • ASIN: B00SMDP72S
  • UPC: 701304998740

uxcell 10 Pcs Tungsten Carbide CNC PCB End Mill 3.175 Shank 1.0mm Cutting Dia

uxcell 10 Pcs Tungsten Carbide CNC PCB End Mill 3.175 Shank 1.0mm Cutting Dia

Sharp cutting edge, reduce cutting force, lower breaking rate and improve the quality of hole wall;Symmetrical cutter, help to high effective cutting, avoiding drilling offset. 

  • Brand: uxcell
  • ASIN: B00REGXZZA
  • UPC: 702105918944

Wokesi 1mm 1.5mm 2mm 3mm Cutter Dia,Pack of 4,Std Length,4Flutes,HRC55,TiAlN Coated,Metric,Solid Carbide,Square Nose End Mill,CNC Router Bits Cutting Milling Tools (1mm+1.5mm+2mm+3mm HRC55)

Wokesi 1mm 1.5mm 2mm 3mm Cutter Dia,Pack of 4,Std Length,4Flutes,HRC55,TiAlN Coated,Metric,Solid Carbide,Square Nose End Mill,CNC Router Bits Cutting Milling Tools (1mm+1.5mm+2mm+3mm HRC55)

4Pcs Square Nose End Mill Size: A.1mm Cutter:4 Flutes,Blade Diameter=1mm,Shank Diameter=4mm,Overall length=50mm, B.1.5mm Cutter:4 Flutes,Blade Diameter=1.5mm,,Shank Diameter=4mm,Overall length=50mm, C.2mm Cutter:4 Flutes,Blade Diameter=2mm,,Shank Diameter=4mm,Overall length=50mm, D.3mm Cutter:4 Flutes,Blade Diameter=3mm,Shank Diameter=4mm,Overall length=50mm, Attention: 1.Solid carbide tools offer long tool life and faster cutting speeds than other substrates,but more brittle.make sure work piece and machine are stable,use quality collet chucks,or shrink fit chucks. 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions. 3.Adapt to several kinds of cooling conditions, for example oil mist,water,oil,air cooling.

  • Brand: WKS TOOL
  • ASIN: B01CX2C1D6
  • UPC: 758910615622

SHINA 10 Titanium Coat Carbide 0.6mm-1.5mm End Mill Engraving Bits CNC Rotary Burrs Set (ST0.6-1.5mm-10Ti)

SHINA 10 Titanium Coat Carbide 0.6mm-1.5mm End Mill Engraving Bits CNC Rotary Burrs Set (ST0.6-1.5mm-10Ti)

Specification: Material: blade carbide (tungsten steel) Shank Diameter: 3.175mm Cutting Edge Diameter: 0.6-1.5mm(0.6mm,0.7mm,0.8mm,0.9mm,1.0mm,1.1mm,1.2mm, 1.3mm,1.4mm,1.5mm) Cutting edge length (CEL): 6mm Total Length: 38mm Quantity: 1set (10pcs) Guaranty: Within 90 days product quality is not completely satisfied, 100% refund or return! Features: Carbide rods and tungsten steel rods, with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment and long tool life. Coated with titanium:Improve the speed and feed rate of the tool ,Improve the surface wear resistance. Application: PCB, SMT, the CNC, mold, plastic, copper, stainless steel and other precision metal parts processing. Package include: 10 x Milling cutter

  • Brand: SHINA
  • ASIN: B01LYCBH5G

Enpoint™ TiAlN Coated Stainless Cutting Ultra-fine Submicron Carbide 2-Flute Square Nose End Mill 5/32" 4mm Shank 1mm Cut Width CNC Metalworking Milling Cutter for Aluminum Brass Iron

Enpoint™ TiAlN Coated Stainless Cutting Ultra-fine Submicron Carbide 2-Flute Square Nose End Mill 5/32" 4mm Shank 1mm Cut Width CNC Metalworking Milling Cutter for Aluminum Brass Iron

Specifications: Product Type: solid carbide square nose coating end mill Material: tungsten carbide Shank Diameter: 4.0mm(0.157 inch) Cutter Diameter: 1.0mm(0.039 inch) Flute Length: 5.0mm(0.197 inch) Overall Length: 50mm(1.97 inches) Application: This 2 flutes router end mill is mainly suitable for milling materials from soft Plastics to tough Aerospace Alloys including Aluminum, Stainless Steel, Mold and Alloy Steels, Inconel, Hastelloy and Titanium.

  • Brand: EnPoint
  • ASIN: B013JP4KQW
  • UPC: 706795869326

uxcell 5 Pcs 1.0mm Cutting Dia Straight Shank 2 Flute End Mill Milling Cutter

uxcell 5 Pcs 1.0mm Cutting Dia Straight Shank 2 Flute End Mill Milling Cutter

2 flutes, coarse teeth, straight shank, deep helical groove.Comes with a plastic case, it can hold the mill cutter well,Used widely in the milling machines or machine tools for milling the steps, recesses, vertical plane surfaces, etc.

  • Brand: uxcell
  • ASIN: B00REH5BVK
  • UPC: 702105922101

1.5MM Carbide End Milling Cutter,CNC Router Bits, End mill for PCB Machine Pack Of 10

1.5MM Carbide End Milling Cutter,CNC Router Bits, End mill for PCB Machine Pack Of 10

Specification: Material: solid carbide(Tungsten steel) Shank diameter: 3.175mm /0.125 inch Cutting edge diameter: 1.5mm Cutting edge length: 9mm Total length: approx. 37.00±0.20mm Features: These Engraving bits have sufficient flexural strength and wear resistance Milling, hole and plate edge, surface clean, tidy, no burr Made from ultra-fine grain carbide material which of good milling properties to ensure efficient work A Wide Range of Materials can be engraved, including: Circuit boards,Metal,Majority of plastics, Wood,SMT,Fibre glass, Carbon,FR-4, CEM-3 board and environmental board Package included:10Pcs Carbide End Mill Engraving Bits 1.5mm

  • Brand: JIUWU
  • ASIN: B00SMDPF4I
  • UPC: 701304998764

HOZLY 3.175X1.0X7MM Titanium Coated Down-Cut End Mills Carbide PCB Cutter Precision Machining CNC Pack of 10

HOZLY 3.175X1.0X7MM Titanium Coated Down-Cut End Mills Carbide PCB Cutter Precision Machining CNC Pack of 10

Product Name: Engraving Bit(Carbide Plating titanium Bit) Carbide rods and tungsten steel rods, with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment and long tool life. coated with titanium:Improve the speed and feed rate of the tool ,Improve the surface wear resistance. Range of processing: PCB, SMT, the CNC, mold, plastic Material: blade carbide (tungsten steel) Specification: Shank diameter (SHK): 3.175mm Cutting edge diameter (CED):1.0mm Cutting edge length (CEL): 7mm Total length: 38mm Pack size: 10pcs Brand new and unused

  • Brand: HOZLY
  • ASIN: B073TXGGKX
  • UPC: 727670343137

EnPoint™ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 1/8" 3.175mm Shank 1mm Cutter Dia Metalworking Square Nose CNC Spiral Milling Cutter for Brass Copper Foil IC Substrate

EnPoint™ High Hardness Aluminum Cutting 2 Flutes Carbide End Mill 1/8" 3.175mm Shank 1mm Cutter Dia Metalworking Square Nose CNC Spiral Milling Cutter for Brass Copper Foil IC Substrate

Specifications: Product Type: Solid carbide square nose aluminum cutting end mill Material: tungsten carbide Shank Diameter: 3.175mm(0.125 inch) Cutter Diameter: 1mm(0.039 inch) Flute Length: 6mm(0.236 inch) Overall Length: 38mm(1.496 inches) Application: It is designed mainly for cutting aluminum substrate, full copper foil and other high ductility metal plates. And it can also be used for PBGA/BOC/CSP and intergrated circuit substrate molding.

  • Brand: EnPoint
  • ASIN: B0177ORY46
  • UPC: 706795868589

uxcell 1mm Cut Dia 3.175mm 1/8" Round Shank Single Flute Spiral End Mill 5pcs

uxcell 1mm Cut Dia 3.175mm 1/8" Round Shank Single Flute Spiral End Mill 5pcs

Features: Tungsten Steel end mill, straight shank, single flutes, rough milling cutter, can be used to drill into work piece for slotting.The end mill cutter is widely used for machining of carbon steel, cast iron, non ferrous materials.

  • Brand: uxcell
  • ASIN: B0159JJ1VA
  • UPC: 702105896990
Similar 1mm End Mill Results
1mm End Mill Video Results

Machining with a 1mm end mill

1mm End Mill

  • Likes: 1
  • View count: 913
  • Dislikes: 1
  • Comments: 3
Tags:

Test cnc . EndMill 0.2mm.

1mm End Mill

  • Likes: 1
  • View count: 489
  • Dislikes: 0
  • Comments: 3
Tags:

Cogwheel by END mill 0,5 mm

1mm End Mill

Cogwheel by END mill 0,5 mm. DIY milling machine.

  • Likes: 3
  • View count: 277
  • Dislikes: 0
  • Comments: 0
Tags: cogwheel,milling,machine,DIY

CNC milling plywood with a 1mm end mill

1mm End Mill

Open source laser engraver software can generate gcode for engraving but it assumes the "tool" is very narrow. I wanted to see if this same code could be used with a CNC mill, So I bought a 1mm end mill from Amazon to use in my Tormach PCNC 1100. Being extra careful, I chose a 1/16th depth of cu...

  • Likes: 2
  • View count: 327
  • Dislikes: 0
  • Comments: 0
Tags: Tormach,PCNC 1100,CNC Milling,CNC,Fail