Charlotte Pipe ABS 03200 0200 DWV Foam Core SCH 40 Pipe, 2', ABS, 2", Black

Charlotte Pipe ABS 03200 0200 DWV Foam Core SCH 40 Pipe, 2', ABS, 2", Black

Black pipe and fittings are used in sanitary drain, waste, and vent (DWV), sewer and storm drainage applications

  • Color: Black
  • Brand: Charlotte Pipe
  • ASIN: B002KIC3GE
  • UPC: 611942111152

Oatey 270229 Cherne Gripper with 2-Inch End of Pipe Plug

Oatey 270229 Cherne Gripper with 2-Inch End of Pipe Plug

Use the Cherne 2 in. Gripper mechanical plug at the end of a pipe drain, vest or waste system to test for up to 17 psi of back pressure. This plug offers a natural rubber o-ring and a zinc-plated carriage bolt. Ideal for sewer testing and long-term applications.

  • Brand: Oatey
  • ASIN: B000VYNUAW
  • UPC: 675115270220

LASCO 13-1872 Plastic J-Hook Pipe Hanger for Plastic DWV Pipe, 2-Inch

LASCO 13-1872 Plastic J-Hook Pipe Hanger for Plastic DWV Pipe, 2-Inch

LASCO 13-1872 J-Hook Pipe Hanger For Plastic DWV Pipe, 2-Inch, Plastic. 2-Inch plastic J-Hook pipe hanger. Designed for ABS & PVC drain pipes. Hang from floor joists or along wall. Reduces installation time. Easy to install. Reduces installation time.

  • Brand: LASCO
  • ASIN: B00HYWEWZQ
  • UPC: 052151292391

Charlotte Pipe Abs Foam Core Pipe 3 " X 2 '

Charlotte Pipe Abs Foam Core Pipe 3 " X 2 '

ABS Pipe is highly versatile and is recommended for use as a water pipe and can be used underground. Make repairs or short runs with custom short lengths. Coordinate with ABS pipe. Constructed of thermoplastic (ABS) For use where systems will not exceed 176 degrees Fahrenheit Maximum working pressure of 240 psi Should be used with pressured water supply systems Note: Product may vary.

  • Brand: Premium Plumbing
  • ASIN: B002KIG0FY
  • UPC: 611942111169

NIBCO 5803-2 ABS Pipe Fitting, Adapter, Schedule 40, 2" Spigot x 2" NPT Female

NIBCO 5803-2 ABS Pipe Fitting, Adapter, Schedule 40, 2" Spigot x 2" NPT Female

The NIBCO 5803-2 schedule 40 adapter pipe fitting is made of acrylonitrile butadiene styrene (ABS) for use in drain, waste, and vent systems (DWV) and has a spigot connection and a female National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a male spigot connection on one end for fitting into a female unthreaded pipe and female NPT threads on the other end for connecting to a male threaded pipe. The NPT threads create a tighter seal than straight threads, and the spigot end has the same diameter as the pipe it connects to, minimizing turbulence and creating a tight seal. This schedule 40 (standard wall) fitting is made of acrylonitrile butadiene styrene (ABS) for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. ABS resists most household chemicals and many corrosive and abrasive industrial liquids, performs under a wide temperature range, has high impact resistance, and is lighter in weight than metal for simple installation above or below ground. This fitting is compatible with schedule 40 ABS-DWV and can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to...

  • Color: Black
  • Brand: Nibco
  • ASIN: B002E82EQE
  • UPC: 039923194404

NIBCO 5801 ABS Pipe Fitting, Coupling, Schedule 40, 3" x 2" Hub

NIBCO 5801 ABS Pipe Fitting, Coupling, Schedule 40, 3" x 2" Hub

The NIBCO 5801 schedule 40 coupling pipe fitting is made of acrylonitrile butadiene styrene (ABS) for use in drain, waste, and vent systems (DWV) and has hub connections. This coupling fitting connects two pipes going in the same direction with the same diameter to extend a straight run. It has female hub openings for sliding over the ends of male pipes. The hub end connects to pipes with a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of acrylonitrile butadiene styrene (ABS) for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. ABS resists most household chemicals and many corrosive and abrasive industrial liquids, performs under a wide temperature range, has high impact resistance, and is lighter in weight than metal for simple installation above or below ground. This fitting is compatible with schedule 40 ABS-DWV and can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. This fitting meets American Society for Testing and Materials (ASTM) D2661 and D3311 specifications for quality assurance. Pipe fittings are componen...

  • Color: Black
  • Brand: Nibco
  • ASIN: B002E843V8
  • UPC: 039923201324

NIBCO 5807-2 Series ABS DWV Pipe Fitting, 90 Degree Elbow, 1-1/2" Spigot x Hub

NIBCO 5807-2 Series ABS DWV Pipe Fitting, 90 Degree Elbow, 1-1/2" Spigot x Hub

The NIBCO 5807-2 90-degree elbow pipe fitting is made of acrylonitrile butadiene styrene (ABS) for use in drain, waste, and vent systems (DWV) and has a spigot connection and a hub connection. This 90-degree elbow fitting, or "ell," connects two pipes at a 90-degree angle to change the direction of flow between pipes. It has a male spigot connection on one end for fitting into a female unthreaded pipe and a female hub end on the other for sliding over a male unthreaded pipe. The hub end connects to pipes with a smooth bore for enhanced flow, and the spigot end has the same diameter as the pipe it connects to, minimizing turbulence and creating a tight seal. This fitting is made of acrylonitrile butadiene styrene (ABS) for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. ABS resists most household chemicals and many corrosive and abrasive industrial liquids, performs under a wide temperature range, has high impact resistance, and is lighter in weight than metal for simple installation above or below ground. ABS can be connected to other material such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of ...

  • Color: Black
  • Brand: Nibco
  • ASIN: B002E8A3EY
  • UPC: 039923196705

Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe Thread Sealant

Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe Thread Sealant

Contains Teflon, and synthetic fibers for a stronger seal | for use on natural gas, lp gas, refrigerants, water, fuels, oils, etc. | for use on all types of metal and plastic pipe, including PVC, cpvc (including flow guard gold) and ABS | may be pressurized immediately, even on large pipe | nsf, upc/iapmo and CSA approved

  • Color: White
  • Brand: Rectorseal
  • ASIN: B0002YPAFY
  • UPC: 021449236317

NIBCO 5806-2 ABS Pipe Fitting, 45 Degree Elbow, Schedule 40, 1-1/2" Spigot x 1-1/2" Hub

NIBCO 5806-2 ABS Pipe Fitting, 45 Degree Elbow, Schedule 40, 1-1/2" Spigot x 1-1/2" Hub

The NIBCO 5806-2 schedule 40 45-degree elbow pipe fitting is made of acrylonitrile butadiene styrene (ABS) for use in drain, waste, and vent systems (DWV) and has a spigot connection and a hub connection. This 45-degree elbow fitting, or "ell," connects two pipes at a 45-degree angle to change the direction of flow between pipes. It has a male spigot connection on one end for fitting into a female unthreaded pipe and a female hub end on the other for sliding over a male unthreaded pipe. The hub end connects to pipes with a smooth bore for enhanced flow, and the spigot end has the same diameter as the pipe it connects to, minimizing turbulence and creating a tight seal. This schedule 40 (standard wall) fitting is made of acrylonitrile butadiene styrene (ABS) for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. ABS resists most household chemicals and many corrosive and abrasive industrial liquids, performs under a wide temperature range, has high impact resistance, and is lighter in weight than metal for simple installation above or below ground. This fitting is compatible with schedule 40 ABS-DWV and can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to...

  • Color: Black
  • Brand: Nibco
  • ASIN: B00270WQ4E
  • UPC: 039923196101

Genova Products 81644 ABS-DWV Two Way Clean-Out Tees, 4"

Genova Products 81644 ABS-DWV Two Way Clean-Out Tees, 4"

Geneva Products 81644 4" ABS-DWV Two-way Clean-Out Tees Used with a vertical pipe stack, this fitting provides for above ground level access to piping Hub x Hub x Hub 4". This Product is manufactured in United States.

  • Color: Black
  • Brand: Genova
  • ASIN: B001B00LSY
  • UPC: 038561009835
Similar 2 Abs Pipe Results
2 Abs Pipe Video Results

How To Cut and Install ABS Drain Pipe

2 Abs Pipe

Shannon from http://www.house-improvements.com shows you how to cut and install ABS plastic drain pipe in your house. This is commonly used for drain (sewer) and vent pipes in your home plumbing system.

  • Likes: 547
  • View count: 136591
  • Dislikes: 33
  • Comments: 86
Tags: abs,drain,pipe,sewer,cut,install,how-to,measure,slope,black,pvc,water,sewage,sink,toilet,bathroom...

Air Compressor - Bursting 1 1/2" ABS DWV Cellcore Pipe

2 Abs Pipe

I had heard on the net that this kind of pipe is a poor choice for air cannons, so naturally I just had to try bursting some for myself. A piece of ABS DWV Cellular Core 1 1/2" 40 mm pipe about 22" long was used. End caps were glued on and the glue allowed to dry for 24 hours. One end was drilled...

  • Likes: 19
  • View count: 3801
  • Dislikes: 1
  • Comments: 5
Tags: air,compressor,ABS,plastic,pipe,burst,test,pop,explode,cellular core

How to Cut PVC or ABS Pipe Straight

2 Abs Pipe

Cutting large, plastic (PVC or ABS) sewer pipe straight and square can be challenging, especially without power tools, but it can be done. Here I show you how to do it. Skip to 0:50 to see it done by hand. You can buy 4" hose clamps (as I used in the video) on Amazon: US: http://amzn.to/2q4NyRX...

  • Likes: 214
  • View count: 58859
  • Dislikes: 30
  • Comments: 21
Tags: Gabe's Hacks,diy,pipe,sewer,PVC,ABS,plumbing,do it yourself,pvc,how to,how to cut PVC,how to cut ABS

The difference between PVC and ABS pipe systems

2 Abs Pipe

A description of the difference between PVC and ABS pipe systems. the video makes reference to our technical section which is available at http://tinyurl.com/pqmptu8

  • Likes: 54
  • View count: 25373
  • Dislikes: 2
  • Comments: 3
Tags: pvc,abs,pipe,plastic,difference,yt:stretch=16:9