DIYmall Carbon Fiber Mini 250 FPV Quadcopter Frame Mini Quad Frame for 250 C250

DIYmall Carbon Fiber Mini 250 FPV Quadcopter Frame Mini Quad Frame for 250 C250

Recommended Configuration(Not included) Motor: 2208/1800kv Propeller : GemFan 5x3 Battery: 3S 11.1v1500mah Flight Controller: FPVManuals CC3D, RMRC CC3D, Naze32, Flip Pro MWC Receiver: FrSky T6- receiver CCD Camera: SONY Super HAD CCD 600TVL Board Camera w/ 2.8mm lens - Settings to use on camera HD Camera: Mobius Action Camera Video Transmitter: Immersion RC 600mw Vide Specifications: Material:carbon fiber Weight:141 g Package weight:161 g Package including: 1 x Carbon Fiber Mini 250 Quadcopter Frame Mini Quad Frame for 250C250 8 X Nylon cable Tie NOTE: it does come with extra bolts and nuts for replacements in case any were to get stripped in future.

  • Brand: DIYmall
  • ASIN: B016BI4VWC

ARRIS X-Speed 250B V2 250 FPV Quadcopter Racing Drone RTF W/ Flycolor Raptor 390 Tower 4-in-1 (30A ESC + F3 + OSD + PDB)

ARRIS X-Speed 250B V2 250 FPV Quadcopter Racing Drone RTF W/ Flycolor Raptor 390 Tower 4-in-1 (30A ESC + F3 + OSD + PDB)

Specifications: Dimension: 7.88 x 9.35 x 2.63 (inches) Diagonal Wheelbase: 268mm (10.55 inches) Flight Controller: Flycolor 4-in-1 Frame Material: Carbon/glass fiber composited sheet BNF weight: 400g Features: 1. Simple structure frame installed with tower structure ESC/PDB, easy to assemble and easy to repair. 2. Big inner space, 268mm wheeabase, 6inches propeller and other equipements is compatible 3. The tower comes with integrated OSD, no need to install it separately 4. The angle of the FPV camera is adjustable from 0 to 45 degree 5. 4mm thick arms, super strong and durable 6. Newly released high efficiency S2205 2300KV motor provides you better performance and longer working life 7. High safety 4S 1500mah 50C lipo battery Package Includes: 1 x ARRIS X-Speed 250B V3 Frame Kit (ASIN: B06XTKS3DK) 4 x ARRIS S2205 2300KV Brushless Motors (2 CW + 2 CCW) (ASIN: B01J9ZGK7I) 4 x ARRIS 5042 3-blade Propeller (2 CW + 2CCW) (ASIN: B01N2QGH7J) 1 x Raptor 390 Tower with 30A 4in1 ESC/FC/PDB/OSD (ASIN: B01MFDGIHK) 1 x 700TVL 2.8mm Camera (ASIN: B00U2CBOKQ) 1 x 5.8G 200mw 32CH FPV TX (ASIN: B01EH2YAH0)+ Antenna 1 x Radiolink AT9 Radio Set (ASIN: B0152VO92G) 1 x LED (ASIN: B00XKZZVYM) 1 x ARRIS 4S 1500mah Lipo Battery (ASIN: B01I37E3BS) Other Accessory Required (Not Include): Battery C...

  • Brand: ARRIS
  • ASIN: B015ST5UPM
  • UPC: 787799963241

Readytosky 250 FPV Racing Drone Frame Carbon Fiber 250mm Quadcopter Frame Kit with 4mm Arms and Lipo Battery Strap

Readytosky 250 FPV Racing Drone Frame Carbon Fiber 250mm Quadcopter Frame Kit with 4mm Arms and Lipo Battery Strap

Specifications: Main Material: carbon fiber Arm Plate Thickness: 4mm Diagonal Length: 250mm Plenty of space is reserved on multiple layers so that you can easily fit your FPV and neatly tuck away all the wires. Equipped with rubber damper to decrease vibration during flight. Features: This quadcopter frame is an exremely durable yet lightweight one that is perfect for FPV. Plenty of space is reserved on multiple layers so that you can easily fit your FPV and neatly tuck away all the wires. It will not affect the flying quadcopter. Equipped with rubber damper to decrease vibration during flight. Easy to assemble and convenient to use. ★made of carbon fiber with 4mm arms and shock absorber cottons. ★plenty of space is reserved on multiple layers so that you can easily fit your fpv and neatly tuck away all the wires. ★equipped with rubber damper to decrease vibration during flight. ★aluminum alloy spacer, light weight, reliable. ★suitable for both beginners and senior players. Package including:1set x carbon fiber Mini 250 Quadcopter Frame Kit with 4mm Arms 1x Drone Lipo Battery Strap 2 Pairs x 5045 propeller

  • Color: Black
  • Brand: Readytosky
  • ASIN: B01HLS76DW
  • UPC: 757450334741

REALACC Mini Power Distribution Board With BEC 5V And 12V For 250 Quadcopter FPV Multicopter

REALACC Mini Power Distribution Board With BEC 5V And 12V For 250 Quadcopter FPV Multicopter

Description: Dimensions: 36 x 36mm Weight: About 6g Mounting holes 30.5mm square spacing nput voltage range (2S-6S operation): 7.2 - 26VDC Regulated 5V and 12V outputs LED power indicators ( 5V & 12V outputs ) 4 ESC outputs ESC outputs: Continuous current: 20A per output Peak current (10 seconds/minute): 30A per output BEC 5V output: Designed for RC Receivers, Flight controllers, OSD, and Servos. Voltage: 5.0 +/- 0.1VDC Continuous current: 3 Amps Short-circuit tolerant (10 seconds/minute) LED (indicates voltage is in regulation, within 10%) BEC 12V output: The battery should be 4S~6S LiPo Standard output designed to power cameras and video transmitters,etc. Voltage: 12.0 +/- 0.2VDC Continuous current: 2 Amps (Max.3A 10s/minute) Short-circuit tolerant (10 seconds/minute) LED (indicates voltage is in regulation, within 10%) CAM & VTX voltage bridge:3S operation. choose "VCC" for 12V camera & 12V VTX, VCC=Battery Voltage. 4~6S operation, choose "12" for 12V camera & 12V VTX 3~6S operation, choose "5" for 5V camera Video pass through from the "CAM" pad to the "VTX" pad Package Included: 1 x Matek Mini Power Distribution Board

  • Brand: REALACC
  • ASIN: B018I3S3MC

20pcs M330 Aluminum Column FPV RC Drone Frame Kit Spacer for FPV Racing Drone Quadcopter

20pcs M330 Aluminum Column FPV RC Drone Frame Kit Spacer for FPV Racing Drone Quadcopter

Specification:Item name:Aluminum ColumnQuantity: 20pcsColor: Red BluePackage Including10 * Red Aluminum Column10 * Blue Aluminum Column

  • Brand: Crazepony
  • ASIN: B078Z8Y3V7
  • UPC: 190033839323

Usmile UX5 210mm 4mm thickness X style Carbon Fiber Quadcopter Frame Kit Mini quad fpv quad quadcopter like QAV-X 210 QAV-R 250 suit for 2204 brushless motor 5" props HS117 RunCam Swift

Usmile UX5 210mm 4mm thickness X style Carbon Fiber Quadcopter Frame Kit Mini quad fpv quad quadcopter like QAV-X 210 QAV-R 250 suit for 2204 brushless motor 5" props HS117 RunCam Swift

Made of 4mm carbon fiber bottom plate + 2.0mm top plate , unibody design makes it super lightweight and resistant to crash Suitable for both beginners and experienced players X design reduce resistance when racing, allow you more control, similar with alien and Martian quadcopter frame Weight:85g, designed for high performance FPV Drone Racing Other parts you might be interested: 5.8G fpv receiver for Android phone http://www.amazon.com/dp/B06ZZG6GSR Self-binding Micro DSM2 DSMX receiver http://www.amazon.com/dp/B01NAEN5RG http://www.amazon.com/dp/B01JWFCRYA AIO FPV Camera http://www.amazon.com/dp/B01N9E33XA http://www.amazon.com/dp/B06Y6G19FQ https://www.amazon.com/dp/B01CCQ9OCE https://www.amazon.com/dp/B01LY0C0NZ 210 4mm X frame https://www.amazon.com/dp/B06XXH6JXG

  • Color: 210
  • Brand: usmile
  • ASIN: B071WVNFMM
  • UPC: 735980951423

ARRIS 4S 14.8V 1500mAh 50C Graphene LiPo Pack for FPV 250 RC Quadcopter, Such as Eachine 250, Kingkong 250, etc.

ARRIS 4S 14.8V 1500mAh 50C Graphene LiPo Pack for FPV 250 RC Quadcopter, Such as Eachine 250, Kingkong 250, etc.

This 4S 14.8V 1500mAh 50C lipo battery is specially designed for FPV racer. Besides, it features high efficient and high discharge with great price. The price of this battery is much higher than the similar batteries in the market, because we only sell top-quality batteries. As we all know, the low quality battery might have potential safety hazard, we will never tolerate such products. Besides, if a battery does not have high quality, it might cause damage during flight, which is very dangerous. Our technician also flied quadcopters and racing drones, this ROC 3S battery is their only chooice after testing more than 20 kinds of other batteries in the market. Specifications: Item Name: 1500mah 50C 4S Lipo Nominal Capacity: 1500mAh Dimension: 29mm x 34mm x 80mm  Nominal Voltage: 14.8V Weight: 162g Plug Type: XT60 Package Included: 1 x ARRIS 4S 14.8V 1500mAh 50C LiPo Battery

  • ASIN: B01I37E3BS

SunFounder 250 FPV Quadcopter Drone Frame Kit CC3D Controller EMAX ESC Simon 12A Motor MT2204 2300KV 11.1V Li-po Battery Glass Fiber Racing Flying 4-Axis Copter for Lumenier QAV250 ZMR250 (Assembled)

SunFounder 250 FPV Quadcopter Drone Frame Kit CC3D Controller EMAX ESC Simon 12A Motor MT2204 2300KV 11.1V Li-po Battery Glass Fiber Racing Flying 4-Axis Copter for Lumenier QAV250 ZMR250 (Assembled)

Introduction The SunFounder 250 Quadcopter is tailored for the hobbyists for FPV flying.The racing drone is designed for pursuing the fast speed, which is totally different from those UVA drones who can provide extremely stable flying.you can fly it immediately when you get it. If you purchase it, you will be issued together with attractive packaging. It features stability, flexibility and activity. Mini Design, EMAX motors with 5045 plastic propeller give QAV 250 racing quadcopter more powers.Pushing the throttle, you will feel the fast reaction of the drone. You can realize a stable flight in a high or low altitude or in a forest with the SunFounder 250. For more information ,please refer to http://wiki.sunfounder.cc/index.php?title=SunFounder_250%2BRadiolink_T8FB_Remote_Controller(Assembled) The Image Transceiver Kit is available on http://www.amazon.com/dp/B01MCT9K5E For the FPV TFT LCD, you are recommended to this link: https://www.amazon.com/dp/B01LXZAP8M Component List 1 x SunFounder 250 Quadcopter packaging bag 1 x Full glass fiber frame kit for SunFounder 250 4 x EMAX Motor(2cw+2ccw) 4 x Simon 12A ESC 4 x 5045 Propeller(2cw+2ccw) 1 x Balance Charger 1 x Power Adapter 1 x CC3D Flight Controller 1 x Fonda 3S Battery (Transmitter) 1 x 3S 11.1V 1300m AH T- Plug Li-Po...

  • Brand: SunFounder
  • ASIN: B01N8W9MBW
  • UPC: 701715368507

215mm 215 FPV Racing Drone Frame 5 Inch Carbon Fiber Quadcopter Frame Kit for HIPPO+Power Distribution Board PDB with 5V/12V BEC+LiPo Battery Strap

215mm 215 FPV Racing Drone Frame 5 Inch Carbon Fiber Quadcopter Frame Kit for HIPPO+Power Distribution Board PDB with 5V/12V BEC+LiPo Battery Strap

Description: Wheelbase: 215mm 5 Inch Arm : 4mm weight:101.1g Recommanded Part(not included): Flight Controller: F3 /Naze32/ CC3D Motor: 2204/2205/2206 ESC: 20A-30A Battery: 3S 1300mAh ~ 4S 1300mAh PDB Power Distribution Board Description: Item Name: PCB with Filter BEC BEC Outpur: 5V 12V Input Voltage: 2-6S MAX.: 3A Weight : 6g Features: Latest UBEC, LC Filter Integrated filter circuit boards, more stable,make FPV further and clearer Compatible with CC3D/Naze32/F3 flight controller Package list: 1 x 215mm frame like the picture(unassembled)2-6S Power distribution boardfpv drone battery strap 250mm

  • Color: Black
  • Brand: FPVDrone
  • ASIN: B0746GNRZ5
  • UPC: 757450336554

SunFounder 250mm Full Carbon Fiber FPV Mini Race Quadcopter Drone Frame Kit for F3 CC3D NAZE32 ESC Simon 12A Motor MT2204 5045 propellers Openpilot CleanFlight BetaFlight QAV250

SunFounder 250mm Full Carbon Fiber FPV Mini Race Quadcopter Drone Frame Kit for F3 CC3D NAZE32 ESC Simon 12A Motor MT2204 5045 propellers Openpilot CleanFlight BetaFlight QAV250

Introduction The SunFounder 250 Quadcopter Frame features mini size, great intensity and compact design. The whole frame is made of carbon fiber, and equipped with rubber dampers. Therefore, the SunFounder 250 quadcopter frame boasts ultralight weight and anti-collision ability. In addition, the machine arm its 3mm thickness carbon fiber-made arms endows the drone with anti-shock and anti-collision ability. Thus, it can provide a smooth and stable flight experience for hobbyists. Since it comes with not so many components, it is quite easy to assemble, this frame is perfect for most new and senior pilots. Specifications: Name: SF250 Weight: 138.7g (include Aluminum parts) Diagonal Distance: 250mm Size: 237*183 mm Arms board thickness: 3mm Other board thickness: 1.6mm Recommended Accessories: Flight Controller: F3 /Naze32/ CC3D Camera: Runcam camera /GoPro camera/700TVL HD Camera Motors: 1806/2204/2205/2305 ESC: 12A-20A Propeller: 5 inch Battery: 3S 1300mAh ~ 4S 1300mAh Package Included 1 x SunFounder 250 Frame Kit

  • Brand: SunFounder
  • ASIN: B01MRXC1GJ
  • UPC: 701715369177
Similar 250 Fpv Quad Results
250 Fpv Quad Video Results

Three 250 quadcopters FPV racing - high speed!

250 Fpv Quad

Really nice FPV racing session :) quad 250 setup: Cleanflight 1.9 ZMR250 Flip32 BL20A Cobra 2204 2300 5x45 bullnose Gens ace TATTU 1800mAh 14.8V 75C 4S

  • Likes: 220
  • View count: 50608
  • Dislikes: 10
  • Comments: 22
Tags: yt:quality=high,FPV,FPV Racing,race,Quadcopter,First-person View,racing,Multirotor,Drone,Copter,M...

FPV RACING - 250 FPV Quadcopter racing in a carpark. BRING OUT THE DRONES!!

250 Fpv Quad

Racing in the indoor carpark with our 250 sized quadcopters. If you want your own 250 racing quad check this out: http://www.quadcopters.co.uk/emax-nighthawk-250-and-300-kits-265-c.asp

  • Likes: 1923
  • View count: 941270
  • Dislikes: 181
  • Comments: 210
Tags: Quadcopter,First-person View,Unmanned Aerial Vehicle (Aircraft Type),Park,Racing,Race,250,micro,d...

Eachine Racer 250 Drone Flight Test Review

250 Fpv Quad

This quadcopter may be the perfect entry level quadcopter for FPV racing. Buy it here http://www.banggood.com/Eachine-Racer-250-FPV-Drone-w-Eachine-I6-2_4G-6CH-Transmitter-7-Inch-32CH-Monitor-HD-Camera-RTF-p-1008942.html?p=RB0922217402201307U3 BUT NOT FOR BEGINNERS! Beginners, this is NOT the q...

  • Likes: 919
  • View count: 340016
  • Dislikes: 155
  • Comments: 434
Tags: fpv,racer,Eachine,Racer,250,quadcopter,drone,racing,i6,flysky i6,review,test flight,flight test,f...

Walkera Runner 250 FPV Racing Drone Review

250 Fpv Quad

Definitely not for beginners, this is one fast quadcopter with FPV and telemetry. A GPS model is coming soon. If you need a little excitement, consider this drone before snapping into a Slim Jim. Ooooh Yeahhh! ;-) Find it here on Amazon http://amzn.to/2bUs9ap, or international buyers find it her...

  • Likes: 906
  • View count: 395156
  • Dislikes: 123
  • Comments: 306
Tags: quadcopter,drone,Walkera,250,runner,Walkera Runner 250,Walkera 250 Runner,racer,fast,FPV,FPV Raci...