Set of Four (4) Wheel Spacers - 4x137 - 1.5 inch thick - 12x1.25mm Studs - Fit Kawasaki Teryx , Teryx4 [5217A20]

Set of Four (4) Wheel Spacers - 4x137 - 1.5 inch thick - 12x1.25mm Studs - Fit Kawasaki Teryx , Teryx4 [5217A20]

Set of Four (4) Wheel Spacers - 4 x 137mm - 1.5" Thick - 12x1.25mm studs - 50 Caliber Racing CNC milled using high quality aerospace aluminum for durability and fit. Lug-centric design. Includes one set of open ended tapered lug nuts. These spacers are a great solution for clearance problems when using aftermarket wheels. They will also give your ATV/UTV a more aggressive stance and allows for more stability when using a lift kit. Fits the following Kawasaki models: - Kawasaki Teryx (2011-Up) - Teryx 4 (2011-up) - all other 4x137 patterns using 12x1.25 pitch studs **NOTE -- These spacers are designed to work with aftermarket wheels with 4x137 pattern. If you plan to use OEM wheels as well as some after-market rims your existing lug holes will need to be enlarged. If you purchase this product you are agreeing that you are willing to drill your rims if needed to use these spacers.

  • Brand: 50 Caliber Racing
  • ASIN: B07B9JDWTM

One Pair (2) of Wheel Spacers - 4x156 – 1 Inch Thick – 12x1.5mm Studs - Polaris XP1000, S 900, S 1000 and Ranger 2013-up [5285]

One Pair (2) of Wheel Spacers - 4x156 – 1 Inch Thick – 12x1.5mm Studs - Polaris XP1000, S 900, S 1000 and Ranger 2013-up [5285]

One Pair (2) of Wheel Spacers - 4 x 156mm - 1" Thick - 12mm studs - 50 Caliber Racing CNC milled using high quality aerospace aluminum for durability and fit. Lug-centric design. Includes one set of open ended tapered lug nuts. These spacers are a great solution for clearance problems when using aftermarket wheels. They will also give your ATV/UTV a more aggressive stance and allows for more stability when using a lift kit. For Polaris Ranger and RZR XP1000, S 900, S 1000 with 12mm studs (2013-up) Note: Polaris switched to 12mm studs on many 2013-up models, including Ranger, RZR XP1000 and others. These spacers will only work on 12mm studs, so make sure you measure before purchasing! 3/8" stud spacers can be found by searching Amazon for part # [5215] - Be advised that you may need to modify your existing studs if they protrude past surface of spacers.

  • Brand: 50 Caliber Racing
  • ASIN: B00T6RZRHO

Set of Four (4) Wheel Spacers - 4x156 – 1.5 Inch Thick – 3/8” Studs - Polaris RZR, RZR4, and Rangers Up to 2012 and some 2013 [5215-A]

Set of Four (4) Wheel Spacers - 4x156 – 1.5 Inch Thick – 3/8” Studs - Polaris RZR, RZR4, and Rangers Up to 2012 and some 2013 [5215-A]

Set of Four (4) Wheel Spacers - 4 x 156mm - 1.5" Thick - 3/8" studs - 50 Caliber Racing CNC milled using high quality aerospace aluminum for durability and fit. Lug-centric design. Includes one set of open ended tapered lug nuts. These spacers are a great solution for clearance problems when using aftermarket wheels. They will also give your ATV/UTV a more aggressive stance and allows for more stability when using a lift kit. For Polaris RZR 570, 800, and 900 and ATV models with 3/8" studs Note: Polaris switched to 12mm studs on many 2013-up models, including Ranger, RZR XP1000 and others. These spacers will only work on 3/8" studs, so make sure you measure before purchasing! 12mm stud spacers can be found by searching Amazon for part # [5286]

  • Brand: 50 Caliber Racing
  • ASIN: B00T6RZZQ2

Set of Four (4) Wheel Spacers - 4x156 – 1 Inch Thick – 12x1.5mm Studs - Polaris XP1000, S 900, S 1000 and Ranger 2013-up [5285]

Set of Four (4) Wheel Spacers - 4x156 – 1 Inch Thick – 12x1.5mm Studs - Polaris XP1000, S 900, S 1000 and Ranger 2013-up [5285]

Set of Four (4) Wheel Spacers - 4 x 156mm - 1" Thick - 12mm studs - 50 Caliber Racing CNC milled using high quality aerospace aluminum for durability and fit. Lug-centric design. Includes one set of open ended tapered lug nuts. These spacers are a great solution for clearance problems when using aftermarket wheels. They will also give your ATV/UTV a more aggressive stance and allows for more stability when using a lift kit. For Polaris Ranger and RZR XP1000, S 900, S 1000 with 12mm studs (2013-up) Note: Polaris switched to 12mm studs on many 2013-up models, including Ranger, RZR XP1000 and others. These spacers will only work on 12mm studs, so make sure you measure before purchasing! 3/8" stud spacers can be found by searching Amazon for part # [5215] - Be advised that you may need to modify your existing studs if they protrude past surface of spacers.

  • Brand: 50 Caliber Racing
  • ASIN: B00T6RZTOK

One Pair (2) Wheel Spacers 5 x 5 (5 x 127mm) - 1.0 inch thick - Wrangler, Rubicon, Commander, Cherokee, Chevy and GMC 1/2 Ton 2wd Trucks, Astro and G20 Vans [5284-A15]

One Pair (2) Wheel Spacers 5 x 5 (5 x 127mm) - 1.0 inch thick - Wrangler, Rubicon, Commander, Cherokee, Chevy and GMC 1/2 Ton 2wd Trucks, Astro and G20 Vans [5284-A15]

One Pair (2) Wheel Spacers CNC milled using high quality aerospace aluminum for durability and fit. Lug-centric design. Includes tapered lug nuts to mount to your wheel. Available in several bolt patterns to fit virtually every car or truck ever made. Fits the following vehicles: 1964-87 Buick Electra, Le Sabre, Riviera, all full size 1990-96 Buick Roadmaster, Estate Wagon 1986-96 Cadillac Fleetwood 1990-97 Chevrolet Caprice Classic, Impala SS 1955-95 Chevrolet Wagons and HD Models 1967-87 Chevrolet/GMC all 1/2 ton 2WD Pickups, Full size Blazer and Jimmy, Suburban, Yukon, Tahoe 1985-02 Chevrolet/GMC Astro, Safari 1971-96 Chevrolet/GMC G Series 1/2 ton Van 2004-Up Chrysler Pacifica 2008-Up Chrysler Town & Country Van, Voyager 2008-Up Dodge Caravan 1973-78 Ford Custom, Galaxie, T-Bird 2006-Up Jeep Commander 1999-Up Jeep Grand Cherokee 2007-Up Jeep Wrangler, Sahara, Rubicon 1973-79 Lincoln Continental, Mark III 1973-78 Mercury Cougar XR7, Marauder, Marquis, Meteor 1964-92 Oldsmobile 88, 98, All full size 1971-90 Pontiac all full size RWD w/403 Engine NOTE: These spacers are lug centric and are not compatible with hub-centric wheels. Some vehicles above use different size lugs/thread pitch so make sure you measure your vehicle before purchasing. Installation requires one set of open ...

  • Brand: 50 Caliber Racing
  • ASIN: B00TOZOHA6

Set of 4 Wheel Spacers 5 x 5 (5 x 127mm) - 2.0 inch thick - Wrangler, Rubicon, Commander, Cherokee, Chevy and GMC 1/2 Ton 2wd Trucks, Astro and G20 Vans [5284-A3]

Set of 4 Wheel Spacers 5 x 5 (5 x 127mm) - 2.0 inch thick - Wrangler, Rubicon, Commander, Cherokee, Chevy and GMC 1/2 Ton 2wd Trucks, Astro and G20 Vans [5284-A3]

Set of 4 Wheel SpacersCNC milled using high quality aerospace aluminum for durability and fit. Lug-centric design. Includes tapered lug nuts to mount to your wheel. Available in several bolt patterns to fit virtually every car or truck ever made. Fits the following vehicles: 1964-87 Buick Electra, Le Sabre, Riviera, all full size 1990-96 Buick Roadmaster, Estate Wagon 1986-96 Cadillac Fleetwood 1990-97 Chevrolet Caprice Classic, Impala SS 1955-95 Chevrolet Wagons and HD Models 1967-87 Chevrolet/GMC all 1/2 ton 2WD Pickups, Full size Blazer and Jimmy, Suburban, Yukon, Tahoe 1985-02 Chevrolet/GMC Astro, Safari 1971-96 Chevrolet/GMC G Series 1/2 ton Van 2004-Up Chrysler Pacifica 2008-Up Chrysler Town & Country Van, Voyager 2008-Up Dodge Caravan 1973-78 Ford Custom, Galaxie, T-Bird 2006-Up Jeep Commander 1999-Up Jeep Grand Cherokee 2007-Up Jeep Wrangler, Sahara, Rubicon 1973-79 Lincoln Continental, Mark III 1973-78 Mercury Cougar XR7, Marauder, Marquis, Meteor 1964-92 Oldsmobile 88, 98, All full size 1971-90 Pontiac all full size RWD w/403 Engine NOTE: These spacers are lug centric and are not compatible with hub-centric wheels. Some vehicles above use different size lugs/thread pitch so make sure you measure your vehicle before purchasing. Installation requires one set of open end t...

  • Brand: 50 Caliber Racing
  • ASIN: B00TOZOQYS

One Pair (2) of Wheel Spacers – 5x4.5” (5x114.3mm) Bolt Pattern, 2 Inch Thick, ½” studs – Mustang, Civic, Accord, Impreza, Wrangler [5284-A2]

One Pair (2) of Wheel Spacers – 5x4.5” (5x114.3mm) Bolt Pattern, 2 Inch Thick, ½” studs – Mustang, Civic, Accord, Impreza, Wrangler [5284-A2]

One Pair (2) of Wheel Spacers - 5 x 4.5" - 2" Thick - 50 Caliber Racing 91-06 Acura 5 lug 68-Up AMC Eagle, AMX, Pacer 57-04 Chrysler 5 lug 57-Up Dodge Avenger, Caliber, Caravan, Stratus, Stealth 71-85 Dodge 1/2 Ton 57-Up Ford Crown Victoria, Mustang, Galaxie, Fairlane, Falcon, Maverick, Thunderbird 08-Up Ford Taurus, 500, Freestyle, Fusion, Escape, Edge 91-Up Ford Ranger, Explorer 80-85 Ford F100, 88-Up Honda 5 lug 00-Up Hyundai 5 lug 90-Up Infiniti Q45, M45, I30, G35 84-01 Jeep Cherokee, 02-Up Liberty, 87-06 Wrangler 02-Up Kia Sportage, Sedona, Optima, Amanti 02-05 Land Rover Freelander 91-Up Lexus 5 lug 68-Up Lincoln Town Car, MKZ, MKX, LSC, Continental, Aviator 03-08 Mazda 6, CX-7, CX-9, MX-3, RX8, Tribute 06-Up Mercury Milan, Mountaineer, 08-Up Sable 97-Up Mitsubishi Galant, Eclipse, Outlander, 04-Up Lancer 90-Up Nissan 300ZX, Maxima, 2002-Up Altima, Murano, 07-Up Sentra, Rogue 57-Up Plymouth Belvedere, Fury, Satellite 08-Up Scion XB 05-07 Subaru Impreza, 2006-Up Tribeca 06-Up Suzuki Grand Vitara 95-Up Toyota All 5 lug fwd cars, 80-08 2wd Trucks (except Prerunner)NOTE:These spacers are lug centric and are not compatible with hub-centric wheels. Some vehicles above use different size lugs/thread pitch so make sure you measure your vehicle before purchasing. Installation re...

  • Brand: 50 Caliber Racing
  • ASIN: B00PJ0Q61I

14x1.5 VMS Racing 20PC 112mm Cold Forged Steel LUG NUTS with BLACK Extended SPIKES in CNC Aluminum for Ford Mustang I4 V6 V8 GT GT350 Coyote Voodoo EcoBoost 2015-2017 with 5 lug wheel pattern

14x1.5 VMS Racing 20PC 112mm Cold Forged Steel LUG NUTS with BLACK Extended SPIKES in CNC Aluminum for Ford Mustang I4 V6 V8 GT GT350 Coyote Voodoo EcoBoost 2015-2017 with 5 lug wheel pattern

VMS Racing PATENT PENDING Lug Nuts are manufactured using the best materials possible. The LUG NUT itself is made with HEAVY DUTY COLD-FORGED STEEL for unsurpassed durability and strength. The CAP EXTENSION is made of HIGH QUALITY CNC MACHINED ALUMINUM and then HARD ANODIZED for impeccable show-quality shine. These are not generic lug nuts and proudly show the VMS Racing Logo on each lug nut which is proudly LASER ENGRAVED. VMS Racing Lug Lugs are Designed in the USA and made specifically in TAIWAN manufacturing facilities. They CANNOT be compared to any Chinese manufactured lug nut that you see anywhere on the Internet. Taiwan is chosen to manufacture VMS Racing Lug Nuts for their CONSISTENCY in QUALITY. The difference in VMS Racing Lug Nut quality is NIGHT and DAY compared to ALL others manufactured in China. Another substantial difference is that these lug nuts are NOT merely caps that snap onto the end of a Chinese Lug Nut that can fall off while operating your vehicle. VMS Racing Lug nut EXTENSIONS have a PATENT PENDING design that screws onto the lug nut with the use of an O-ring to provide perfect fit and tension so that they do NOT fall off due to road vibration or normal operation. You have nice rims. Why trust them to an inferior product. Proudly treat yourself to VMS R...

  • Brand: VMS Racing
  • ASIN: B06XBDYMVW
  • UPC: 797132204160

Set of Four (4) Wheel Spacers - 6x5.5 (6x139.7mm) - 2.0 inch thick - Fit Chevy and GMC, Blazer, Jimmy, Landcruiser, Tacoma, Xterra, [5284-A4]

Set of Four (4) Wheel Spacers - 6x5.5 (6x139.7mm) - 2.0 inch thick - Fit Chevy and GMC, Blazer, Jimmy, Landcruiser, Tacoma, Xterra, [5284-A4]

Set of Four (4) Wheel Spacers - 6 x 5.5" - 2" Thick - 50 Caliber Racing Acura: SLX (96-99) Chevrolet: 1/2 ton Blazer, Suburban, Full Size 4x4 (71-87), Colorado (2004-2014) Dodge: D-50, Ram 50 (79-03), Raider 4wd (86-89) Ford: Courier (77-84) GMC: 1/2 ton Jimmy, Suburban, Full Size 4x4 (71-87), Canyon (04-Up) Honda: Passport (94-03) Hummer: H3 (06-Up) Hyundai: Entourage (07-09) Infiniti: QX4 (96-03), QX56 (04-08) Isuzu: Amigo (89-00), Axiom (02-04) Pickup (80-96), Rodeo (91-04), Trooper (92-96), Vehicross (99-Up) Jeep: All 6 lug Cherokee, Grand Wagoneer (74-92) Kia: Sedona (06-Up) Lexus: GX470 (03-Up), LX450 (96-97) Mazda: 2600 (77-93), B2000, 2200, 2300, 2600 Pickup (77-93) Mitsubishi: Montero (83-06), Pickup (83-96) Nissan: Pickup, Frontier 2WD and 4WD (73-04), Armada (04-08), Pathfinder 2WD and 4WD (87-04), Titan (04-Up), Xterra (00-04) Plymouth: Arrow pickup (79-82) Toyota: 4-Runner (86-Up), FJ Cruiser (07-Up), Landcruiser (69-97), Pickup/Tacoma 4WD and Pre-Runner (80-Up), Sequoia (01-07), T-100 (93-96), Tundra (99-06) NOTE: These spacers are lug centric and are not compatible with hub-centric wheels. Some vehicles above use different size lugs/thread pitch so make sure you measure your vehicle before purchasing. Installation requires one set of open end tape...

  • Brand: 50 Caliber Racing
  • ASIN: B00TOZOU8A

Set of Four (4) Wheel Spacers - 4x137 - 2 inch thick - 10x1.25mm Studs - Fit Can-am Commander / Maverick UTVs [5217]

Set of Four (4) Wheel Spacers - 4x137 - 2 inch thick - 10x1.25mm Studs - Fit Can-am Commander / Maverick UTVs [5217]

Set of Four (4) Wheel Spacers 4 x 137mm - 2" Thick - 10x1.25mm studs - 50 Caliber Racing Need some more clearance or a wider stance for your Can-Am? 50 Caliber Racing precision CNC milled wheel spacers are what you need! Available in various widths so you can get the exact fit for your ride. Fits the following Can-Am models: - Commander 800 (2014-up) - Commander 1000 (2014-up) - Commander 1000 MAX(2014-up) - Maverick 1000 (2014 - up) - Maverick 1000 MAX (2014-up) - all other 4x137 patterns using 10x1.25 pitch studs NOTE:Some vehicles above use different size lugs/thread pitch so make sure you measure your vehicle before purchasing. Installation requires one set of open end tapered lug nuts to bolt the adapter to the vehicle. Most factory lug nuts are not compatible. These are NOT included and are sold separately. Be advised that you may need to modify your existing studs if they protrude past surface of spacers.

  • Brand: 50 Caliber Racing
  • ASIN: B00TFZY9E4
Similar 50 Caliber Wheel Spacers Results
50 Caliber Wheel Spacers Video Results

SEE HOW EASY IT IS TO INSTALL A WHEEL SPACER

50 Caliber Wheel Spacers

Wheel spacers for the Polaris RZR, RZR-S, RZR4, Kawasaki Teryx, CanAm Commander, Yamaha Rhino, Arctic Cat Prowler, Polaris Ranger,

  • Likes: 33
  • View count: 53638
  • Dislikes: 8
  • Comments: 12
Tags: RZR-S,RZR4,Kawasaki Teryx,CanAm Commander,Yamaha Rhino,Arctic Cat Prowler,Polaris Ranger

shaving calipers to fit 15inch rims

50 Caliber Wheel Spacers

fitting 15inch rims on ur rsx

  • Likes: 34
  • View count: 6652
  • Dislikes: 6
  • Comments: 26
Tags: shaving calipers,rsx 15inchrims,track wheels,track rims,15inchtrackwheels,rota,rotarims,sandingca...

SpiderTrax Wheel Spacers: Before/ After

50 Caliber Wheel Spacers

Wheel Spacer Kit,1-1/2 Inch, 5 x 5 Inch, Spidertrax The SpiderTrax Wheel Spacers looks great and it does feel more firmer and more grip-pier when i drive with it. it also allows me to get bigger tires too. -Whats the Point of me putting Wheel Spacers on my Jeep? because Batman told me to.....p...

  • Likes: 154
  • View count: 157116
  • Dislikes: 47
  • Comments: 74
Tags: 1-1/2 Inch,5 x 5 Inch,Spidertrax Before and after,SpiderTrax,Wheel,Spacers,2005,Jeep,Grand,Cherok...

2012 ZX10R brembo caliber installation with spacers

50 Caliber Wheel Spacers

I already did the left side and just showed the right side install. Everything needs to be torqued to the proper specs and installed according to manufacture specs. I did not specify those in this video so please consult the proper sources before attempting this project. I. Noticed nobody had a v...

  • Likes: 0
  • View count: 165
  • Dislikes: 0
  • Comments: 0
Tags: