FPVDrone Power Module V1.0 XT60 Plug Current Sensor for APM2.8 APM2.6 APM Pixhawk Flight Controller

FPVDrone Power Module V1.0 XT60 Plug Current Sensor for APM2.8 APM2.6 APM Pixhawk Flight Controller

The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 6S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection. Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It isnotdesigned to power servos. Use your aircraft's own ESC/BEC for that. Notice: we have many buyer burned this cable when connet it to 6S battery because he solder the cable to our this module cable.please don't connect or solder any other cable on this current cable,otherwise it will be burned Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery . Special for APM2.5.2 APM2.6 Pixhawk flight controller. Specifications: Max input voltage: 28V Max current sensing: 90A Voltage and current measurement configured for 5V ADC Switching regulator output...

  • Color: Yellow
  • Brand: FPVDrone
  • ASIN: B06XFW1X3K
  • UPC: 757450335373

powerday®APM Power Module V1.0 XT60 Plug for APM2.8 APM2.6 APM Pixhawk Flight Controller

powerday®APM Power Module V1.0 XT60 Plug for APM2.8 APM2.6 APM Pixhawk Flight Controller

Max input voltage: 30V , Max current sensing: 90A;Voltage and current measurement configured for 5V ADC;Switching regulator outputs 5.3V and 3A max;6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector;Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.

  • Brand: powerday
  • ASIN: B01CN62MZE
  • UPC: 793631729500

Hobbypower APM Power Module V1.0 XT60 Plug for APM2.8 APM2.6 APM Pixhawk Flight Controller

Hobbypower APM Power Module V1.0 XT60 Plug for APM2.8 APM2.6 APM Pixhawk Flight Controller

Features: The APM Power Module is a simple way of providing your APM FC with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection. Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time. In addition the module also comes with BEC function, you can output 5.3 DC, 3A maximum continuous current for the flight control board to provide a stable power supply. Another signal cable connectors are used in Japan original fittings, non-domestic joint, so APM flight control board and reliable connection between the power supply module. Specifications: Max input voltage: 30V Max current sensing: 90A Size:25*21*9mm Net weight:25g Voltage and current measurement configured for 5V ADC Switching regulator outputs 5.3V and 3A max 6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It isno...

  • Brand: Hobbypower
  • ASIN: B00JWMLWIG
  • UPC: 712096458787

Yosoo Power Module 5.3V DC BEC APM Power Module With XT60 Connectors ARDUPILOT APM 2.5.2 Deans Plug

Yosoo Power Module 5.3V DC BEC APM Power Module With XT60 Connectors ARDUPILOT APM 2.5.2 Deans Plug

Product Description: The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection. Function: Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time. In addition the module also comes with BEC function, you can output 5.3 DC, 3A maximum continuous current for the flight control board to provide a stable power supply. Another signal cable connectors are used in Japan original fittings, non-domestic joint, so APM flight control board and reliable connection between the power supply module. Specifications: Max input voltage: 20V Max current sensing: 90A - Voltage and current measurement configured for 5V ADC Switching regulator outputs 5.3V and 2.25A max 6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio)...

  • Brand: Yosoo
  • ASIN: B00PIMM84G
  • UPC: 702679611395

Dshot® APM2.5.2 APM2.6 Pixhawk Power Module cable V1.0 Output BEC 3A with XT60 Plug

Dshot® APM2.5.2 APM2.6 Pixhawk Power Module cable V1.0 Output BEC 3A with XT60 Plug

Notice: we have many buyer burned this cable when connet it to 6S battery because he solder the cable to our this module cable.please don't connect or solder any other cable on this current cable,otherwise it will be burned Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery Special for APM2.5.2 APM2.6 Pixhawk flight controller Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry) It is not designed to power servos Use your aircraft's own ESC/BEC for that Features: XT60 Plug Max input voltage: 30V Max current sensing: 90A Voltage and current measurement configured for 5V ADC Switching regulator outputs 5.3V and 3A max 6P molex cable plugs directly to APM/Arduflyer 2.5's 'PM' connector Specifications: Dimension(mm): 25 x 21 x 9 Weight(g): 17(include all wire) Dshot is US trademark,all the Dshot products are selling by our own company,we never Authorize other company to sell it

  • Brand: Dshot
  • ASIN: B00S0QMA5E
  • UPC: 885269257842

BangBang APM Power Module with 5.3V DC BEC Available with T or XT60 (1Pc: Plug: T Plug)

BangBang APM Power Module with 5.3V DC BEC Available with T or XT60 (1Pc: Plug: T Plug)

Description: APM Power Module with 5.3V DC BEC Available with T or XT60 Input voltage: 6~30V (2~8S) Output voltage: 5.3V ± 0.1V Maximum output current: 3A Maximum current: 90A Maximum voltage: 30V 6P cable can be directly connected to APM/Pixhawk flight control Additional 4P rows of pin-free to wire/PIN to connect to another flight control Dimensions: 25mm x 21mm x 9mm Weight: 17g (containing all the wire/plug is not included) Package included: 1 x Power Module

  • Brand: New Brand Name
  • ASIN: B06XXNNLRM
  • UPC: 676436156873

New Crius Power Module XT60 Plug for Pixhawk APM2.8 APM2.6 Flight Controller

New Crius Power Module XT60 Plug for Pixhawk APM2.8 APM2.6 Flight Controller

-Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery. -Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry). It is not designed to power servos. Use your aircraft's own ESC/BEC for that. -Features: -Max input voltage: 28V -Max current sensing: 90A -Voltage and current measurement configured for 5V ADC -Switching regulator outputs 5.3V and 3A max -6P molex cable plugs directly to APM/Arduflyer 2.5's 'PM' connector -Dimension(mm): 25 x 21 x 9 -Weight(g): 17(include all wire) -Package content (as picture shows) -Power Module x 1

  • Brand: XSD MOEDL
  • ASIN: B01LXVDUD3
  • UPC: 610600159017

ADSRO APM 2.6 2.8 Pixhawk Power Module V1.0 Output BEC 5V 3A with XT60 Plug New

ADSRO APM 2.6 2.8 Pixhawk Power Module V1.0 Output BEC 5V 3A with XT60 Plug New

DescriptionPower Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery.Special for APM2.5.2 APM2.6 Pixhawk flight controllerNote: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.Features- XT60 Plug- Max input voltage: 30V- Max current sensing: 90A- Voltage and current measurement configured for 5V ADC- Switching regulator outputs 5.3V and 3A max- 6P molex cable plugs directly to APM/Arduflyer 2.5's 'PM' connectorPacking Content1 X Power Module V1.0

  • Color: As Shown
  • Brand: ADSRO
  • ASIN: B01LPVPVOW
  • UPC: 889250994518

APM 2.8 Multifunction Flight Controller Board Flight Control with m8n GPS Folding Antenna Mount Power Module XT60 Connectors

APM 2.8 Multifunction Flight Controller Board Flight Control with m8n GPS Folding Antenna Mount Power Module XT60 Connectors

We wish that you can read wiki and videos of the product before you use,or there will be many troubles in use. Wiki and video you can search in google and youtube. NEO-M8N u-blox module M8N NEO-M8N series offers high sensitivity and minimum acquisition time while keeping system power low. NEO-M8N provide the best RF performance and ease of integration. U-blox M8, can simultaneously acquire and track different GNSS (global satellite navigation) System: Parallel GPS reception (QZSS) and GLONASS or Beidou, or when receiving GLONASS and Beidou. This platform especially suited to the needs of the highest availability and accuracy of GPS performance applications, even under weak signal environment (especially in urban canyons). Because GPS / SBAS operation under clear sky conditions can get an optimal periphery positioning, M8 platform is also equipped with a built-in intelligent automatic switching function. According to the visibility and reliability GNSS satellites automatically switch to a single GNSS mode of operation. Maximum refresh rate up to 18 Hz It can be synchronized to run GPS + GLONASS or GPS + Compass, all aspects of its much superior domestic performance UM220-III. If China's scientific research institutions, government departments, if necessary compass, choose which mo...

  • Brand: ZMR Model
  • ASIN: B077MVD7QF
  • UPC: 646040804477

Polytree Power Supply Module W/bec Apm2 2.5 APM Flight Controller Ardupilot Mega Apm2.6

Polytree Power Supply Module W/bec Apm2 2.5 APM Flight Controller Ardupilot Mega Apm2.6

Voltage and current measurement configured for 5V ADC. Switching regulator outputs 5.3V and 3A max. 6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector. Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It isnotdesigned to power servos. Use your aircraft's own ESC/BEC for that. The maximum input voltage 20V, maximum current measurable 90A, to achieve the control panel on battery power and voltage monitoring. The design parameters of voltage and current detector design parameters consistent with 3DR official ground station (mission planer) settings can be set directly refer to the official Wiki. Type: Module Accessory Type: Hobby Parts Model: Hobby Parts Max Input Voltage: 30V Max Current Sensing: 90A Size: 25mm x 21mm x 9mm/0.98" x 0.83" x 0.35" (Approx.) Package include: 1 x Power Module With XT60 Connectors 1 x P Cable 150mm

  • Brand: Polytree
  • ASIN: B0129HLD3O
  • UPC: 602731839371
Similar Apm Power Module With Xt60 Results
Apm Power Module With Xt60 Video Results

FPV Part 5: 3DR APM 2.6 Setup for Power Module and MinimOSD Battery Voltage.

Apm Power Module With Xt60

In this video we go through the process of getting the flight battery voltage to display on the OSD. The parameters are configured in the Ardupilot Mega 2.6 to support reading the voltage from the 3DR Power Module and output the data to the MinimOSD. To come in the next video we will be using a U...

  • Likes: 305
  • View count: 122651
  • Dislikes: 21
  • Comments: 96
Tags: Setup APM Power Module,apm power module,MinimOSD Battery Voltage.,Power Module,Ardupilot Mega 2.6...

cx20 factory apm power module step by step

Apm Power Module With Xt60

I show how to install a power module on a cheerson cx20 apm 252_V5.0 You can also use the 5 volt bec to power your apm or use for other 5 volt devices. APM2.6 2.8 Pixhawk Power Module V1.0 Output BEC 5V 3A APM Power Module with 5.3V DC BEC banggood link https://goo.gl/tDYR38 //apm power mod...

  • Likes: 27
  • View count: 3384
  • Dislikes: 0
  • Comments: 49
Tags: apm 2.6,apm 2.7,apm 2.8,cx20 remote tx,cx20 remote,cx-20 tx,cx 20 rx,252 apm upgrade,cx20 apm upg...

Power module for PixRacer

Apm Power Module With Xt60

Pixracer Autopilot Xracer V1.0 Flight Controller Mini PX4 Built-in Wifi For FPV Racing RC Multirotor http://www.banggood.com/Pixracer-Autopilot-Xracer-V1_0-Flight-Controller-Mini-PX4-Built-in-Wifi-For-FPV-Racing-RC-Multirotor-p-1056428.html?p=LY27042310222013070W&utm_source=bbs&utm_medium=marko&u...

  • Likes: 5
  • View count: 2192
  • Dislikes: 0
  • Comments: 8
Tags: power module,pixracer

Setting Up the Power Module for APM mini

Apm Power Module With Xt60

How to correctly set up the power module for the APM mini (APM 3.1) flight controller. Buy APM mini here: http://www.banggood.com/MiniAPM-V3_1-Flight-Controller-With-GPS-Module-p-941834.html?p=YF0300109052201301AQ. Buy the power module here: http://www.banggood.com/APM2_6-ArduPilot-Mega-Power-...

  • Likes: 13
  • View count: 5530
  • Dislikes: 5
  • Comments: 16
Tags: APM mini,APM 3.1