RAINPAL Brass Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting

RAINPAL Brass Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting

Advantage of RAINPAL Rain Barrel Spigot Design: You don't need to reach inside of the barrel to install. You only need a small opening(Bung hole is big enough) to install. Install in 6 easy steps: Drill, Drop, Pick, Tighten, Wrap and Tighten. Installation Instruction: Tools needed: Pipe Wrench or Channellock Pliers, Power Drill, 1-1/4 inch Hole Saw, PTFE Thread Tape Drill 1.25 inch hole on rain barrel, Center the hole 2-3 inch above the bottom(use eye protection when operation power tool) Drop the bulkhead fitting male piece with gasket in to the barrel Roll the barrel, pick up the fitting from outside Install bulkhead nut and tighten Wrap about 5 rounds of tape on the spigot thread Insert the spigot and tightenCalifornia prop 65 warning: This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reprocutiove harm.

  • Color: Brass
  • Brand: RAINPAL
  • ASIN: B00NX697C0
  • UPC: 681441045036

Weldless Stainless Steel Ball Valve and Spigot

Weldless Stainless Steel Ball Valve and Spigot

The Fermentap Weldless Spigot is made of 100% stainless steel, ensuring it will be used in your brewing for years to come. It features a 1/2" Full Port ball valve and a 1/2" barb, allowing your wort to pass through unrestricted. A full coupler has been added in the back of the spigot to allow for the addition of any 1/2" Male NPT fitting you need - barb, Compression fitting, etc.

  • Color: Stainless Steel
  • Brand: Learn To Brew LLC
  • ASIN: B0028ZLEE6

Bayou Classic 800-775 Stainless Steel Brew Spigot with 1/2-Inch FNPT/Bulkhead Fittings/Threaded Connector for Filter Screen

Bayou Classic 800-775 Stainless Steel Brew Spigot with 1/2-Inch FNPT/Bulkhead Fittings/Threaded Connector for Filter Screen

The Bayou Classic brew spigot is for serious home brewers. Featuring stainless construction having 1/2" ball valve with locking handle and threaded 1/2" FNPT at each end. Includes bulkhead fittings for a water tight seal consisting of O-rings, threaded connector and bushing for filter screen attachment.

  • Color: Stainless Steel
  • Brand: Bayou Classic
  • ASIN: B008FERHQS
  • UPC: 798527408064

Bayou Classic 1032 Stainless 8-Gallon Stockpot with Spigot and Vented Lid

Bayou Classic 1032 Stainless 8-Gallon Stockpot with Spigot and Vented Lid

This Bayou Classic stainless steel 32 quart stockpot has features for cooks and brewers. The 22 gauge stainless steel provides a solid surrounding for boiling, brewing and steaming. The pot features stamped calibration marks along the side of the pot in gallons and quarts and it has a stainless 1/2 inch ball valve spigot. It also comes with a stainless vented lid.

  • Color: Stainless Steel
  • Brand: Bayou Classic
  • ASIN: B007TV9LSU
  • UPC: 798527594453

RAINPAL RBIO125F Rain Barrel Inlet Outlet DIY Kit (HDPE Fine 2” Bung to 1-1/4” Barbed Fitting and Brass Ball Valve Spigot w/Bulkhead Fitting)

RAINPAL RBIO125F Rain Barrel Inlet Outlet DIY Kit (HDPE Fine 2” Bung to 1-1/4” Barbed Fitting and Brass Ball Valve Spigot w/Bulkhead Fitting)

Installation Instructions: Tools Needed: 1-1/4 inch saw, Power drill, Knife, Pipe Wrench and Thread Tape 1. Center the hole saw drill bit 3-12 inch above the bottom of the barrel (lower position makes you use most of the water, higher position keeps more water and make barrel more stable, higher position also make it easy to dispense the water without using a stand). Drill 1-1/4 inch hole on rain barrel(use eye protection when operating power tool). Then remove any debris, and use a knife to smooth the edges. 2. If your barrel has an open top, you can install the fitting with nut inside or outside. If your barrel has a small opening like a bung hole on top: Drop the bulkhead fitting male piece with the gasket. Roll the barrel; pick up the fitting through the hole you drilled from outside. Or to prevent the gasket from separating from the fitting, you can hook the fitting with a wire, and then run the wire down to the drilled hole. 3. Install the bulkhead fitting nut, turn counter clockwise to tighten, after hand tight, use a pipe wrench to tighten a bit more. 4. Wrap the BASE of spigot threads with Teflon tape (5 rounds) and install the spigot clockwise. If the spigot is not in a desired position, loosen the fitting nut, turn the spigot to the right position then tighten the f...

  • Brand: RAINPAL
  • ASIN: B01NCHRD2Y
  • UPC: 681441045883

Heavy Duty 1/2" Weldless Bulkhead w/ Stainless Steel Valve

Heavy Duty 1/2" Weldless Bulkhead w/ Stainless Steel Valve

Learn To Brew now offers an easy way to add a weldless fitting and not have the frustration of cheap leaky knock offs. Do you have a kettle or cooler but would like the ease and convenience of using a ball valve to easily drain liquid? Are you a Do It Yourself Type person? At a fraction of the cost of having a spigot welded into your kettle you can drill a whole and install a weldless ball valve. The problem with most weldless fittings is they are thrown together from assorted hardware. Common issues include leaking and lots of flex when you use the ball valve. These new weldless fittings feature are designed for brewing. There is no comparison to the weldless fittings of yesterday with their rock-solid feel and a solid leak free connection. This unit is also unique in that it feature 1/2" female threads on the inside. This allows you to thread in various other fittings that you can see below. Want to later make a mashtun... no problem just thread in our stainless screen. Weldless kit includes a 1/2" Full Port ball valve and a 1/2" barb. All fittings are made from 304 type stainless steel for a lifetime of corrosion free use. Full installation directions included. Only Learn To Brew is licensed to sell this item. Any other seller is a knock off.

  • Color: Stainless Steel
  • Brand: Learn To Brew LLC
  • ASIN: B00IFKSIWO
  • UPC: 849731000329

Rain Barrel Garden Spigot Kit - 3/4" PVC Ball Valve Hose Bibb with Bulkhead Fitting Adapter

Rain Barrel Garden Spigot Kit - 3/4" PVC Ball Valve Hose Bibb with Bulkhead Fitting Adapter

Advantages: 1) High premium virgin PVC material 2) Durable 3/4" "SHOTGUN" Ball Valve with easy to turn handle 3) Non-toxic: NO LEAD and No heavy additives4) Corrosion Resistant-unlike other brass material: Resist chemical matters or electron chemical corrosion5) Lower Installation Costs: Light weight and ease of installation6) Kit weighs: 4.9 ounces7) Color: Gray with green handle8) Male and female NPT9) 4mm THICK silicon seal gasket10) Bulkhead can be installed with closed top barrelAvailable in 3/4" SHOTGUN and 1" BABOOZA Ball Valve Kits.For installation video of the bulkhead adapter with closed top barrel, click here: https://www.youtube.com/watch?v=N3_eK5tHyqA

  • Color: Gray/Green
  • Brand: Van Enterprises
  • ASIN: B06XDYWTK5
  • UPC: 604716210663

Concord 1/2" Full 304 Stainless Steel Full Port Ball Valve Kettle Spigot

Concord 1/2" Full 304 Stainless Steel Full Port Ball Valve Kettle Spigot

Full Port 1/2" Ball Valve. Fits onto any 1/2" Fitting.

  • Color: Blue
  • Brand: Concord Cookware
  • ASIN: B00GPEVH7A
  • UPC: 877769004590

RAINPAL 3/4" Full Port Brass Rain Barrel Spigot (RBS030 14GPM)

RAINPAL 3/4" Full Port Brass Rain Barrel Spigot (RBS030 14GPM)

California prop 65 warning: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hand after use. Advantage of Decent Solution Rain Barrel Spigot Design: You don't need to reach inside of the barrel to install. You only need a small opening(Bung hole is big enough) to install. Install in 6 easy steps: Drill, Drop, Pick, Tighten, Wrap and Tighten. Installation Instruction: Tools needed: Pipe Wrench or Channellock Pliers, Power Drill, 1-1/4 inch Hole Saw, PTFE Thread Tape Drill 1.25 inch hole on rain barrel, Center the hole 2-3 inch above the bottom(use eye protection when operation power tool) Drop the bulkhead fitting male piece with gasket in to the barrel Roll the barrel, pick up the fitting from outside Install bulkhead nut, turn clockwise to tighten Wrap about 5 rounds of tape on the spigot thread Insert the spigot and tighten

  • ASIN: B018Q4EV0Q
  • UPC: 681441045319

2wayz Garden Hose Shut Off Valve. Stop Running Around Your Lawn! No Leak Experience - Tight Seal Ball Valve Hose Fitting. Quick Connect Shutoff Coupling With Smooth Long Knobs (4cm!).

2wayz Garden Hose Shut Off Valve. Stop Running Around Your Lawn! No Leak Experience - Tight Seal Ball Valve Hose Fitting. Quick Connect Shutoff Coupling With Smooth Long Knobs (4cm!).

garden hose quick connect shut off Ball valve

  • Color: Straight Valve
  • Brand: 2wayz
  • ASIN: B00R1RX4JO
  • UPC: 784672328715
Similar Ball Valve Spigot Results
Ball Valve Spigot Video Results

Seats & Springs: Repair and Replace (Single Handle | Ball Valve | Bathroom Faucet)

Ball Valve Spigot

In this episode of Repair and Replace, Stephany shows how to replace the seats and springs in a single handle, ball valve style bathroom faucet. If the faucet is leaking, replacing the seats and springs is one way to stop the leak. The rubber seats can wear down over time which can cause the fauc...

  • Likes: 345
  • View count: 36733
  • Dislikes: 11
  • Comments: 28
Tags: Single Handle Faucet,1 Handle Faucet,Single Hole Faucet,Seats and Springs,Cartridge,Delta,Moen,Am...

Ball Valve Bulkhead for Brew Kettles - Installing instructions

Ball Valve Spigot

Bulkhead fitting for kettles or converted Sankey kegs. http://www.northernbrewer.com/shop/weldless-kettle-bulkhead.html View all the great products and community at Northern Brewer America's #1 Homebrew Supplier. http://www.northernbrewer.com

  • Likes: 37
  • View count: 16443
  • Dislikes: 11
  • Comments: 7
Tags: brew pot,brewing kettles,Bulkhead,northern brewer,homebrewing,brew kettle,all grain brewing,home ...

Weldless Ball Valve Installation

Ball Valve Spigot

Installation of my new Weldless Ball Valve into my existing brew kettle

  • Likes: 118
  • View count: 47139
  • Dislikes: 10
  • Comments: 39
Tags: stainless,steel,ball,valve,weldless,fittings,brewing,brew,homebrew,install,installation

Outdoor spigot - ball valve /w floor flange

Ball Valve Spigot

The outdoor spigot is a ball valve with a floor flange screwed to the back. Floor flange was mounted to brick wall (mortar line) for support. A 10" peice of 1/2" copper was soldered to back of ball valve. Then a 1/2" copper-to-pex adapter was soldered to other end of 10" copper tube. Inside hous...

  • Likes: 0
  • View count: 2012
  • Dislikes: 1
  • Comments: 0
Tags: