Tenergy 11.1V 1000mAh Li-Po Airsoft Crane Stock Battery Pack

Tenergy 11.1V 1000mAh Li-Po Airsoft Crane Stock Battery Pack

FeaturesLi-Polymer (LIPO/Li-PO) batteries are the newest available batteries for airsoft and other hobby toys. They are designed as a light weight and high output power source.This 11.1v Li-Po battery can deliver more power than 12v Ni-MH large type battery with a significant reduction in size and the number of battery cells.The Tenergy packs are designed to fit "buffer tube" batteries and will work in most guns that required a stick, crane, or stock nun-chuck battery. *Note: we recommended to double check the battery pack dimensions with the your gun's battery compartment to make sure it fits.SpecificationHigh capacity: 1000mah Mini Tamiya connector Dimension: 101mm x 21mm x 8mm Weight: 75gNote: Please read instructions before using!WARNING - MUST READ BEFORE USE:- ONLY use a LiPO Balance Charger for charging this battery.- DO NOT use a NiMH battery charger to charge this battery.- IMPORTANT: NiMH chargers can be included with your RC Car or Heli purchase - do not use it with this LiPO battery.- INSPECT battery pack for damage (puffiness, broken wires, punctures, etc). If damaged DO NOT charge.**Failure to follow these warnings may result in fire or personal injury.

  • Color: Black
  • Brand: Tenergy
  • ASIN: B009B1OA0A
  • UPC: 844949014748

Valken 11.1v 1200mah 20c Nunchuck Type Lipo Battery Airsoft Crane Stock (Aeg)

Valken 11.1v 1200mah 20c Nunchuck Type Lipo Battery Airsoft Crane Stock (Aeg)

Designed for rear wired AEGs with a crane stock and front wired hand guards with limited battery space.Features:11.1V 1200mAh 20CDimension: 123x 20x 6mm each

  • Color: As pictur
  • Brand: Valken
  • ASIN: B00RVX3FJC
  • UPC: 702024852541

Tenergy 9.6V 5000mAh Crane Stock NiMH Battery Pack for Airsoft

Tenergy 9.6V 5000mAh Crane Stock NiMH Battery Pack for Airsoft

Features and Benefits: Product 9.6V NiMH 5000mAh Crane Stock Battery Pack Make Made of 8 pcs matched high power Sub C NiMH 5000 mAh Connector Mini Male Tamiya connector assembled with 16 AWG wire Fit Models upgraded and/or modified AEG's. Feature - Twice longer firing time than original NiCd Battery - Rapidly charge up and long cycle life Weight 1.25 lb Dimensions Sections: 3 Battery 'Stick' -- 5.25" x 1" 2 Battery 'Stick' -- 3.60" x 1" 2 Battery 'Stick' to Connector-- 5.55" x 1" Each Battery Cell -- 1.67" x 1" Recommended Charger Smart Universal Battery Pack Charger for 6v-12v NiMH Battery Packs Use attention Set charging current to 1A when charging using the above charger for the initial first several charging. Note: To ensure proper fit we recommend to use our battery measurements against your gun's battery compartment.

  • Brand: Tenergy
  • ASIN: B0061Q4ZMQ
  • UPC: 844949006804

Evike - Matrix Airsoft Crane Stock Large Type Battery - 9.6V NiMH (Nickel-Metal Hydride) 4500mAh

Evike - Matrix Airsoft Crane Stock Large Type Battery - 9.6V NiMH (Nickel-Metal Hydride) 4500mAh

• High mAh rating gives you extended time out on the field • Designed specifically for use with large crane stocks • High quality NiMh battery cells Voltage: 9.6V Capacity:4500 mAh Connector: Large Tamiya Manufacturer: Matrix

  • Color: Black
  • Brand: Evike
  • ASIN: B074CM8PBG

Combo: Tenergy 1-4 Cells Li-PO/Li-Fe Balance Charger + Tenergy 11.1V 1000mAh Li-Po Airsoft Crane Stock Battery Pack

Combo: Tenergy 1-4 Cells Li-PO/Li-Fe Balance Charger + Tenergy 11.1V 1000mAh Li-Po Airsoft Crane Stock Battery Pack

Tenergy 1-4 Cells Li-PO/Li-Fe Balance ChargerCharger Features-Built-in balancer. Batteries are automatically balanced during charging-Advanced individual charging method-Automatically charging process-Safer and faster charging for better battery performance-Fits 1S to 4S Li-PO/Li-Fe battery packs with XH type balance connector -Multiple protection features provide maximum safety-Charge Rate: 1A (1,000mah per hour)-Applicable for Li-ion, LiPo and LiFePO4 battery packsWarning- Do Not charge the following types of battery:-Lead acid battery or VRLA -NiMH or NiCD battery pack-Non-rechargeable battery (explosion hazard)-Faulty or damaged battery -Any other types except for LiPo/Li-ion/LiFePO4 battery packsTenergy 11.1V 1000mAh Li-Po Airsoft Crane Stock Battery PackLi-Polymer batteries are the newest available batteries for airsoft and other hobby toys. They are designed as a light weight, high output power source. This 11.1v Li-Po battery can deliver more power than 12v Ni-MH large type battery with only half of the size and a third of the battery cells. The Tenergy packs are designed to fit "buffer tube" batteries and will work in most guns that required a stick, crane, or stock nun-chuck battery.Battery Specifications-High capacity: 1000mah -Mini Tamiya connector -Dimension: 100.5mm...

  • Brand: Tenergy
  • ASIN: B009S9R74Q
  • UPC: 844949016216

g&g airsoft combat machine m4 raider high-performance full metal gearbox aeg rifle w/ integrated ras and crane stock(Airsoft Gun)

g&g airsoft combat machine m4 raider high-performance full metal gearbox aeg rifle w/ integrated ras and crane stock(Airsoft Gun)

The G&G CM16 Raider replica is part of the Combat Machine Range, The Combat Machine replicas are of high quality. The main factor allowing to lower the price is the use of a high quality plastic bodys instead of a metal body. It is also a important fact that the body itself was made of plastic reinforced by fiberglass - just like the front Rail, the stock or almost all plastic elements. The outer barrel, the stock?s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal. The replica is equipped with a reinforced Metal V.2 Gearbox with 8mm ball bearings. Does NOT Include Battery.

  • Brand: G&G
  • ASIN: B005CBQISA
  • UPC: 001001001188

Evike - Matrix 9.6V 2300 mAh NiMH (Nickel-Metal Hydride) high output Airsoft RC battery (Crane Stock Type.)

Evike - Matrix 9.6V 2300 mAh NiMH (Nickel-Metal Hydride) high output Airsoft RC battery (Crane Stock Type.)

Matrix has done it again! This 2300mah is probably the best crane stock battery you can get if you want to stay NiMh instead of going lipo and you have a standard type crane stock. (If you have the Sub C fat type crane stock by Classic Army, you may be able to use the 3000mah, but this one will still fit and fit much easier!) Dimensions: Diameter: 14mm Length: 150mm / 100mm (2 long sticks / Single short stick) Amp: 2300mah Voltage: 9.6V Type / Plug Type: Small Type Tamiya Chemistry: NiMh Cell Size: AA Cell Number: 8 Wrapping: Black Common FAQ / Battery 101: • NiMh battery does NOT require discharging. At any battery level, you can just charge it up to full • The "Crane" configuration is perfect for crane stocks widely used by different manufacturers • If your application has a "large tamiya plug" all you need is an adapter • Amp = Capacity. The higher the Amp the longer you can use it before recharging. Voltage = Power. The higher the voltage, the faster your motor turns, and the more power your motor will have Charging 101: Charging time with a standard wall charger, when the battery is complete empty is ~6 hours. Smart charger recommended (A smart charger can charge NiMh batteries at any time and stop charging when the battery is full. Always monitor battery charging...

  • Color: Black
  • Brand: Evike
  • ASIN: B074CJVYJS

Evike - Matrix High Performance 11.1V 15C 1800 mAh LiPo (Lithium Polymer) Battery Pack (PTW / Crane Stock Type)

Evike - Matrix High Performance 11.1V 15C 1800 mAh LiPo (Lithium Polymer) Battery Pack (PTW / Crane Stock Type)

Dimension: 140mm L / 75mm L (Large Stick / Small Stick) Plug type: Small Tamiya Charging plug type: BMS / XH 4-Pin Charging Connector Specifications: 11.1 V / 1800 mAh Output: 15C - Continuous / 25C - Burst Charger: Not Included. Lithium Polymer / Li-Poly Chargers Only (BMS / XH 4-Pin Charging Connector) Application: To power Airsoft AEG guns. To increase rate of fire, pull high power springs, increase trigger response time, and to improve the over-all clean look of your AEG

  • Color: Black
  • Brand: Evike
  • ASIN: B0746TR12C

VB-Power Airsoft 9. 6V Ni-MH Crane Stock Type AEG Battery - 2000 MAH

VB-Power Airsoft 9. 6V Ni-MH Crane Stock Type AEG Battery - 2000 MAH

This is a premium VB-Power high-quality NIMH rechargeable battery for use in most rear wired, crane stock equipped airsoft AEGs. The three stick configuration allows you to fit this battery in most smaller size airsoft crane stocks, with the third (two cell) stick fitting inside of the buffer tube. This battery is designed for rear wired, crane stock equipped AEGs, however, it may also work with other full stock, rear wired AEGs. Top-notch quality for premium performance, this 9.6V battery provides a much faster rate of fire than standard 8.4V batteries. VB-Power batteries are well known in the R/C hobby market and are considered a premier airsoft battery on the European market. Airsoft Megastore is the FIRST retailer in the US to bring customers this high-quality, high-performance battery at an absolutely unbeatable price! VB-Power battery cells go through the same rigorous testing and quality control processes as Intellect batteries do and are backed by a community of satisfied customers. If you are looking for a great deal on a high performance battery, VB-Power is your best option!

  • Brand: VB-Power Airsoft
  • ASIN: B00FRRD6MU
  • UPC: 840380119158

Tenergy 7.4V Airsoft Battery, 1000mAh High Capacity LiPO Butterfly Battery Pack, Rechargeable Hobby Battery Pack with Mini Tamiya Connector

Tenergy 7.4V Airsoft Battery, 1000mAh High Capacity LiPO Butterfly Battery Pack, Rechargeable Hobby Battery Pack with Mini Tamiya Connector

FeaturesLi-Polymer (LIPO/Li-PO) batteries are the newest available batteries for airsoft and other hobby toys. They are designed as a light weight and high output power source.This 7.4v Li-Po battery can deliver more power than 7.2v Ni-MH large type battery with a significant reduction in size and the number of battery cells.The Tenergy packs are designed to fit "buffer tube" batteries and will work in most guns that required a stick, crane, or stock nun-chuck battery. *Note: we recommended to double check the battery pack dimensions with the your gun's battery compartment to make sure it fits.Specification High capacity: 1000mah Mini Tamiya connector Dimension: 101mm x 21mm x 8mm Weight: 47gNote: Please read instructions before using!WARNING - MUST READ BEFORE USE:- ONLY use a LiPO Balance Charger for charging this battery.- DO NOT use a NiMH battery charger to charge this battery.- IMPORTANT: NiMH chargers can be included with your RC Car or Heli purchase - do not use it with this LiPO battery.- INSPECT battery pack for damage (puffiness, broken wires, punctures, etc). If damaged DO NOT charge.**Failure to follow these warnings may result in fire or personal injury.

  • Brand: Tenergy
  • ASIN: B009B1FQA8
  • UPC: 844949014779
Similar Crane Stock Airsoft Battery Results
Crane Stock Airsoft Battery Video Results

How to use your Airsoft crane stock and battery

Crane Stock Airsoft Battery

Facebook page: https://www.facebook.com/echo1usa Products used in video: Stock knobs: http://www.echo1shop.com/collections/replacement-parts/products/echo1-er25-crane-stock-knob-2pcs Crane Stock: http://www.echo1shop.com/collections/replacement-parts/products/echo1-er25-stock Butt Pad: http://ww...

  • Likes: 116
  • View count: 22249
  • Dislikes: 10
  • Comments: 24
Tags: Airsoft (Sport),Review,Crane (Product Category),airsoft,battery,m4,lipo,numchuck,review,how to,di...

How To: Put a Nun-chuk Battery into Your AEG Crane Stock

Crane Stock Airsoft Battery

How to put a ni-cad nun-chuk battery into your AEG Crane Stock. Gun being demonstrated on is a G&G GR-15 Raider.

  • Likes: 200
  • View count: 24200
  • Dislikes: 27
  • Comments: 58
Tags: Airsoft,G&G,GR-15,Raider,Crane,Stock,Battery,nun,chuck,ni-cad

G&P Crane Stock Removal and battery installation

Crane Stock Airsoft Battery

This video will show new users how to install your butteryfly/crane stock style battery into their G&P AEG.

  • Likes: 253
  • View count: 49670
  • Dislikes: 17
  • Comments: 50
Tags: Stock,Crane,butter,fly,type,battery,how,to,install,G&P,help,Evike,custom,AEG,Eviketv,Eviketech,tu...

How to Put a 9.6V Battery in a Crane Stock (Airsoft)

Crane Stock Airsoft Battery

duh.

  • Likes: 106
  • View count: 13901
  • Dislikes: 8
  • Comments: 26
Tags: Battery,9.6,9.6v,volt,crane,stock,airsoft,m4,m4a1,carbine,aeg,electric,hot,put,in,usafairsofter93...