Fluke VPS220-R 5 Piece Double Insulated Voltage for 190 Series ScopeMeter, 1.2m Cable Length, 100:1 Attenuation, Red

Fluke VPS220-R 5 Piece Double Insulated Voltage for 190 Series ScopeMeter, 1.2m Cable Length, 100:1 Attenuation, Red

Probe set includes 600V CAT III / 1000V CAT II rated 100:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for probe tip. Attenuation: 100:1. Bandwidth: 200 MHz. Maximum input voltage 1000V CAT II or 600V CAT III. Maximum voltage to ground: 1000V CAT II or 600V CAT III per IEC / EN61010-031. Input resistance: 100 mega ohms. Input capacitance: 4.6 pF. Compensation range: 10 to 25 pF. Cable length: 1.2m. Color: red. UL listed.

  • Color: Red
  • Brand: Fluke
  • ASIN: B00588UZOU
  • UPC: 095969435833

Fluke Networks QuickClean-MPO-5P Fiber Optic Quick Clean Cleaner for MPO/MTP Connector (Pack of 5), Fiber Tester Accessory

Fluke Networks QuickClean-MPO-5P Fiber Optic Quick Clean Cleaner for MPO/MTP Connector (Pack of 5), Fiber Tester Accessory

The Fluke Networks NFC-IBC-MPO OneClick Cleaner is designed used to clean MPO/MTP connectors with either UPC or APC polished ferrules. Unlike traditional swab cleaners that rely on the technique of the user, the IBC OneClick Cleaners provide consistent cleaning every time. The user can easily engage the cleaner using a simple push motion and the user will hear a “click” sound when the process is completed. With the click of a button, any fiber installer or data center technician can clean up to 500+ fiber ports. These cleaners are designed to fit into pockets without contamination from dirt and grease.

  • Brand: Fluke Networks
  • ASIN: B005SZ4OWW
  • UPC: 754082092445

Fluke Networks TS100-PRO-BT-TDR Cable Fault Finder TDR Kit with Bridge Tap Detect

Fluke Networks TS100-PRO-BT-TDR Cable Fault Finder TDR Kit with Bridge Tap Detect

Invest in the right tool for all your technicians. The new TS100 PRO Cable Fault Finder with PowerBT Bridge Tap Detect not only provides open/short circuit detection-to 8,000 feet (2.4 kilometres)-but is also a telecom technician's first line of defense against bridge taps. Because bridge taps are a significant source of DSL network performance problems, they need to be identified and fixed quickly before causing customer attrition. The TS100 PRO can accurately locate multiple bridge taps in seconds on up to 3,200 feet (975 metres) of cable with the touch of a button.Maximum Length Measurement: 1.52 Mile

  • Brand: Fluke Networks
  • ASIN: B0067O0RAG
  • UPC: 754082084037

Fluke VPS210-G 5 Piece Double Insulated Voltage for 190 Series ScopeMeter, 1.2m Cable Length, 10x Attenuation, Gray

Fluke VPS210-G 5 Piece Double Insulated Voltage for 190 Series ScopeMeter, 1.2m Cable Length, 10x Attenuation, Gray

Probe set includes 600V CAT III / 1000V CAT II rated 10:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for probe tip. Attenuation: 10x. Bandwidth: 200 MHz. Maximum input voltage: 1000V CAT II or 600V CAT III. Maximum voltage to ground: 1000V CAT II or 600V CAT III per IEC / EN61010-031. Input resistance: 10 mega ohms. Input capacitance: 12 pF. Compensation range: 10 to 22 pF. Cable length: 1.2m. One gray. UL Listed.

  • Color: Gray
  • Brand: Fluke
  • ASIN: B00588UZH2
  • UPC: 095969435789

Fluke VPS101 5 Piece Double Insulated Voltage Probe Set, 1.2m Cable Length, 1x Attenuation, Black, For 190 Series ScopeMeter

Fluke VPS101 5 Piece Double Insulated Voltage Probe Set, 1.2m Cable Length, 1x Attenuation, Black, For 190 Series ScopeMeter

Probe set includes 300V CAT III rated, 1:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for probe tip. Attenuation: 1x. Bandwidth: 30 MHz. Maximum input voltage: 300V CAT III. Maximum voltage to ground: 600V CAT III per IEC / EN61010-031. Input resistance: 1 mega ohms. Input capacitance: 42 pF plus input capacitance of instrument. Cable length: 1.2m. 1 year warranty. One black. UL Listed.

  • Brand: Fluke
  • ASIN: B00588UZFO
  • UPC: 095969435857

Fluke Networks CIQ-IDK57 Remote Identifier Kit, Numbers 5-7 for CableIQ Network Cable Tester

Fluke Networks CIQ-IDK57 Remote Identifier Kit, Numbers 5-7 for CableIQ Network Cable Tester

Fluke Networks CIQ-IDK57 CableIQ Remote Identifier Kit includes remote identifier numbers 5-7

  • Brand: Fluke Networks
  • ASIN: B0007RTPAW
  • UPC: 754082031987

Fluke 1550C Insulation Resistance Tester 5 kV, with measurement storage and PC interface

Fluke 1550C Insulation Resistance Tester 5 kV, with measurement storage and PC interface

The Fluke 1550C insulation resistance testers, offer digital insulation testing up to 10kV, making them ideal for testing a wide range of high voltage equipment including switchgear, motors, generators and cables. Fluke insulation testers can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating. With measurement storage and PC interface, the 1550C is the perfect tool for preventative or predictive maintenance programs designed to identify potential equipment failures before they occur. The Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety. The automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup. The guard system eliminates the effect of surface leakage on high-resistance measurements. It has a large digital/analog LCD for easy viewing with a timer that has a setting for up to 99 minutes for timed tests. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep bu...

  • Brand: Fluke
  • ASIN: B0044XJNCK
  • UPC: 095969550918

Fluke I1000S Large AC Current Probe, 600V AC Voltage, 1000A rms Current, 5 Hz to 100 kHz

Fluke I1000S Large AC Current Probe, 600V AC Voltage, 1000A rms Current, 5 Hz to 100 kHz

The Fluke i1000s is a clamp-on AC current probe designed to expand oscilloscope applications in industrial and power environments. Ideal for measuring distorted current waveforms and harmonics. Allows accurate measurement of currents from 100 mA to 1000 A rms, 5 Hz to 100 kHz without breaking into the circuit. A passive filter eliminates noise and ring on rapidly rising di/dt waveform, ensuring accurate screen displays. Connects directly to an oscilloscope through a reinforced coaxial cable and an insulated BNC connector. Can be used with Multimeters with optional PM9081/001 BNC/Banana adapter. One year warranty. Nominal current range: 10 A, 100 A, 1000 A. Continuous current range: 0.1 A - 10 A, 0.1 A - 100 A, 1 A - 1000 A. Maximum non-destructive current: 2000 A. Lowest measurable current: 0.1. Basic accuracy: 1 percent + 1 A (48-65 Hz), (percent reading + floorspec). Useable frequency: 5 Hz - 100 kHz. Output levels: 100 mv/A, 10 mv/A, 1 mv/A. Safety: CAT III, 600 V,

  • Brand: Fluke
  • ASIN: B000LDQ3SE
  • UPC: 095969090476

Fluke VPS210-R 5 Piece Double Insulated Voltage for 190 Series ScopeMeter, 1.2m Cable Length, 10x Attenuation, Red

Fluke VPS210-R 5 Piece Double Insulated Voltage for 190 Series ScopeMeter, 1.2m Cable Length, 10x Attenuation, Red

Probe set includes 600V CAT III / 1000V CAT II rated 10:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for probe tip. Attenuation: 10x. Bandwidth: 200 MHz. Maximum input voltage: 1000V CAT II or 600V CAT III. Maximum voltage to ground: 1000V CAT II or 600V CAT III per IEC / EN61010-031. Input resistance: 10 mega ohms. Input capacitance: 12 pF. Compensation range: 10 to 22 pF. Cable length: 1.2m. Color: red. UL Listed.

  • Color: Red
  • Brand: Fluke
  • ASIN: B00588UZIQ
  • UPC: 095969435772

Fluke Networks MS2-IDK27 MicroScanner2 for Microscanner2 Network Cable Test

Fluke Networks MS2-IDK27 MicroScanner2 for Microscanner2 Network Cable Test

Fluke Networks MS2-IDK27 Remote Identifier Kit includes far-end identifiers 2-7 for use with the MicroScanner2 (not included). Use these identifiers to test telephone jacks, Ethernet jacks and CATV outlets right out of the box.

  • Brand: Fluke Networks
  • ASIN: B000QJ1D10
  • UPC: 777785731756
Similar Fluke Cat 5 Cable Tester Results
Fluke Cat 5 Cable Tester Video Results

How to Use a Fluke DTX-1800 Cable Analyzer

Fluke Cat 5 Cable Tester

Rent the Fluke DTX 1800 here: https://www.atecorp.com/products/fluke-networks/dtx-1800.aspx Covers the set up and testing for cat 5 and cat 6 permalink, as well as using the fiber optic modules for testing. Includes some troubleshooting tips and common problems one may run across while using this...

  • Likes: 169
  • View count: 206027
  • Dislikes: 34
  • Comments: 26
Tags: fluke,cable analyzer,how to use,fluke dtx,dtx-1800,fluke dtx-1800,fiber optic cable analyzer,cat5...

CableIQ Copper Qualification Tester by Fluke Networks

Fluke Cat 5 Cable Tester

Learn more about the CableIQ Copper Qualification Tester http://www.flukenetworks.com/enterprise-network/network-testing/CableIQ-Qualification-Tester?ls=yt CableIQ Copper Qualification Tester troubleshoots and qualifies cabling speed (10/100/1000/VoIP). Qualify copper cabling in less than 4 seco...

  • Likes: 64
  • View count: 73043
  • Dislikes: 2
  • Comments: 6
Tags: copper cable qualification,copper cable verification,copper cable tester,copper cable testing,cop...

Test Cable using IntelliTone™ Pro 200 LAN Toner and Probe

Fluke Cat 5 Cable Tester

Digital network cable toner and probe traces and locates cables on active network.

  • Likes: 24
  • View count: 24101
  • Dislikes: 10
  • Comments: 0
Tags: YouTube Editor,fluke intellitone pro 200 review,fluke intellitone pro 200 manual,test cable activ...

How to Use the Fluke Versiv Series Part 1: DSX-5000 Cable Certifier

Fluke Cat 5 Cable Tester

Rent Fluke Versiv equipment here: http://www.atecorp.com/products/fluke-networks/dsx-5000.aspx The Fluke Versiv series brings the capability to test, certify, troubleshoot and analyzer the characteristics of wire-line networks, both fiber optic and copper. Part 1: Fluke Networks DSX-5000 setup, c...

  • Likes: 107
  • View count: 75351
  • Dislikes: 4
  • Comments: 10
Tags: fluke versiv,fluke dsx-5000,rent fluke dsx-5000,how to use,how to,cable certifier,fluke software,...