Bel-Art Small Molded Polyethylene Benchtop Fume Hood with Acrylic Sash; 27 x 13 x 22 in. (H50000-0002)

Bel-Art Small Molded Polyethylene Benchtop Fume Hood with Acrylic Sash; 27 x 13 x 22 in. (H50000-0002)

Bel-Art Portable Polyethylene Fume Hoods, SCIENCEWARE H500000002 Benchtop Fume Hood

  • Brand: SP Scienceware
  • ASIN: B002VBWARC

Techtongda VD-650 Vertical Flow Hood Air Flow Clean Bench Workstation for Lab and Industry 220V(Item#160555)

Techtongda VD-650 Vertical Flow Hood Air Flow Clean Bench Workstation for Lab and Industry 220V(Item#160555)

Exterior sizes: 28.35*24.02*35.83 inch (72*61*91 cm), 139lbs (63kg) Item Included:160555*1

  • Brand: Packaging Supply
  • ASIN: B01MYOL3YD
  • UPC: 603097534894

Worksurface for Clean Aire II Fume Hood - Clean Aire II Ductless Fume Hoods

Worksurface for Clean Aire II Fume Hood - Clean Aire II Ductless Fume Hoods

This self-contained hood unit comes equipped with an integral exhaust blower and carbon filter, which do not require duct or venting to the outside. Small quantities of solvents, acids, and odors are quickly absorbed in an activated carbon filter which recirculates air back into the room, thus avoiding installation and energy cost. Hood is ideal for laboratories that require multiple locations or where space is limited. Equipped with 115V exhaust blower, vapor proof light switch, and power cord, unit is fully assembled. Filters, worksurface, and base stands are available separately.

  • Brand: HEMCO CORPORATION
  • ASIN: B0732987M9

Labconco 6938200 Paramount Carbon Filter, Organic Vapor

Labconco 6938200 Paramount Carbon Filter, Organic Vapor

Carbon-based and HEPA filters used in a variety of Labconco enclosures require periodic replacement. Select the right filters to fit your Labconco product.

  • Brand: Labconco
  • ASIN: B00BWXJR3U

Laminar Flow Hood 0.25-0.45m/s Air Velocity Laminar Flow Hood Filter VD-650 Air Clean Bench Fume Hood Laboratory (Laminar Flow Hood, Vertical)

Laminar Flow Hood 0.25-0.45m/s Air Velocity Laminar Flow Hood Filter VD-650 Air Clean Bench Fume Hood Laboratory (Laminar Flow Hood, Vertical)

Introduction Air comes into plenum chamber through primary air filter at the top and centrifugal fan. Then air is blown out through high efficiency air filter from the top of the operation area. That will form high-degree clean vertical air curtain and remove natural air in working area. After five minutes, it will achieve a high-degree clean space. This equipment adopts adjustable fan to regulate air volume in double speed and touch switch adjusts the voltage. That will ensure that the wind speed of working area always in an ideal state Parameters Model: VD-650 Cleanliness: Class 100(Fed 209E) No.of colony: Dish(90) H Air velocity: 0.25-0.45m/s(Adjustable) Noise: ≤62dB(A) Half peak vibration: ≤0.5Um(x,y,z Direction) Lllumniation: ≥300Lx Power supply: AC 110V/60Hz Maximum power: 200W Weight: 50kg Working dimensions: 19"x15"x18"/48.26X38.1X45.72cm Overall dimension: 25"x20"x33"/63.5x50.8x83.82cm For persons: Single /sided Size&No. of HEPA: 18.8"X18"X1.5"/47.75x45.72x3.81cm Size &No. of light or UV lamp: 10WX1/10WX1

  • Brand: Mophorn
  • ASIN: B07149WYLV
  • UPC: 719034813202

LabGenius MI0101001 Mini-Vortex Mixer, Blue(Top)/Clear(Body)

LabGenius MI0101001 Mini-Vortex Mixer, Blue(Top)/Clear(Body)

The LabGenius Mini-Vortex Mixer is a tiny titan specifically designed for shaking test tubes. Simply push the tube into the soft attachment to start shaking. Shaking stops as soon as you lift out the test tube. Full containers of 50mL can be activated for mixing within 5 seconds! The unit operates at a fixed speed of 3,000 rpm with an orbital diameter of 5.5 mm. Remarkably small footprint – just 4 inch diameter – and compact structure are perfect for the limited spaces of bench tops and fume hoods. It also has patented foot pads that keep the petite unit firmly in place while mixing. Its power supply meets CE, cULus, CCC, SAA, FCC and GS standards. Weight is just 0.55kg.

  • Color: Blue (top)/ Clear (body)
  • Brand: LabGenius
  • ASIN: B01CLLBZ6S

Terra Universal 1688-43 ValuLine WhisperFlow Benchtop Laminar Flow Hood with Spill Tray, Horizontal Flow, 25" Height, 49" Width, 39.5" Length, Polypropylene

Terra Universal 1688-43 ValuLine WhisperFlow Benchtop Laminar Flow Hood with Spill Tray, Horizontal Flow, 25" Height, 49" Width, 39.5" Length, Polypropylene

This versatile laminar flow hood gives you a particle-free work environment on any available work surface. FFU: Quiet, Reliable Operation It consists of two modules: a polypropylene hood and a fan/filter unit with HEPA particle filter rated at 99.99% efficient with 0.3 micro particles (order hood and FFU separately). Its internal baffle system ensures uniform face velocity, and its 50 dBA noise rating ensures quiet operation. The low vibration level ensures minimal disruption of high-precision assembly or test procedures performed inside the hood. ULPA FFUs, rated 99.99% efficient @ 0.12 µm particles, along with ionization units are also available. Sturdy, Chemical-Resistant Polypropylene Construction The 0.5" (13 mm)-thick polypropylene construction offers excellent chemical compatibility, durability, and cleanliness. A hinged front access shield, made of static-dissipative PVC, restricts the air exit and enhances laminar flow. Continuous seams and coved corners simplify cleaning.

  • Brand: Terra Universal
  • ASIN: B01N5K6EWG

Bel-Art F18788-2001 Poxygrid “Half-Size” Test Tube Rack; 18-20mm, 20 Places, 4¹⁵/₁₆ x 4¹/₄ x 2¹/₂ in., Blue

Bel-Art F18788-2001 Poxygrid “Half-Size” Test Tube Rack; 18-20mm, 20 Places, 4¹⁵/₁₆ x 4¹/₄ x 2¹/₂ in., Blue

The Bel-Art Scienceware 187882001 Steel poxygrid half-size wire test tube rack holds 20 18 to 20mm test tubes in classroom and laboratory settings. The blue epoxy-coated steel wire construction is chemical and corrosion resistant, and is impervious to organic solvents, salts, weak acids, and weak alkalis. The rack withstands temperatures from -369 to +250 degrees F/-223 to +121 degrees C and is autoclavable. The half-size rack is designed for use in small places including water baths, under fume hoods, and other limited space locations. It is 4.25 x 4.9 x 2.44 inches/108 x 125 x 62mm (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)Bel-Art Products manufactures scientific products, including labware, testing equipment, and safety supplies, under the Bel-Art and Scienceware brands. The company, founded in 1946, is headquartered in Wayne, NJ.

  • Color: Blue
  • Brand: SP Scienceware
  • ASIN: B002VA5V9W

Vented Enclosure Fume Hood - 2 Foot

Vented Enclosure Fume Hood - 2 Foot

These units are ideal for containment of powders and fumes during compounding or weighing. We offer features that are very important in terms of safety that are not found with any other competitive products.Weigh Stations are the best method of rendering fumes & particulates harmless, creating a safer working environment and preventing harmful emissions being exhausted into the atmosphere. Utilizing the most advanced carbon and HEPA filtration, Air Science, USA weighing stations offer flexibility of design, according to your requirements. Our turbulent free design provides a Airflow Pattern smooth transition of airflow into the enclosure. The air is then pulled across the work surface in a horizontal and uniform airflow pattern and drawn into the rear slotted plenum. This design reduces the 'rolling' affect found in conventional fume hoods and keeps balances stable even when weighing in the microgram accuracy. The hose that attaches to this plenum can either be connected to our fume extractor (Sold Separately VEFE) or directly to your in-house exhaust ventilation system. Each unit is provided with an 8 ft PVC heavy walled flex hose that contains a steel wire helix. The smooth inner surface insures minimal pressure drop and friction loss.Typical Applications include Short duration...

  • Brand: Air Science
  • ASIN: B0095ZFVRS

Labconco 110410002 Protector XStream Laboratory Hood, 4' Nominal Width, 2 Service Fixtures and 1 Electrical Duplex

Labconco 110410002 Protector XStream Laboratory Hood, 4' Nominal Width, 2 Service Fixtures and 1 Electrical Duplex

During independent testing, the Protector XStream Hood was challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open, the Protector XStream was subjected to 50 fpm cross drafts, NIH protocol, and tracer gas measurements in the chest of the mannequin. In all scenarios, the Protector XStream allowed 0.00 ppm average level of tracer gas outside the fume hood. Although your safety officer or industrial hygienist will determine the actual face velocity setting for your laboratory, the ability of the Protector Hood to contain under these adverse conditions sets a new standard of safety. Safety is foremost, but energy savings is equally impressive. Although face velocity is a factor, it's the volumetric rate (CFM) that determines the energy consumption of a fume hood. Operating a 6' Protector XStream Hood at 60 fpm face velocity, with the sash in its fully open position, requires only 690 CFM. Regardless of your desired operating face velocity, the Protector XStream yields the lowest required CFM.

  • Brand: Labconco
  • ASIN: B00BWXSBP0
Similar Laboratory Fume Hoods Results
Laboratory Fume Hoods Video Results

CHC LAB FUME HOOD (Ventilation System)

Laboratory Fume Hoods

Copyright Ⓒ 2016 Advanced Laboratory System CHC LAB. All rights reserved

  • Likes: 45
  • View count: 13162
  • Dislikes: 2
  • Comments: 1
Tags: chclab,fumehood,labfurniture,bsc,chc,lab,safety

Chemical Fume Hood Animation in English

Laboratory Fume Hoods

a laboratory safety project by Dartmouth College & The National Institute of Health "Chemical Fume Hood: How it Works to Protect You"

  • Likes: 102
  • View count: 60456
  • Dislikes: 29
  • Comments:
Tags: chemical,fume,hood,laboratory,safety,biomedical,animation,dartmouth,michael,blayney

Proper use of a fume hood

Laboratory Fume Hoods

How to use your laboratory fume hood properly

  • Likes: 49
  • View count: 39766
  • Dislikes: 1
  • Comments: 5
Tags: fume,hood,fumehood,berkeley,EH&S,laboratory,lab,safety

Laboratory Fume Hoods

Laboratory Fume Hoods

  • Likes: 2
  • View count: 3633
  • Dislikes: 2
  • Comments: 0
Tags: