ABN Dent Puller Suction Cup, 5” Inch – Large Dents Remover for Pulling Automotive Car Hail and Door Ding Damage

ABN Dent Puller Suction Cup, 5” Inch – Large Dents Remover for Pulling Automotive Car Hail and Door Ding Damage

To remove dents on your vehicle's body, use the ABN Dent Puller Suction Cup, 5" Inch - Large Dents Remover for Pulling Automotive Car Hail and Door Ding Damage. This suction gripper and dent remover pulls out dings and large dents on metal and even plastic. It is reusable and can be used on large and difficult areas where a smaller suction cup puller couldn't reach. Prior to use, clean the area and wet the cup to improve contact. Push the cup firmly onto the surface, lock the suction lever, and swirl the suction in broad sweeps. You can also use it on glass as an anchor point for hauling cargo. It can hold up to 90 pounds! The ABN plastic includes a spring-loaded locking handle, and the rubber allows for gentle and scratch-free use. This package includes (1) 5" Inch Dent Suction Cup.

  • Brand: ABN
  • ASIN: B01CRKCGDE
  • UPC: 617209844290

CTA Tools 4305 Large BMW Hub Puller

CTA Tools 4305 Large BMW Hub Puller

CTA Tools 4305 Large Hub Puller is expertly designed and crafted to the exacting quality standards expected from CTA Tools. The Large Hub Puller features an improved design with a widened hole footprint to accommodate larger 5 x 120-Millimeters lug patterns. The Large Hub Puller includes an internally machined yoke, with a 75-Millimeter recessed opening that has been designed to fit over larger flanges. The Large Hub Puller also includes a 90-Millimeters / 7-1/2-Inch long bolt for more applications when flange pulling and axle pushing. The Large Hub Puller will service a much wider range of applications, including most automobiles. Whether tuning up your '68 Corvette or changing the oil on a John Deere tractor, CTA can supply you with the tools needed to do the job. California Prop 65 - Warning, This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

  • Brand: CTA Tools
  • ASIN: B00VX0S7YW
  • UPC: 053001043057

Craftsman 2 Jaw Large Gear Puller. Mechanics & Auto Tool.

Craftsman 2 Jaw Large Gear Puller. Mechanics & Auto Tool.

Craftsman 2-jaw large gear puller gets jobs done quickly with the reversible grips that give the custom hold eliminating slip that could easily damage equipment. Put the end tip in or out and swap the two arms end-to-end to easily to remove gears, pull auto axles, replace damaged shaft bearings and more. The heavy-duty 2-jaw large gear puller is smooth to use with its adjustable reach, completing jobs faster and with less damage than a hammer and pry-bar. It's a time and energy saver for repair work, whether at home or at the shop. A 12 inch width and 8.5 inch depth give you an expansive grip area, ensuring that from pulley to sprocket, you get the power you need to get the job done. Craftsman 2-jaw large gear puller features reversible grips of two identical arms Use the one-piece tool to remove gears, pull auto axles and more Swap the two arms end-to-end and put the tip end in or out, for the custom hold you desire Made of high alloy steel, strong and rust-resistant Overall dimensions: 1" x 12" x 8.5" Includes Craftsman Lifetime Warranty

  • ASIN: B00LNMUO1Y
  • UPC: 730133648205

Brady 65280 7-1/2" Long, Yellow Color Safe-T-Grip Fuse Puller (Large)

Brady 65280 7-1/2" Long, Yellow Color Safe-T-Grip Fuse Puller (Large)

Brady 65280 safe-t-grip fuse puller (large). For use on 0-100A, 250V and 600V fuses. Remove or replace cartridge fuses with ease with our safe-t-grip fuse pullers. Their notched handles mean no-slip grip. Amperage ranges are clearly marked and both types exceed MIL specifications. For use with 0-100A, 250V and 600V fuses and is 7-1/2" long. Electrical tool type of device. Measures 7-1/2" Long. Color is yellow.

  • Color: Yellow
  • Brand: Brady
  • ASIN: B003XU7LH4
  • UPC: 754473652807

Bondo 956 Double Handle Locking Suction Cup Dent Puller

Bondo 956 Double Handle Locking Suction Cup Dent Puller

Bondo Locking Suction Cup Dent Puller has 300 times more suction than other non-locking suction cup dent pullers. It can pull out large dents without leaving holes behind that need to be filled.

  • Color: red
  • Brand: 3M
  • ASIN: B000KXA6HY
  • UPC: 076308009564

OTC 6980 Heavy Duty Brake Drum and Rotor Puller

OTC 6980 Heavy Duty Brake Drum and Rotor Puller

The OTC heavy duty brake drum and rotor puller handles large components such as brake drums, rotors, drive wheels, gears, flywheels and pulleys. One person can easily set the tool in place and use for tough pulls even where there is little access to insert the jaws. Can be used with air tools to reduce time and fatigue. Spread is up to 12-3/4 Inch with a reach of 5 inch. 7-tons of force, yet weighs less than 10 pounds.

  • Brand: OTC
  • ASIN: B004CGOGFS
  • UPC: 731413557675

Biltek NEW 3 Jaw Gear Pulley Bearing Puller 3pc Set 3" 4" 6" Small Leg Large Mechanics

Biltek NEW 3 Jaw Gear Pulley Bearing Puller 3pc Set 3" 4" 6" Small Leg Large Mechanics

NEW 3pc Three Jaw Gear Pullers 3" / 4" / 6". Applies Even Pressure to Remove Gears, Pulleys, Bearings, and Flywheels from Shaft without Damage.Features:3pc Three Jaw Gear Pullers 3" / 4" / 6"Applies Even Pressure to Remove Gears, Pulleys, Bearings, and Flywheels from Shaft without DamageDrop Forged, Heat Treated Steel Jaws with Corrosion-Resistant Finish Inside/Outside Reversible Hooked JawsSpecifications:Sizes: 3", 4", 6"Condition: 100% Brand NewPackage Includes: 1x 3" Three Jaw Gear Puller1x 4" Three Jaw Gear Puller1x 6" Three Jaw Gear PullerInstructions not included

  • Brand: Biltek
  • ASIN: B00K3264AU

OTC (522) Large Gear and Pulley Puller

OTC (522) Large Gear and Pulley Puller

The OTC 522, with this tool you can easily remove a wide range of gears, pulleys or other parts that have tapped holes. It's simple to use and easy to store.

  • Brand: OTC
  • ASIN: B000OQKJB0
  • UPC: 031113145821

Lisle 41970 Heavy Duty Pitman Arm Puller for Ford

Lisle 41970 Heavy Duty Pitman Arm Puller for Ford

A heavy-duty puller for the large pitman arms on Ford 250 and 350 trucks. Jaws are forged and heat-treated for strength. Position puller jaws under the pitman arm, turn center screw to remove. Opening is 1.70 inch, Inside Length is 2 5/8 inch , Width 3.08 inch and overal length is 3 9/16 inch.

  • Color: United States
  • Brand: Lisle
  • ASIN: B000ETWGKY
  • UPC: 083045419709

Heavy Duty Suction Cup Aluminum Vacuum Plate Double Handle Professional Glass/Dent Puller Lifter Gripper for Moving Glasses Window Mirror Granite

Heavy Duty Suction Cup Aluminum Vacuum Plate Double Handle Professional Glass/Dent Puller Lifter Gripper for Moving Glasses Window Mirror Granite

Suction cup handle made with Aluminum material for strong grip. 200 lbs maximum lifting capacity.Suction pad with 4-3/4 inch in diameter. Great for lifting glass, pulling dent and other applications. Ideal for handling glass, sheet metal material.

  • Brand: GekBot
  • ASIN: B01MY8SIQ7
  • UPC: 649862776175
Similar Large Puller Results
Large Puller Video Results

TIPS #305 Removing Pulleys with a Gear Puller tubalcain

Large Puller

This is a lesson on gear pullers & how to safely move pulley wheels. Watch all 700 of my machine shop videos.

  • Likes: 911
  • View count: 27498
  • Dislikes: 9
  • Comments: 138
Tags: south bend lathe,atlas lathe,logan lathe,bridgeport mill

Harbor Freight 4 Piece Puller Set Review

Large Puller

Harbor Freight 4 Piece Puller Set Review.

  • Likes: 138
  • View count: 68663
  • Dislikes: 28
  • Comments: 39
Tags: Harbor,Freight,Piece,Puller,Set,Review,DA,Dust,Collector,tool,Lathe,milling,turning,shaper,plane,...

panel dent puller system

Large Puller

miracle system dent puller

  • Likes: 2663
  • View count: 835020
  • Dislikes: 547
  • Comments: 213
Tags:

Large Prop Puller

Large Puller

  • Likes: 0
  • View count: 85
  • Dislikes: 0
  • Comments: 0
Tags: