OSOYOO 10PCS IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot

OSOYOO 10PCS IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot

The IR Infrared Obstacle Avoidance Sensor Module detection range can be through the potentiometer to adjust and have small interference, easy to assemble, easy to use. It can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on Specification The output port OUT sensor module can be directly connected to the microcontroller IO port , you can directly drive a 5V relay ; the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted Can be used for 3-5V DC power supply modules When the power is turned on, the red power indicator light Using the comparator LM393 Interface : 1. VCC: External 3.3V-5V voltage (can be directly connected to 5v MCU and 3.3v MCU) 2. GND: GND External 3. OUT: Small board digital output interfaces (0 and 1) Connection : VCC-VCC; GND-GND; OUT-IO With the screw holes of 3mm , easy fixed installation Board Size : 3.1CM * 1.5CM / 1.22 * 0.59" Package includes: 10 x Infrared Obstacle Avoidance Module

  • Brand: OSOYOO
  • ASIN: B01I57HIJ0

DAOKI 5PCS TCRT5000 Infrared Reflective Sensor Module IR Barrier Line Track Photoelectric Switch

DAOKI 5PCS TCRT5000 Infrared Reflective Sensor Module IR Barrier Line Track Photoelectric Switch

Introduce:TCRT5000 infrared sensor emits infrared emitting diode continuously when no infrared rays emitted or reflected back is reflected back but the strength is not large enough, the phototransistor has been in the off state, and the output terminal of the module is high, indicating that the diode has been in the off state; in the object to be detected within the detection range, and the intensity of the reflected infrared rays is large enough, phototransistor saturated, and the output terminal of the module is low, the indicator LED is lit.Feature:1. Using infrared reflective sensor TCRT50002. The detection distance: 1mm ~ 8mm apply focal distance of 2.5mm3. The comparator output signal clean, good waveform, driving ability, more than 15mA.4. With a multi-turn precision potentiometer adjustable sensitivity adjustment5. The working voltage of 3.3V-5V6. The output format: digital switching outputs (0 and 1)7. A fixed bolt holes for easy installation8. A small PCB board size: 3.2cm x 1.4cm9. Using a wide voltage LM393 comparatorUses:1. Meter pulse data sampling2. Fax paper shredders detection3. Obstacle detection4. Black and white line detectionPackage included:100% Brand New5x IR Barrier Line Track Sensor

  • Brand: DAOKI
  • ASIN: B00XT0PBC0
  • UPC: 695259096913

SunFounder IIC I2C Line Follower Module 8 Channel Infrared IR Detection Tracking Sensor for Arduino Smart Car Robot Robotics MCU STM8S105C4 TCRT5000

SunFounder IIC I2C Line Follower Module 8 Channel Infrared IR Detection Tracking Sensor for Arduino Smart Car Robot Robotics MCU STM8S105C4 TCRT5000

Introduction The TCRT5000 infrared photoelectric switch adopts a high transmit power infrared photodiode and a highly sensitive phototransistor. It works by applying the principle of objects' reflecting IR light -the light is emitted, then reflected, and sensed by thesynchronous circuit. Then it determines whether there exists an object or not by the light intensity. It can easily identify black and white lines. In other words, the different conduction levels of the phototransistor when it passes over black and white lines can generate different output voltages. Therefore, all we need to do is to collect data by the AD converter on the STM8S105C4 and then send the data to the master control board via I2C communication. This module is an infrared tracking sensor onethat uses a TRT5000 sensor. The blue LED of TRT5000 is the emission tube and after electrified it emits infrared light invisible to human eye. The black part of the sensor is for receiving; the resistance of the resistor inside changes with the infrared light received. Note: When the module is working, it's normal to get heated. And this module is not compatible with Raspberry Pi. More details can be found in http://wiki.sunfounder.cc/index.php?title=Line_Follower_Module Package Included 1 x Tracking Sensor Module 1 x 4...

  • Brand: SunFounder
  • ASIN: B01HB5YVUG
  • UPC: 701715368255

WINGONEER 5PCS Line Hunting Sensor Module Works with Official Arduino Boards

WINGONEER 5PCS Line Hunting Sensor Module Works with Official Arduino Boards

WINGONEER® trademark Reg.NO:4747611VCC/OUT/GND pin connectorPower Supply: 2.5-12V (cannot over 12V)Working current: 18-20mA at 5VOutput electrical level signal: Low level when detecting objects/ high level when no objects/0 or 1 decides if objects exist)Great DIY parts for intelligPackage Includes: 5 x Hunt sensor module

  • Brand: WINGONEER®
  • ASIN: B06XHD64JB
  • UPC: 723466639859

RobotDyn - 5 PCS - Line tracking Sensor, for robot and car DIY Arduino projects. Digital Out.

RobotDyn - 5 PCS - Line tracking Sensor, for robot and car DIY Arduino projects. Digital Out.

The Line Tracking Sensor for Arduino can detect the white lines in the black background and black lines in the white background. If Line Tracking Sensor detects black color, the signal line (DO) of the sensor is HIGH, at the same time the LED (blue) on the sensor lights up. If Line Tracking Sensor detect white color, the signal line (DO) goes LOW. With the potentiometer, you can adjust the sensitivity of the Line Tracking sensor and the distance to a line. The best distance between objects such as ground and the sensor is 1-3 cm. https://robotdyn.com/line-tracking-sensor.html * For get a detail information of product, instruction, schematic diagram, dimension diagram, guide and software, Pls visit to official page of product. RobotDyn(R) - registered trademark in USA. Zhuhai RobotDyn Technology Co.,Ltd - Developer and manufacture.

  • Color: 5 PCS - Line tracking sensor
  • Brand: RobotDyn
  • ASIN: B077SQ1NN4

SMAKN® TCRT5000 4CH Infrared Line Track Follower Sensor Module for Smart Car

SMAKN® TCRT5000 4CH Infrared Line Track Follower Sensor Module for Smart Car

Product Name : Track Sensor Module; Model No. : TCRT5000; Output Channel : 4 Working Voltage : 3.3V-12V; Detect Distance : 1-8mm; Focal Distance : 2.5mm PCB Size : 31 x 32mm/ 1.2" x1.26" (L*W); Sensor Board Size : 1.5 x 1.3cm/0.59" x 0.51"(L*W); Cable Length : 18cm/7" Hole Size : 3mm/ 0.12"; Material : Electric Part Net Weight : 20g; Package Content : 1 x Track Sensor Module Application: electricity meter pulse data sampling, fax paper shredder detection, obstacle detection, black and white line detection. Designed with reflected infrared sensor, indicator light. Built in a potentiometer for sensitivity control.

  • Brand: SMAKN
  • ASIN: B015VT2BPQ
  • UPC: 710185278612

RobotDyn - Line tracking Sensor, for robot and car DIY Arduino projects. Digital Out.

RobotDyn - Line tracking Sensor, for robot and car DIY Arduino projects. Digital Out.

The Line Tracking Sensor for Arduino can detect the white lines in the black background and black lines in the white background. If Line Tracking Sensor detects black color, the signal line (DO) of the sensor is HIGH, at the same time the LED (blue) on the sensor lights up. If Line Tracking Sensor detect white color, the signal line (DO) goes LOW. With the potentiometer, you can adjust the sensitivity of the Line Tracking sensor and the distance to a line. The best distance between objects such as ground and the sensor is 1-3 cm. https://robotdyn.com/line-tracking-sensor.html * For get a detail information of product, instruction, schematic diagram, dimension diagram, guide and software, Pls visit to official page of product. RobotDyn(R) - registered trademark in USA. Zhuhai RobotDyn Technology Co.,Ltd - Developer and manufacture.

  • Color: 1 PC - Line tracking sensor
  • Brand: RobotDyn
  • ASIN: B073RBJNZF

RobotDyn - IR Infrared Obstacle Avoidance Barrier Sensor for Arduino, STM32, Smart Car Robot

RobotDyn - IR Infrared Obstacle Avoidance Barrier Sensor for Arduino, STM32, Smart Car Robot

The sensor module light is adaptable to the environment, it has a pair of infrared transmitting and receiving tube, tube infrared emit a certain frequency, when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving tube, after the comparator circuit processing, green indicator will light up, at the same time signal output interface to output digital signal (a low level signal), can be through the potentiometer knob adjust the detection distance, effective distance range 2 ~ 30cm, working voltage is 3.3V to 5V. The sensor detection range can be through the potentiometer to adjust and have small interference, easy to assemble, easy to use, etc, can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on many occasions. https://robotdyn.com/infrared-barrier-sensor-obstacle-avoidance.html * For get a detail information of product, instruction, schematic diagram, dimension diagram, guide and software, Pls visit to official page of product. RobotDyn(R) - registered trademark in USA. Zhuhai RobotDyn Technology Co.,Ltd - Developer and manufacture.

  • Color: 1 PC - IR Obstacle Sensor
  • Brand: RobotDyn
  • ASIN: B073R931M7

Elegoo EL-KIT-012 UNO Project Smart Robot Car Kit V 3.0 with UNO R3, Line Tracking Module, Ultrasonic Sensor, Bluetooth Module

Elegoo EL-KIT-012 UNO Project Smart Robot Car Kit V 3.0 with UNO R3, Line Tracking Module, Ultrasonic Sensor, Bluetooth Module

Elegoo Smart Robot Cat Kit V3.0 is an educational and fun kit based on UNO R3 controller board designed for both beginners and professionals to learn electronics, programming and robotics. With our easy-to-follow tutorialassembling this robot car kit would be very intuitive and simple regardless of whether you are an engineer or a novice. Building up your own robotic project has never been so easy and fun. Just follow our tutorial and step by step you will have your own running car kit within no time. This kit enables you to have a good quality time with your children and empower them to develop and inspire their imaginations. If your kids, family or friends are attracted to the electronics and robotics world, this kit would be a great choice and perfect gift for them to start their first step on electronic journey. Component List: 1pcs UNO R3 1pcs USB cable 1pcs V5.0 extension board V3.0 1pcs L298N motor driver board V3.0 1pcs ultrasonic Sensor 1pcs ultrasonic holder 1pcs servo motor 1pcs servo motor fixed plate 1pcs Bluetooth module 1pcs line tracking module 4pcs motor 1pcs remote 1pcs charger 1pcs cell box 2pcs 18650 battery 1pcs tape 8pcs separation shims 2pcs acrylic plates 4pcs wheel 8 bags of screws and nuts for sensors and modules 4pcs aluminum blocks 10pcs copper c...

  • Color: V3.0
  • Brand: Elegoo
  • ASIN: B0746DVP1J

BOSCH SECURITY VIDEO ISC-BPR2-W12 PIR Motion Detector for Security Systems

BOSCH SECURITY VIDEO ISC-BPR2-W12 PIR Motion Detector for Security Systems

BLUE LINE GEN 2 PIR 40 FT. BY 40 FT.

  • Brand: BOSCH SECURITY VIDEO
  • ASIN: B00845WJKM
  • UPC: 800549283878
Similar Line Sensor Results
Line Sensor Video Results

KY-033 Line tracking sensor. Arduino

Line Sensor

Arduino tutorial about the Line tracking sensor from the 37 sensor kit. KY-033 Line tracking sensor. Hunt sensor. Arduino 37 sensor kit.

  • Likes: 111
  • View count: 38553
  • Dislikes: 11
  • Comments: 14
Tags: Arduino (Brand),Line track sensor,37 sensor kit,sun founder,hunt sensor,LogMaker360,KY-033 Line t...

How to Make a Line Following Robot without Microcontroller

Line Sensor

Learn-How to make a line following robot at home without using microcontroller. Project file on the free design tool:https://easyeda.com/TapendraMandal/Line_Following_Robot-a1bb40b34cd14a9186ca10b7a76df764 EasyEDA is a cloud-based EDA tool suite which supports open source and working collaborativ...

  • Likes: 7582
  • View count: 768167
  • Dislikes: 474
  • Comments: 1041
Tags: how to,make,line following robot,electronics project,DIY Electronics,homemade robot,robot,ir sens...

Arduino Project - Line Follower | Following Robot with Source Code

Line Sensor

In this tutorial, you will make line follower robot. This tutorial involves building a line follower robot with an QTR-8RC Reflectance Sensor Array. Required Hardware: Arduino Board - https://goo.gl/UyGYeF Motor Shield L293D - https://goo.gl/9Ph44b QTR-8RC Reflectance Sensor -- https://goo.gl/...

  • Likes: 1302
  • View count: 152319
  • Dislikes: 32
  • Comments: 363
Tags: line follower robot,line follower,line follower robot tutorial,line follower arduino,line followe...

Arduino Five Sensor PID Line Following Robot

Line Sensor

PLEASE READ THE VIDEO DESCRIPTION. LINK TO CODE AND TUTORIAL PROVIDED BELOW. Built the third version of a line following robot using five sensors and PID based code. This is the best line following robot so far as it a) travels the fastests and b) tracks the best even if the sensors go beyond th...

  • Likes: 484
  • View count: 106585
  • Dislikes: 36
  • Comments: 345
Tags: Arduino,Line Following Robot,PID,Arduino Robots,Arduino Five Sensor Robot