【Best Deals】OriGlam Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill

【Best Deals】OriGlam Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill

Features: For 8mm air pipe For CNC Lathe Milling Drill Machine. Cooling stone / metal / ceramic tile engraving machine. Product Size: 50 x 30 x 20mm / 2 x 1.2 x 0.8inch Hose about 1.5m Package Weight: 188g / 6.6oz Package Weight : 180 G / 6.35 Ounces Package Dimensions (L*W*H) : 190*140*30 MM / 7.48*5.51*1.18 Inches Package Include: 1 x Mist Coolant Spray System

  • Brand: OriGlam
  • ASIN: B071DXGGP4

Metal Cutting Engraving Machine Mist Cool Coolant Lubrication Spray System for Air Pipe CNC Lathe Milling Drill for Cooling Sprayer Machine

Metal Cutting Engraving Machine Mist Cool Coolant Lubrication Spray System for Air Pipe CNC Lathe Milling Drill for Cooling Sprayer Machine

Features: Size: 36.5cm(L) Hose: about 1.5m Material: Plastic+metal+brass Fitment: For 8mm air pipe For CNC Lathe Milling Drill Machine. Cooling stone / metal / ceramic tile engraving machine. NOTES: 1. Clean the liquid shall be used 2. Do not use liquid-corrosive 3. In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2(atomization and gas, associated gas pressure) 4. Use the liquid viscosity at 68cSt or less Package Includes: 1 x Mist Coolant Spray System

  • Color: Blue, orange, black
  • Brand: Yosoo
  • ASIN: B01JU683KS
  • UPC: 764880467758

Mist Coolant Lubrication Spray System For 8mm Air Pipe CNC Lathe Milling Drill

Mist Coolant Lubrication Spray System For 8mm Air Pipe CNC Lathe Milling Drill

Description: Engraving machine spray cooling,Special design,direction of rotation,easy to operate. Standard fixing device,fine spray port, long life. Specification: Material:plastic&metal&brass Size:36cm(L),hose about 1M. Fit for 8mm air pipe Cooling stone/metal/ceramic tile engraving machine. For CNC Lathe Milling Drill Machine. Features: 1) a lot of water problem solving tools, easier to clean up. 2) processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled. 3) gas processing chips are blown away, working safer. 4) the nebulizer gas and coolant is adjustable, easy to use on different processing conditions. 5) Even the super-hard alloy precision machining the workpiece can achieve a smooth surface 6) not only increases the machining cutting speed, save time and reduce processing costs and tool wear. NOTES: 1. Clean the liquid shall be used. 2. Do not use liquid-corrosive. 3. In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure). 4. Use the liquid viscosity at 68cSt or less. Package include: 1x Mist Coolant System

  • Brand: Bleiou
  • ASIN: B01C74DL98
  • UPC: 602258388413

【Best Deals】OriGlam Mist Coolant Mist Lubrication, Spray System Unit Used for CNC Lathe Milling Drill Machine

【Best Deals】OriGlam Mist Coolant Mist Lubrication, Spray System Unit Used for CNC Lathe Milling Drill Machine

Features: Mist coolant spray system. Air flow and spray mist volume adjustable design,easier to use. Save 60-80% lubricants compared with the oldest lubrication tube. Set multi function all in one,cooling,lubrication and blowing the metal chips. Installed on CNC lathe,milling machine for improving machine ability, cutting speed, and extending tool service life, Saving working time and production cost. Weight: 178g / 6.28g Material: Plastic + metal Length: 375mm / 14.76in Air Hose Length: 125cm / 49.21in Air Pipe Interface Size: 8mm / 0.31in Package Weight : 170 G / 6.00 Ounces Package Dimensions (L*W*H) : 180*140*50 MM / 7.09*5.51*1.97 Inches Package Include: 1 x Mist Coolant Spray System

  • Brand: OriGlam
  • ASIN: B06XB8BGDL

KOOL MIST Single Mist Unit - Model : 100N-205

KOOL MIST Single Mist Unit - Model : 100N-205

KOOL MIST Single Mist Unit - Model : 100N-205 No. of Lines 1 Length of Line 4'

  • Brand: KOOL MIST
  • ASIN: B005P0BFE0

Actopus Mist Coolant Mist Lubrication System Unit For CNC Lathe Milling Drill Machine

Actopus Mist Coolant Mist Lubrication System Unit For CNC Lathe Milling Drill Machine

Material:plastic+metal Size:whole length:35cm Cardan Joint diameter:5mm Advantage:Cutting,drilling,tapping,cooling and lubricate. Can save the cooling liquid in the range of 80%,high quality in cooling effect. Notice: Must use the clean liquid. Do not use the corrosivity liquid. The out put air pressure range should be at 5-7KGF/CM2 The liquid viscosity should be below 68cST. Package Included: 1x Mist Coolant Spray System

  • Brand: Actopus
  • ASIN: B01M063NBS
  • UPC: 611801776966

Noga MC1700 MINI-COOL KIT

Noga MC1700 MINI-COOL KIT

Stainless steel armored siphon hose can be dropped into any container on floor or table. Protected from hot chips. Nozzle connected via Loc-Line® flexible hose can be easily pointed to desired spot.

  • Brand: Noga
  • ASIN: B005P07TSQ
  • UPC: 094724664051

CRC SL2512 Soluble Oil, 32 Fl Oz

CRC SL2512 Soluble Oil, 32 Fl Oz

Use for improved wetting, cleaning and lubricating during metal cutting and grinding applications. Quantity produced will is dependent upon the lubricity needed for the tooling operation - whether the operation calls for a concentrated or diluted application.

  • Brand: CRC
  • ASIN: B000M8O010
  • UPC: 072213251203

Kool Mist #77 Concentrated Coolant - Container Size: 1 Gallon Series: #77

Kool Mist #77 Concentrated Coolant - Container Size: 1 Gallon Series: #77

Kool Mist #77 Concentrated Coolant - Container Size: 1 Gallon Series: #77

  • Brand: KOOL MIST
  • ASIN: B00H9P12HE

Yosoo Mist Coolant Lubrication Spray System For 8mm Air Pipe CNC Lathe Mill Drill Cooling Machine

Yosoo Mist Coolant Lubrication Spray System For 8mm Air Pipe CNC Lathe Mill Drill Cooling Machine

Description: Engraving machine spray cooling,Special design,direction of rotation,easy to operate.Standard fixing device,fine spray port, long life. Specification: Material:plastic&metal&brass Size:36cm(L),hose about 1M. Fit for 8mm air pipe Cooling stone/metal/ceramic tile engraving machine. For CNC Lathe Milling Drill Machine. Features: 1) a lot of water problem solving tools, easier to clean up. 2) processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled. 3) gas processing chips are blown away, working safer. 4) the nebulizer gas and coolant is adjustable, easy to use on different processing conditions. 5) Even the super-hard alloy precision machining the workpiece can achieve a smooth surface 6) not only increases the machining cutting speed, save time and reduce processing costs and tool wear. NOTES: 1. Clean the liquid shall be used. 2. Do not use liquid-corrosive. 3. In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure). 4. Use the liquid viscosity at 68cSt or less. Package include: 1x Mist Coolant System

  • Brand: Yosoo
  • ASIN: B0192XS41W
  • UPC: 600346218024
Similar Mist Coolant System Results
Mist Coolant System Video Results

Simple Cheap Spray Mist installation

Mist Coolant System

Simple and cheap spray mist lubrication system.

  • Likes: 38
  • View count: 13200
  • Dislikes: 5
  • Comments: 11
Tags: Spray mist cooling lathe mill,Cheap spray mist coolant system,Modified ebay spray mister for lath...

Chinese Misting System Review

Mist Coolant System

I Bought this little misting unit of Aliexpress, So thought I would give it a test before Hooking it up to the mill

  • Likes: 85
  • View count: 21776
  • Dislikes: 8
  • Comments: 21
Tags: router,spindle,plasma,plans,machine plans,cnc machine plans,cnc router plans,cnc plasma plans,mac...

Portable Simple Effective Cheap Spray Mist Coolant System

Mist Coolant System

Portable pray mist coolant system using a magnetic base as a mount and an easily available very cheap ebay misting nozzle.

  • Likes: 21
  • View count: 3287
  • Dislikes: 2
  • Comments: 4
Tags: Portable spray mist coolant assembly DIY,Cheap spray mist coolant system,Lathe mist coolant syste...

DIY "FogBuster" Under $50

Mist Coolant System

I wanted to try mist coolant but didn't want to break the bank. This is what I came up with. Support these projects on Patreon! https://www.patreon.com/chrisdeprisco Special thanks to Tex©, DOMINIK LIZAK and James Waples for their support!

  • Likes: 250
  • View count: 24779
  • Dislikes: 26
  • Comments: 48
Tags: Mist Coolant,CNC Coolant,Milling,DIY