0.9deg Nema 17 Stepper Motor Bipolar 0.9A 36Ncm/50oz.in 42x42x39mm 4-wires DIY

0.9deg Nema 17 Stepper Motor Bipolar 0.9A 36Ncm/50oz.in 42x42x39mm 4-wires DIY

This high precision bipolar Nema 17 stepper motor with 0.9° step angle (400 steps/revolution). Each phase draws current 0.9A, allowing for a holding torque of 36Ncm(50oz.in). Electrical Specification * Manufacturer Part Number: 17HM15-0904S * Motor Type: Bipolar Stepper * Step Angle: 0.9° * Holding Torque: 36Ncm(50oz.in) * Rated Current/phase: 0.9A * Phase Resistance: 6.0ohms * Recommended Voltage: 12-24V * Inductance : 12.0mH±20%(1KHz) Physical Specification * Frame Size: 42 x 42mm * Body Length: 40mm * Shaft Diameter: Φ5mm * Shaft Length: 22mm * D-cut Length: 15mm * Number of Leads: 4 * Lead Length: 300mm * Weight : 280g Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

  • Brand: STEPPERONLINE
  • ASIN: B00W98OYE4
  • UPC: 701056561445

Nema 17 Stepper Motor, 5PCS Bipolar 1.7A 40Ncm(56.2oz.in) 40mm Body 4-lead W/ 40mm Cable and Connector for 3D Printer/CNC

Nema 17 Stepper Motor, 5PCS Bipolar 1.7A 40Ncm(56.2oz.in) 40mm Body 4-lead W/ 40mm Cable and Connector for 3D Printer/CNC

The cable length is 400mm euqal to 15.7 inches. This is the most popular Nema 17 model. It with 1.8 deg. step angle (200 steps/revolution). Each phase draws current 1.7A at 12V, allowing for a holding torque of 40Ncm(56.2oz.in). Electrical Specification: * Manufacturer Part Number: 17HS4401 * Motor Type: Bipolar Stepper * Step Angle: 1.8 deg. * Holding Torque: 40Ncm(56.2oz.in) * Rated Current/phase: 1.7A * Phase Resistance: 1.5Ohm±10% * Insulation Resistance: 100MΩ¸ Min, 500VDC * Insulation Strength: 500VAC for one minute Physical Specification: * Frame Size: 42 x 42mm * Body Length: 40mm * Shaft Diameter: 5mm * Number of Leads: 4 * Lead Length: 400mm * Weight: 280g * Temperature rise: 80deg Max(rated current, 2 phase on) Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

  • Brand: TopDirect
  • ASIN: B075JG2MVS
  • UPC: 661273115817

0.9deg Nema 17 Stepper Motor Bipolar 1.2A 11Ncm/15.6oz.in 42x42x20mm 4-wires

0.9deg Nema 17 Stepper Motor Bipolar 1.2A 11Ncm/15.6oz.in 42x42x20mm 4-wires

This is high precision bipolar Nema 17 stepper motor with 0.9° step angle (400 steps/revolution). Each phase draws current 1.2A, allowing for a holding torque of 11Ncm(15.6oz.in). Electrical Specification * Manufacturer Part Number: 17HM08-1204S * Motor Type: Bipolar Stepper * Step Angle: 0.9° * Holding Torque: 11Ncm(15.6oz.in) * Rated Current/phase: 1.2A * Phase Resistance: 3.0ohms * Recommended Voltage: 12-24V * Inductance : 2.2mH±20%(1KHz) Physical Specification * Frame Size: 42 x 42mm * Body Length: 21mm * Shaft Diameter: Φ5mm * Shaft Length: 17mm * Number of Leads: 4 * Lead Length: 300mm * Weight : 150g Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

  • Brand: STEPPERONLINE
  • ASIN: B00W96BBF6
  • UPC: 701056568840

Nema 17 Bipolar Stepper 0.9deg(400 steps/rev) 1.68A 44Ncm(62.3oz.in) Motor

Nema 17 Bipolar Stepper 0.9deg(400 steps/rev) 1.68A 44Ncm(62.3oz.in) Motor

This is high precision bipolar Nema 17 stepper motor with 0.9 deg. step angle (400 steps/revolution). Each phase draws current 1.68A, allowing for a holding torque of 44Ncm(62.3oz.in). Electrical Specification: * Manufacturer Part Number: 17HM19-1684S * Motor Type: Bipolar Stepper * Step Angle: 0.9 deg. * Holding Torque: 44Ncm(62.3oz.in) * Rated Current/phase: 1.68A * Phase Resistance: 1.65ohms * Inductance: 4.1mH+/-20%(1KHz) Physical Specification: * Frame Size: 42 x 42mm * Body Length: 47mm * Shaft Diameter: 5mm * Shaft Length: 20mm * D-cut Length: 15mm * Number of Leads: 4 * Lead Length: 500mm * Weight: 370g Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

  • Brand: OSM Technology Co.,Ltd.
  • ASIN: B00PNEQMLY
  • UPC: 701056306435

Stepping Motor Nema 17 Stepping Motor, 5pcs Stepper Motor Nema 17 Bipolar 3.5V 1A 18.4oz.in(13Ncm) 4 Lead for 3D Printer/CNC

Stepping Motor Nema 17 Stepping Motor, 5pcs Stepper Motor Nema 17 Bipolar 3.5V 1A 18.4oz.in(13Ncm) 4 Lead for 3D Printer/CNC

Electrical Specification: * Manufacturer Part Number: 17HS08-1004S * Motor Type: Bipolar Stepper. * Step Angle: 1.8 deg. * Holding Torque: 13Ncm(18.4oz.in) . * Rated Current/phase: 1.0A. * Phase Resistance: 3.5ohms. * Inductance: 4.5mH+/-20%(1KHz). Physical Specification: * Frame Size: 42 x 42mm * Body Length: 20mm * Shaft Diameter: 5mm * Shaft Length: 20mm * D-cut Length: 16.5mm * Number of Leads: 4 * Lead Length: 400mm * Weight: 140g Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor. Package include: 5x nema 17 stepping motor

  • Brand: MYSWEETY
  • ASIN: B077HSYXZD
  • UPC: 661273114544

0.9deg Round Nema 14 Stepper Motor Bipolar 0.65A 12Ncm/17oz.in Φ36x19.5mm 4-wires

0.9deg Round Nema 14 Stepper Motor Bipolar 0.65A 12Ncm/17oz.in Φ36x19.5mm 4-wires

This round size hybrid bipolar Nema 14 stepper motor with 0.9° step angle (400 steps/revolution). Each phase draws 650 mA, allowing for a holding torque of 12Ncm(17oz.in). Good choice for camera and monitor. Electrical Specification * Manufacturer Part Number: 14HR08-0654S * Motor Type: Bipolar Stepper * Step Angle: 0.9° * Holding Torque: 12Ncm(17oz.in) * Rated Current/phase: 0.65A * Phase Resistance: 7ohms * Recommended Voltage: 12-24V * Inductance : 5.0mH±20%(1KHz) Physical Specification * Frame Size: Φ36mm * Body Length: 19.5mm * Shaft Diameter: Φ5mm * Shaft Length: 15.5mm * D-cut Length : 10mm * Number of Leads: 4 * Lead Length: 300mm * Weight : 100g Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

  • Brand: STEPPERONLINE
  • ASIN: B00W91K3T6
  • UPC: 701056577620

Nema 17 Bipolar Stepper 12V 0.4A 56.7oz.in/40Ncm Hybrid Stepper Motor 3D Printer

Nema 17 Bipolar Stepper 12V 0.4A 56.7oz.in/40Ncm Hybrid Stepper Motor 3D Printer

This is bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws current 400mA at 12V, allowing for a holding torque of 40Ncm(56.6oz.in). Electrical Specification: * Manufacturer Part Number: 17HS15-0404S * Motor Type: Bipolar Stepper * Step Angle: 1.8 deg. * Holding Torque: 40Ncm(56.6oz.in) * Rated Current/phase: 0.4A * Phase Resistance: 30.0ohms * Inductance: 58mH+/-20%(1KHz) Physical Specification: * Frame Size: 42 x 42mm * Body Length: 39mm * Shaft Diameter: 5mm * Shaft Length: 24mm * D-cut Length: 15mm * Number of Leads: 4 * Lead Length: 500mm * Weight: 290g Connection: Black(A+), Red(A-), Green(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

  • Brand: STEPPERONLINE
  • ASIN: B00PNEQCLO
  • UPC: 701056330348

Nema 17 Unipolar Stepper 1.8deg 12v 0.4A 32Ncm/45.3oz.in 42x42x48mm 6-wires DIY

Nema 17 Unipolar Stepper 1.8deg 12v 0.4A 32Ncm/45.3oz.in 42x42x48mm 6-wires DIY

This is bipolar Nema 17 stepper motor with 1.8° step angle (200 steps/revolution). Each phase draws 400mA at 12V, allowing for a holding torque of 32Ncm(45.3oz.in). Electrical Specification * Manufacturer Part Number: 17HS19-0406S * Motor Type: Unipolar Stepper * Step Angle: 1.8° * Holding Torque: 32Ncm(36.24oz.in) * Rated Current/phase: 0.4A * Phase Resistance: 30.0ohms * Recommended Voltage: 12-24V * Inductance : 25mH±20%(1KHz) Physical Specification * Frame Size: 42 x 42mm * Body Length: 48mm * Shaft Diameter: Φ5mm * Shaft Length: 24mm * D-cut Length: 15mm * Number of Leads: 6 * Lead Length: 500mm * Weight : 380g Connection: Black(A+), Yellow(O), Green(A-), Red(B+), White(O), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

  • Brand: STEPPERONLINE
  • ASIN: B00W99F03M
  • UPC: 701056537488

0.9deg Nema 17 Stepper Motor Bipolar 2A 46Ncm/65oz.in 42x42x48mm 4-wires DIY CNC

0.9deg Nema 17 Stepper Motor Bipolar 2A 46Ncm/65oz.in 42x42x48mm 4-wires DIY CNC

This high torque and precision bipolar Nema 17 stepper motor with 0.9° step angle (400 steps/revolution). Each phase draws current 2A, allowing for a holding torque of 46Ncm(65.1oz.in). Electrical Specification * Manufacturer Part Number: 17HM19-2004S * Motor Type: Bipolar Stepper * Step Angle: 0.9° * Holding Torque: 46Ncm(65.1oz.in) * Rated Current/phase: 2.0A * Phase Resistance: 1.4ohms * Recommended Voltage: 12-24V * Inductance : 3.0mH±20%(1KHz) Physical Specification * Frame Size: 42 x 42mm * Body Length: 48mm * Shaft Diameter: Φ5mm * Shaft Length: 24mm * D-cut Length: 15mm * Number of Leads: 4 * Lead Length: 500mm * Weight : 370g Connection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

  • Brand: STEPPERONLINE
  • ASIN: B00W9A2L3S
  • UPC: 701056539857

TEN-HIGH 400mm 15.75inch Travel Length , Ball screw linear guide slide module RM1605 SFU1605 with 17 Nema 42 stepper motor, SG series Ball screws Linear module sliding table Motion system.

TEN-HIGH 400mm 15.75inch Travel Length , Ball screw linear guide slide module RM1605 SFU1605 with 17 Nema 42 stepper motor, SG series Ball screws Linear module sliding table Motion system.

Notice: The actual effective length of the linear guide module is 15 mm longer than the effective travel. 15mm extra length design is to give extra space to protect the linear slide module. If you do not need the extra length, please contact us to confirm the accurate effective length that you need. The motor must be connected to the Driver and the Controller and the Power supply, to make sure the stepper motor running. Brand:TEN-HIGH Effective Travel: 400mm Type: linear system module Ballscrew type: SFU1605-C7 Guide: 16mm BallScrew Pitch (lead): 5mm Highest Speed: 50mm/s Stepper motor: include Stepper motor: Nema 17, 24v 1.5A Package including: 1 set 400mm travel length SFU1605 Linear Guide Rail with 17Nema 42 Stepper Motor Ball Screws Linear module system.

  • Color: 400mm
  • Brand: Ten-high
  • ASIN: B071DGFZPT
Similar Nema 17 Stepper Motor 400 Results
Nema 17 Stepper Motor 400 Video Results

NEMA 17 & Easy Driver Arduino Demo

Nema 17 Stepper Motor 400

Decided to upload a quick video to show how smooth a 400 steps/rev stepper motor is with 8 microsteps per step. (means 3200 steps per revolution) Parts: Arduino Uno Sparkfun Easy Driver v4.4 Sparkfun Stepper Motor (400s/r)

  • Likes: 10
  • View count: 13623
  • Dislikes: 1
  • Comments: 3
Tags: arduino,uno,stepper,motor,controller,easydriver,easy,driver,steps,per,revolution,microstep,micros...

Selecting a power supply for NEMA 17 motors

Nema 17 Stepper Motor 400

Real world example. I have since learned how to use my multimeter 0:00 Introduction 2:40 Holding (idle) maximum current draw @ 24V 3:56 8 RPM maximum current draw @ 24V 4:58 400 RPM maximum current draw @ 24V 6:20 800 RPM ...

  • Likes: 32
  • View count: 7075
  • Dislikes: 8
  • Comments: 21
Tags: nema 17,psu,power,consumption

3D Printer stepper motor mod

Nema 17 Stepper Motor 400

How to replace a leadscrew inside a stepper motor. Stepper Motor in this video: http://www.banggood.com/JKM-42-Linear-Stepper-Motor-Trapezoidal-Screw-320MM-0_32NM-p-933434.html?p=9X051049165582016063 Replacement Leadscrews available here: 300mm - http://www.banggood.com/3D-Printer-300mm-Lead-Sc...

  • Likes: 1186
  • View count: 153664
  • Dislikes: 122
  • Comments: 255
Tags: stepper motor,lead screw,leadscrew,acme,trapezoid,3d printer,cnc,cnc machine,diy

High speed stepper motor Nema 23 + Arduino

Nema 17 Stepper Motor 400

Acceleration of Stepper motor Nema 23 + Arduino (high speed) For the code see below in the comments. The program accelerates the stepper motor.

  • Likes: 136
  • View count: 94624
  • Dislikes: 44
  • Comments: 86
Tags: Motor,arduino,high speed,stepper