Pexflow PFR-R121000 Oxygen Barrier PEX Tubing for Hydronic Radiant Floor Heating Systems, 1/2 Inch x 1000 Feet, Red

Pexflow PFR-R121000 Oxygen Barrier PEX Tubing for Hydronic Radiant Floor Heating Systems, 1/2 Inch x 1000 Feet, Red

Pexflow Oxygen Barrier PEX Tubing (EVOH) is used for residential and commercial radiant heating system applications. It keeps oxygen along with other elements from infiltrating and corrupting the key mechanical components in heating systems. Strong and flexible cross-linked polyethylene tubing with exceptional temperature and pressure ratings that exceed expectations for plumbing projects in hydronic radiant heating applications. Commonly used in medium to large size radiant floor heating projects as well as for baseboard and radiator heating systems. The hydronic tubing system was designed to be the most efficient snow melting system for outdoor use on concrete ground. This also provides additional benefits of freeze protection by expanding and contracting its tube that is resistant to breakage. The tubing can withstand temperature aging with longer life expectancy and exceptional maintenance free performance. For optimal leak free water flow connections, the tubing system works with cinch clamps seal accessories ensuring continuous performance. Made using a "Silane" or "Moisture Cure" method. PEX Tubing is marked every 5 Feet and conforms with ASTM F876, ASTM F877, CSA B137.5, NSF 14, NSF-RFH & ASTM standards. Note: Can be used for cold water system, but not potable water.

  • Color: Red
  • Brand: PEXFLOW
  • ASIN: B00NPYAJNQ
  • UPC: 804595980118

1/2" Inch x 300 ft Pex Tubing Oxygen O2 Barrier EVOH, Pex-B Red 300 ft for Radiant Floor Heat (From VIVO)

1/2" Inch x 300 ft Pex Tubing Oxygen O2 Barrier EVOH, Pex-B Red 300 ft for Radiant Floor Heat (From VIVO)

1/2" PEX Tubing with Oxygen Barrier (EVOH) is used for residential and light commercial radiant heating applications. With the same properties as PEX non barrier pipes, EVOH PEX barrier pipe keeps oxygen and other elements from infiltrating and corrupting the key mechanical components in heating systems. Tubing is marked every 5ft with length, ASTM standards, approvals, certifications, pressure ratings and other technical information. Warranty: Industry standard, 25-year manufacture's warranty. Applications: 1/2" PEX tubing w/ Oxygen Barrier is common for the following radiant floor heating applications -Structural concrete slabs (rebar or wire mesh reinforced slabs) -Non-structural slabs (thermal mass, gypsum slabs) -Staple-up (between joists) radiant floor heating with and without heat transfer plates -"Sandwich" types radiant heating (between subfloor and finished floor) -Snow & ice melting systems -Baseboard & radiator heating systems STANDARDS, CERTIFICATIONS & APPROVALS: -ASTM F876: Standard Specification for Crosslinked Polyethylene (PEX) Tubing -ASTM F877: Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems -CSA B137.5: Cross Linked Polyethylene (PEX) Tubing Systems for Pressure Applications -All Oxy...

  • Color: Red
  • Brand: VIVO
  • ASIN: B00HFFAJWC
  • UPC: 617401140756

4 Ft - 1/2" PEX Aluminum Heat Transfer Plates, (100/box) for Radiant Heating (HP-4) by PEX GUY

4 Ft - 1/2" PEX Aluminum Heat Transfer Plates, (100/box) for Radiant Heating (HP-4) by PEX GUY

This is a box of Genuine PEX GUY 4ft long Aluminum Heat Transfer Plates for 1/2" PEX tubing. Details: - Manufactured from stamped aluminum.- Nominal thickness of these plates is 0.016", with the length of 48" and the width of 4.38".- Compatible with all types and brands of 1/2" PEX tubing (5/8" OD). - Can be used for subfloor or sandwich type radiant heating installations to improve heat transfer properties of the system and lower the water supply temperature, thus reducing the heating bills. - Recommended spacing for parallel tubing runs is 8" OC. *** CALCULATIONS (assuming 8 inch spacing): Number of plates = sq area x 1.30 / length of plates *** - Example: 1000 sq ft area multiply by 1.30 = 1300ft of plates (650 plates of the 2ft version or 325 plates of the 4 ft version). Note: Do not overlap the ends of the plates, make sure you have at least 2-3 inches spacing from end to end.

  • Brand: PEX GUY
  • ASIN: B009KT7PO6

New 6 Loop 1/2" Pex Manifold Stainless Steel Radiant Floor Heating Set / Six Branch Kit (PEX-M12-6)

New 6 Loop 1/2" Pex Manifold Stainless Steel Radiant Floor Heating Set / Six Branch Kit (PEX-M12-6)

PEX-M12-6 is a stainless steel 6 Loop Radiant Manifold kit from VIVO. Features include body flow meters with adjustable flow rates, isolation ball valve with 1" NPT thread made of high-quality brass forging, stem thermometers for both isolation ball valves, automatic air purge valves, ½" compression connectors, and mounting brackets. Each port is spaced 2" apart and has its own turn off valve. The entire manifold measures approximately 21" x 15" and has an approximate weight of 15lbs. PEX-M12-6 is commonly used for radiant floor heat systems and features easy installation. Complete kit as shown in the pictures provided (1 supply manifold, 1 return manifold, 6 flow meters, 12 adapters (1/2"), 2 isolation ball valves with 1" NTP and temperature gauges, 2 air vents, 2 drain valves, 1 heavy duty mounting bracket. Not suitable for potable water applications.

  • Brand: Rifeng/VIVO
  • ASIN: B00V8S25KG
  • UPC: 641020644876

Happybuy Oxygen O2 Barrier PEX Tubing - 1/2 Inch x 1000 Feet Tube Coil - Potable Water EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Hot Cold Water Plumbing PEX Tubing (1000Ft)

Happybuy Oxygen O2 Barrier PEX Tubing - 1/2 Inch x 1000 Feet Tube Coil - Potable Water EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Hot Cold Water Plumbing PEX Tubing (1000Ft)

Oxygen O2 Barrier PEX Tubing - 1/2 Inch x 1000 Feet Tube Coil - Potable Water EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Hot Cold Water Plumbing PEX Tubing ADVANTAGES of the Oxygen O2 Barrier PEX Tubing: Superior temperature and pressure ratings - Pex Tubing is a strong and flexible cross-linked polyethylene tubing with superior temperature and pressure ratings that is useful for plumbing project in commercial and residential hydronic radiant heating applications Prevents corrosion - PEX tubing was manufactured with an oxygen barrier add on which limits oxygen permeation and prevents corrosion of iron compound of metal parts in heating systems Durable freeze protection - The tubing composite also provides additional benefits of durable freeze protection by expanding and contracting to function as snow melting application Resistant to temperature aging - PEX tube is resistant to temperature aging and will provide you with longer life expectancy and maintenance free for exceptional performance TECHNICAL DATA: PEX Tubing Size: 1/2" OD: 0.625" ID: 0.475" Length: 1000 Feets PEX Type: PEX-B Pressure Ratings: 80psi @ 200F, 100psi @ 180F, 160psi @ 73F Minimum Bending Radius: 5" (Industry Standard for 1/2" PEX) SDR-9 Dimensional Standards Marked every 5ft with techni...

  • Color: Red
  • Brand: Happybuy
  • ASIN: B072PRSM7T
  • UPC: 601285880648

2ft long x 4" wide, 1/2" PEX Aluminum Heat Transfer Plates (200/box), U-Shaped, Imported

2ft long x 4" wide, 1/2" PEX Aluminum Heat Transfer Plates (200/box), U-Shaped, Imported

U-shaped, 24" long x 4" wide heat transfer plates manufactured from 0.016" thick stamped aluminum. For use with 1/2" PEX tubing (all types - A, B, C). These plates can be used for underfloor heating (between the joists, stapled to the bottom of the subfloor) or "sandwich" (between subfloor and finished floor) type radiant heating applications. When installed between the joists, recommended spacing for tubing is 8" OC (On Center). Box of 200 plates (400 linear ft total). Technical Specifications: Material: Aluminum; Length: 2ft (24"); Width: 4"; Thickness: 0.016".

  • Brand: Heat Transfer Plates
  • ASIN: B06VV9XLWY
  • UPC: 637459212816

300' 3/4" PEX AL PEX tubing for heating, plumbing

300' 3/4" PEX AL PEX tubing for heating, plumbing

PEX AL PEX Tubing diameters and lengths:½' 300', 1000'0.75' 300', 500', 1000'1' 100', 250', 600'1 ¼' 300' PRODUCT DESCRIPTION:PEX-AL-PEX Tubing for use in radiant heating applications. Meets/exceeds ASTM F1281, CSA B137.10 standards. Also certified for use in domestic water applications. UPC listed by IAPMO. Pressure rated at: 80 psi at 200 F, 160 psi at 140 F, 200 psi at 73 F. Packing: Box.WARRANTY: Lifetime APPLICATIONS: PEX-AL-PEX Tubing is commonly used for radiant heating applications projects such as concrete slabs (wire mesh or rebar reinforced), thin slabs (non-reinforced), below the sub-floor heating (staple-up), sandwich type installations (between sub-floor and finished floor) and many others. Typical loop length for 1/2 PEX-AL-PEX varies from 250' to 350', depending of the application, supply temperatures, flow rates, etc. 300' is considered standard for typical concrete slab install.COMPATIBILITY:PEX-AL-PEX tubing can be installed using compression style PEX Fittings of Press type system (fittings, sleeves and tools) 3/4 PEX AL PEX tubing which is commonly used for installing outdoor wood furnaces, solar systems, in floor applications and plumbing uses.PEX AL PEX is a tubing which has a layer of aluminum in it to prevent oxygen penetration. Plumbers like it because...

  • Color: Orange
  • Brand: Badgerpipe
  • ASIN: B01BFJ5RNE
  • UPC: 815817020147

1/2" inch x 1000ft Pex Tubing Oxygen O2 Barrier EVOH, Pex-B Red 1,000 ft for Radiant Floor Heat (From VIVO)

1/2" inch x 1000ft Pex Tubing Oxygen O2 Barrier EVOH, Pex-B Red 1,000 ft for Radiant Floor Heat (From VIVO)

1/2" PEX Tubing with Oxygen Barrier (EVOH) is used for residential and light commercial radiant heating applications. With the same properties as PEX non barrier pipes, EVOH PEX barrier pipe keeps oxygen and other elements from infiltrating and corrupting the key mechanical components in heating systems. Tubing is marked every 5ft with length, ASTM standards, approvals, certifications, pressure ratings and other technical information. Warranty: Industry standard, 25-year manufacture's warranty. Applications: 1/2" PEX tubing w/ Oxygen Barrier is common for the following radiant floor heating applications -Structural concrete slabs (rebar or wire mesh reinforced slabs) -Non-structural slabs (thermal mass, gypsum slabs) -Staple-up (between joists) radiant floor heating with and without heat transfer plates -"Sandwich" types radiant heating (between subfloor and finished floor) -Snow & ice melting systems -Baseboard & radiator heating systems STANDARDS, CERTIFICATIONS & APPROVALS: -ASTM F876: Standard Specification for Crosslinked Polyethylene (PEX) Tubing -ASTM F877: Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems -CSA B137.5: Cross Linked Polyethylene (PEX) Tubing Systems for Pressure Applications -All Oxy...

  • Color: Red
  • Brand: Rifeng
  • ASIN: B00HFFCL9Q
  • UPC: 617401140770

CMI - ½” Pex Manifold Radiant Floor Heating Set Stainless Steel - Loop/ Branch - Adjustable Flow Valves - Automatic Air Vent (2-loop)

CMI - ½” Pex Manifold Radiant Floor Heating Set Stainless Steel - Loop/ Branch - Adjustable Flow Valves - Automatic Air Vent (2-loop)

The Heart of your Heating SystemRadiant Heat manifolds play a large part in heating systems. It allows for even distribution of supply water from the heat source to distribution lines that circulate hot water through the entire system. They can be used in a variety of applications ranging from radiant, hydronic, or snow-melt applications. The systems are made of adapters, end caps, and fittings that can be customized in a manifold depending on the application. A well-made manifold should distribute water efficiently and economically when the PEX tubing is sized properly. PEX manifolds reduce the need for soldering copper pipes, which prevents flames and chemicals getting into water lines causing problems. A Radiant PEX Manifold set can cover a large area depending on the branch. A 2-branch Radiant PEX Manifold Set can cover a maximum of 800 square feet to an 8-branch that can cover 1800-2200 square foot of floor.Our Radiant Floor Heating Manifold Set comes complete with:(1)- Manifold balance section Body with flow meters(1)- Manifold Isolation section Body with valves(2)- Mounting brackets (2)- Manifold Isolation ball valve with 1" (inch) NPT Pipe Connection(2)- Stem thermometer on each Manifold Isolation ball valve(2)- Manifold end capsAlso includes 1/2" Compression connectors-(...

  • Brand: CMI
  • ASIN: B075LYTF9H
  • UPC: 847877050215

1/2" PEX AL PEX Tubing For Radiant Floor Heating Or Potable Water PEX GUY (1,000 Ft)

1/2" PEX AL PEX Tubing For Radiant Floor Heating Or Potable Water PEX GUY (1,000 Ft)

This is a roll of Genuine PEX GUY 1/2" PEX AL PEX Radiant Piping-PEX AL PEX Tubing as the name implies has an Aluminum layer sandwiched between two PEX layers, hence the name PEX AL PEX. The aluminum layer acts as the Oxygen Barrier so it is perfect for closed loop radiant heating systems. Another advantage of PEX-AL-PEX is the ability to bend it to a turn and it stays ( very little recoil due to the aluminum layer ) so it prevents the spaghetti like installation. -Applications: -Radiant Heating applications -Potable Water applications Radiant Heating PEX tubing can be used in most radiant heating installation method such as: -Thick/Thin concrete slabs, -Under sub-floor (between joist) with or without heat plates -Engineered Floor -Staple up or Staple down -Baseboard and Radiator -Snow Melting Systems -Solar Heating Applications CERTIFICATION and RATING: -SDR 9 Standard -ASTM F876/877 -NSF certified for Radiant Heating (North America Certification) -pw-G (meets low lead requirements for North America) -cl-TD (chlorine resistance for Traditional Domestic Water applications) -CSA 137.5 (Canadian Certification) -Warnock Hersey Canada (Canadian Certification) -IAMPO -UPC -TUV (German Certification) -DIN 4726 (European Standard) -Pressure ratings: 80psi @ 200F, 160psi @ 140F, 200psi @...

  • Color: Orange
  • Brand: PEX GUY
  • ASIN: B01FGNYG6Y
Similar Pex Radiant Floor Heating Results
Pex Radiant Floor Heating Video Results

PEX Tubing Layout and Install for In-Slab Radiant Heat

Pex Radiant Floor Heating

In this video we use our story pole to lay out our PEX tubing pattern on insulating foam for an in-slab installation. Then, using our RHT Foam Stapler, we attach the PEX to the foam with the help of an uncoiler, following our tubing pattern. The end result is a garage floor ready for a topping p...

  • Likes: 116
  • View count: 187619
  • Dislikes: 23
  • Comments: 14
Tags: Radiant Heating,PEX Tubing,Cross-linked Polyethylene,PEX install,PEX Garage,Foam Staple Down,RHT ...

Hydronic Radiant Floor Heating System Comparisons

Pex Radiant Floor Heating

00962 Radiant Floor Heating System Comparison - I have installed oxygen barrier pex tubing in three different configurations under the floors in my house so far this year, and here's a video that compares my first two installation methods. Check out my youtube channel for similar versions of thi...

  • Likes: 62
  • View count: 55520
  • Dislikes: 55
  • Comments: 34
Tags: Hydronics,Radiant Heating,HVAC (Industry),Heating System,Repair,Review

How to Install DIY Radiant Floor Heating

Pex Radiant Floor Heating

Use a specialized foam panel called Bekotec to lock the PEX tubing in place, cover it with a sand-and-cement mix, and tile away. (See below for a shopping list, tools, and steps.) Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?a...

  • Likes: 1474
  • View count: 290872
  • Dislikes: 77
  • Comments: 49
Tags: radiant heating,heated floor,PEX tubing,bekotec,foam panel,flooring,floor,radiant floor heating,d...

Better way on how to run radiant heat pex under floor warming with transfer plates

Pex Radiant Floor Heating

The better way to run Pex for radiant heat under floor using transfer plates

  • Likes: 313
  • View count: 71545
  • Dislikes: 28
  • Comments: 41
Tags: