Adafruit Raspberry Pi Camera Board Case with 1/4" Tripod Mount [ADA3253]

Adafruit Raspberry Pi Camera Board Case with 1/4" Tripod Mount [ADA3253]

This is a basic, classic Adafruit Raspberry Pi Camera Board Enclosure  with a black base and a clear top. The case is as minimal as it gets, coming in just two pieces of polycarbonate that snap snugly together. This case will keep your Pi Camera safe and secure while also looking super sleek. Works with Pi Camera v1 and v2. The enclosure was designed by Mike Doell – just like our elegant, beautiful, and functional Pi Cases for Raspberry Pi Zero and Model B. Made of ultra-durable, super-glossy polycarbonate, it is both good looking and tough enough to toss into your pocket, bookbag, or toolbox. It has an easy-to-access slim opening for your camera cable to extend out from the camera module. The camera board sits nicely in the base, latching to the four little pegs, and the lid fits snugly on top. There's also a tiny hole in the lid so not to distort the capturing of images.On the sides there are two slots so you can strap the camera to something, use zip-ties, tape, velcro straps, whatever!On the back is a 1/4" tripod mount nut, so you can attach it to anything with a standard tripod screw. Note that to keep the enclosure compact we used a slim nut - so attach the case carefully and make sure not to push the tripod screw through the camera! Just turn it until you fe...

  • Brand: Adafruit
  • ASIN: B0713RMJGX
  • UPC: 604776613275

SNES Case for Raspberry Pi with high performance aluminium heatsink by Kintaro. Compatible with the Raspberry Pi 3, 2 and B+

SNES Case for Raspberry Pi with high performance aluminium heatsink by Kintaro. Compatible with the Raspberry Pi 3, 2 and B+

Treat your Raspberry Pi on a case that fits the retro occasion Every hero needs an awesome outfit and your Raspberry Pi is no exception. The Super Kuma case is here to make sure your Pi is dressed for the cause on it's journey back in time. On top of a retro look design to make your Pi travel in style and anti-slip pads to stop your case from swerving, the Super Kuma includes a custom high performance heatsink that keeps your Pi cool under any circumstances. No longer do you have to worry about your Raspberry Pi overheating! For the tinkerers Looking to tinker around with your new time machine to give it your own touch? Great! Here's a small list of ideas that you may find interesting Adding an LED light Adding a cooling fan for an even cooler Pi Adding working buttons for that sweet on/off slide Click "Add to Cart" now and take your Super Kuma on a trip down memory lane. Safe Travels!

  • Brand: Kintaro
  • ASIN: B0767HHJY1

Building block compatible SmartiPi Raspberry Pi B+,2, and 3 w/ camera case and GoPro compatible mount – Gray

Building block compatible SmartiPi Raspberry Pi B+,2, and 3 w/ camera case and GoPro compatible mount – Gray

The SmartiPi is a very versatile Raspberry Pi 2 or 3 case with building block and GoPro mount compatibility. Mount the case with any GoPro mount and snap on the included SmartiPi camera case to the top. Included is one GoPro compatible tripod mount. The building block compatible removable top plate is available in 3 different colors. When removed it allows you to see the Pi in the case. You can build off the plates to create vents or just use your imagination. The bottom of the case is not building block compatible but will stack. There are three holes in the case that align with 75mm vesa mount holes, so you can bolt it to the back of a monitor. We offer three different SmartiPi kit options in our store. The SmartiPi works the Raspberry Pi B+,2, and 3. Disclaimer:

  • Brand: Smarticase
  • ASIN: B00UDP0A6Q
  • UPC: 630125952887

RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio with 2x Telescopic Antennas

RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio with 2x Telescopic Antennas

Quickstart Guide: rtl-sdr.com/QSG V3 Features Guide: rtl-sdr.com/V3 Antenna Guide: rtl-sdr.com/DIPOLE This is an RTL-SDR software defined radio receiver with RTL2832U ADC chip, R820T2 tuner, 1PPM TCXO, SMA F connector and aluminium case with passive cooling. Tunes from 500 kHz to 1.8 GHz with up to 3.2 MHz (2.4 MHz stable) of instantaneous bandwidth. (HF works in direct sampling mode). Perfect for use as a computer based radio scanner with free software like SDR#, HDSDR, SDR-Radio, GQRX or SDR Touch on Android. Works on Windows, MacOS, Linux, Android and single board computers like the Raspberry Pi. Great for many applications including general radio scanning, air traffic control, public safety, ADS-B aircraft radar, marine AIS, ACARS, trunked radio, P25/MotoTRBO digital voice, POCSAG, weather balloons, APRS, NOAA APT/Meteor M2 weather satellites, radio astronomy, DAB, or as a low cost panadapter with a standard ham radio. As of Sept 28 now comes with a dipole antenna kit which is perfect for beginners. The short antennas are great for ADS-B, and the longer antennas work well at lower frequencies. When used in a v-dipole configuration the antenna works well for 137 MHz weather satellites and the ISS. Use in a vertical configuration for terrestrial signals. The two mounts a...

  • Brand: RTL-SDR Blog
  • ASIN: B011HVUEME
  • UPC: 642419993834

Camera for Raspberry Pi 2 and Pi 3, Professional Mini Video Raspberry Pi Camera Lenses Webcam - 5MP, 1080p

Camera for Raspberry Pi 2 and Pi 3, Professional Mini Video Raspberry Pi Camera Lenses Webcam - 5MP, 1080p

The Camera Module for Raspberry Pi is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. The board itself is tiny. It weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. It connects to Raspberry Pi by way of a short ribbon cable. The camera is connected to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi. The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video. The camera is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system. Spec: - CMOS size: 1/4 inch - Diagonal: 72 degrees - Sensor best pixel: 1080p - Maximum Photo Resolution: 2592 × 1944 pixel - Supported...

  • Color: Green
  • Brand: CHPOWER
  • ASIN: B0795KF1D1

Ultra Compact Camera Case for Canon Powershot ELPH 360 with storage

Ultra Compact Camera Case for Canon Powershot ELPH 360 with storage

✔ The Ultra Compact Camera Case with Storage is a small, padded case for your point/shoot camera. ✔ The rich Dobby (woven) nylon exterior and thickly padded interior protect your camera from bumps, abrasions and the wear and tear normally associated with everyday use. ✔ The case has a zippered exterior pocket to hold an additional memory card.

  • Brand: Number 1 In Service
  • ASIN: B01AWYQ4SA
  • UPC: 640947990271

Building block compatible SmartiPi Raspberry Pi B+,2, and 3 w/ camera case – Blue

Building block compatible SmartiPi Raspberry Pi B+,2, and 3 w/ camera case – Blue

The SmartiPi is a Kickstarter funded project! Search for it on Kickstarter.The SmartiPi is a very versatile Raspberry Pi B+ or Pi 2 model B case with building block and GoPro mount compatibility. Mount the case with any GoPro mount and snap on the included SmartiPi camera case to the top. The possibilities are endless. The building block compatible removable top plate is available in 3 different colors. When removed it allows you to see the Pi in the case. You can build off the plates to create vents or just use your imagination. There are three holes in the case that align with 75mm vesa mount holes, so you can bolt it to the back of a monitor. We offer three different SmartiPi kit options in our store. The SmartiPi works the Raspberry Pi B+,2 and 3. GoPro compatible tripod mount not included. D GoPro is a registered trademarks of GoPro, Inc. This product is not endorsed or licensed from GoPro. Raspberry Pi is a trademark of the Raspberry Pi Foundation. All trademarked items are the property of their respective owners and licensees.

  • Brand: Smarticase
  • ASIN: B00UDP08IG
  • UPC: 630125952856

Building block compatible SmartiPi Raspberry Pi B+,2, and 3 w/ camera case – Red

Building block compatible SmartiPi Raspberry Pi B+,2, and 3 w/ camera case – Red

The SmartiPi is a Kickstarter funded project! Search for it on Kickstarter.The SmartiPi is a very versatile Raspberry Pi 2 or 3 case with building block and GoPro mount compatibility. Mount the case with any GoPro mount and snap on the included SmartiPi camera case to the top. The possibilities are endless. The building block compatible removable top plate is available in 3 different colors. When removed it allows you to see the Pi in the case. You can build off the plates to create vents or just use your imagination. The bottom of the case is not building block compatible but will stack. There are three holes in the case that align with 75mm vesa mount holes, so you can bolt it to the back of a monitor. We offer three different SmartiPi kit options in our store. The SmartiPi works the Raspberry Pi B+,2, and 3. GoPro compatible tripod mount not included. Disclaimer: GoPro is a registered trademarks of GoPro, Inc. This product is not endorsed or licensed from GoPro. Raspberry Pi is a trademark of the Raspberry Pi Foundation. All trademarked items are the property of their respective owners and licensees.

  • Brand: Smarticase
  • ASIN: B00UDP0052
  • UPC: 630125952832

Building block compatible SmartiPi Raspberry Pi B+,2, and 3 case – Blue

Building block compatible SmartiPi Raspberry Pi B+,2, and 3 case – Blue

The SmartiPi is a very versatile Raspberry Pi 2 or 3 case with building block and GoPro mount compatibility. Mount the case with any GoPro mount and snap on the optional SmartiPi camera case to the top (not included). The possibilities are endless. The building block compatible removable top plate is available in 3 different colors. When removed it allows you to see the Pi in the case. You can build off the plates to create vents or just use your imagination. There are three holes in the case that align with 75mm vesa mount holes, so you can bolt it to the back of a monitor. We offer three different SmartiPi kit options in our store. The SmartiPi works the Raspberry Pi B+,2, and 3. Raspberry Pi camera case and GoPro compatible tripod mount not included. Disclaimer: GoPro is a registered trademarks of GoPro, Inc. This product is not endorsed or licensed from GoPro. Raspberry Pi is a trademark of the Raspberry Pi Foundation. All trademarked items are the property of their respective owners and licensees.

  • Brand: Smarticase
  • ASIN: B00UDOZZKI
  • UPC: 630125952818

Case Logic Ultra Compact Camera Case for Nikon COOLPIX S7000 with Storage

Case Logic Ultra Compact Camera Case for Nikon COOLPIX S7000 with Storage

✔ The Ultra Compact Camera Case with Storage is a small, padded case for your point/shoot camera. ✔ The rich Dobby (woven) nylon exterior and thickly padded interior protect your camera from bumps, abrasions and the wear and tear normally associated with everyday use. ✔ The case has a zippered exterior pocket to hold an additional memory card.

  • Brand: Case Logic
  • ASIN: B019EG0RWQ
  • UPC: 640947987370
Similar Raspberry Pi Tripod Results
Raspberry Pi Tripod Video Results

Raspberry Pi Camera 3D Printed Tripod and Case

Raspberry Pi Tripod

This is a simple project for making an 3D printed case and tripod for the Raspberry Pi camera board. It's great for photographpy and monitoring projects that need a basic stand. For example, you could use this to make a monitoring setup for an OctoPrint connected 3D printer. You’ll need a few ma...

  • Likes: 66
  • View count: 7527
  • Dislikes: 3
  • Comments: 3
Tags: adafruit,electronics,diy,arduino,hardware,opensource,projects,raspberry,computer,raspberrypi,micr...

3D Hangouts - Raspberry Pi Cam Tripod

Raspberry Pi Tripod

Hang out with Noe & Pedro Ruiz and discover 3D printing! Get your 3D news, projects, design tutorials and more each week on Google+ Hangouts On Air. Subscribe to the Adafruit and follow us on Google+ to catch future broadcasts. We’re warming up our printers, come hang out with us this Thursday! ...

  • Likes: 33
  • View count: 3468
  • Dislikes: 1
  • Comments: 8
Tags: adafruit,electronics,diy,arduino,hardware,opensource,projects,raspberry,computer,raspberrypi,micr...

raspberry pi controls a motorised wifi yagi antenna tripod

Raspberry Pi Tripod

raspberry pi controls a motorised wifi yagi antenna tripod

  • Likes: 13
  • View count: 2294
  • Dislikes: 0
  • Comments: 2
Tags: Raspberry Pi (Computer),Wi-Fi (Brand),yagi,antenna,wifi antenna,antenne,pwnpi

Raspberry Pi automated tripod head with Stepper Motor 28BJY-48

Raspberry Pi Tripod

Raspberry Pi with Stepper Motor 28BJY-48 for gigapixel photography. Based on http://gigapi.blogspot.co.uk/ Moving to 90,-90,-180 and then to 0 degree. Code:http://pastebin.com/7ibfDiZx

  • Likes: 2
  • View count: 2946
  • Dislikes: 0
  • Comments: 3
Tags: Raspberry Pi (Computer),Gigapixel Image,Stepper Motor (Invention),Photography (Invention)