MYSWEETY TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Hybrid Stepper Motor For CNC

MYSWEETY TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Hybrid Stepper Motor For CNC

Feature: PWM chopper type bipolar stepper motor driver IC 1. 9V-42V DC power supply 2. H bridge bipolar constant phase flow drive 3. the maximum 4.0A of the eight kinds of output current 4. the largest 32 subdivision of the 6 models are optional 5. input signal high speed photoelectric isolation 6. common-anodestandard single pulse interface 7. offline to maintain the function 8. semi closed enclosure can be adapted to a more stringent environment 9. to provide energy-saving semi-automatic current lock function 10. built-in temperature protection and over current protection. Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode. Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work. IC parameter: single chip bipolar sine microstep stepper motor driver the new BiCD 0.13 nm process up to 42V resistance (a +) = 0.4 ?the forward and reverse rotation control 5 subdivision mode options (1/1, 1/2, 1/4, 1/8, 1/16,1/32) output current: IOUT = 4.0A (peak, in 100ms) rated output: IOUT = 3.5 A package: HZIP25 - 1.00F input port internal pull-down resistor: 100 K alarm output pin current:Ialert = 1mA monitoring output pin (MO): Imo= 1mA with reset and enable pin ...

  • Brand: MYSWEETY
  • ASIN: B01MYMK1G9
  • UPC: 713839367052

Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

Specification: Chip: L298N Logic voltage: 5V Logic current 0mA-36mA Storage Temperature: -20 ℃ to ℃ to +135 Operating mode: H-bridge driver (dual) Drive voltage: 5V-35V Drive current: 2A (MAX single bridge) Maximum power: 25W Dimensions: 43x43x27mm Package include: 1x L298N Module Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN4 control OUT3 OUT4

  • Brand: Qunqi
  • ASIN: B014KMHSW6

L298N Dual H Bridge Stepper Motor Driver Controller Board Module for Arduino UNO MEGA R3 Mega2560 Duemilanove Nano Robot(Pack of 2) by IFANCY-TECH

L298N Dual H Bridge Stepper Motor Driver Controller Board Module for Arduino UNO MEGA R3 Mega2560 Duemilanove Nano Robot(Pack of 2) by IFANCY-TECH

Specification: Chip: L298N Logic voltage: 5V Logic current: 0mA-36mA Storage Temperature: -20 ℃ to ℃ to +135 Operating mode: H-bridge driver (dual) Drive voltage: 5V-35V Drive current: 2A (MAX single bridge) Maximum power: 25W Dimensions: 43x43x27mm

  • Brand: IFANCY-TECH®
  • ASIN: B01GZ1QUHO
  • UPC: 717630142702

BIQU A4988 Compatible Stepper StepStick Motor Diver Module with Heat Sink for 3D Printer Controller Ramps 1.4(Pack of 5pcs)

BIQU A4988 Compatible Stepper StepStick Motor Diver Module with Heat Sink for 3D Printer Controller Ramps 1.4(Pack of 5pcs)

Specifications: Size: A4988:20*15*11mm(LWH) Heat Sink: 9*9*5mm(LWH) Weight: 0.8ounces Color: Red Features: -Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) -Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection -Automatic current decay mode detection / selection -Internal UVLO -Mixed with slow current decay modes -Synchronous rectification for low power dissipation -Crossover-current protection -Thermal shutdown circuitry -3.3 and 5 V compatible logic supply -Thermal shutdown circuitry -Ground Fault Circuit -Load short-circuit protection -Of five optional step mode: full, 1/2, 1/4, 1/8 and 1/16 Package Included: 5*A4988 StepStick Stepper Motor Diver Module 5*Heat Sink

  • Brand: BIQU
  • ASIN: B01FFGAKK8
  • UPC: 608408772606

SMAKN® TB6600 Upgraded Version 32 Segments 4A 40V 57/86 Stepper Motor Driver

SMAKN® TB6600 Upgraded Version 32 Segments 4A 40V 57/86 Stepper Motor Driver

*9V-40V DC power supply. *H-bridge bipolar constant phase flow driver. *The maximum output current is 4.0A (eight optional). *Up to 32 segments of six kinds of sub-modes available. *The input signal high-speed photoelectric isolatio. *Standard common anode single pulse interface. *Offline keep function. *Semi-enclosed chassis can adapt to a more demanding environment. *Provide energy saving semiautomatic current lock function. *Built-in thermal protection and over-current protection. Note: *This driver is the upgraded version TB6600, heightening segment to 32 subdivision, suitable for high segmentation applications. *For step motor: 42, 57, 86 type 2 phase 4 phase (4 / 6 / 8 line). Package included: *1 x TB6600 Stepper Motor Driver Controller. Feedback: We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.Thank you very much!

  • Brand: SMAKN
  • ASIN: B016ZJS1FA
  • UPC: 710185279213

Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

Specification: Chip: L298N Logic voltage: 5V Logic current 0mA-36mA Storage Temperature: -20 ℃ to ℃ to +135 Operating mode: H-bridge driver (dual) Drive voltage: 5V-35V Drive current: 2A (MAX single bridge) Maximum power: 25W Dimensions: 43x43x27mm Package include: 2x L298N Module Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN4 control OUT3 OUT4

  • Brand: Qunqi
  • ASIN: B01M29YK5U

DROK L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 Duemilanove

DROK L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 Duemilanove

Parameter: Chip: L298N Logic voltage: 5V Logic current 0mA-36mA Storage Temperature: -20 ℃ to ℃ to +135 Operating mode: H-bridge driver (dual) Drive voltage: 5V-35V Drive current: 2A (MAX single bridge) Maximum power: 25W Dimensions: 43x43x27mm Product features: 1.L298N as main driver chip makes strong driving ability/small heating/strong anti-interference 2.Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability 3.This moduel integrated with one internal 5V power supply, meaning when your driving voltage is 7V-35V,it makes 5V of energy board power supply logically; when 5V of energy board power on, please not input voltage to +5V power supply in interface but you can lead 5V voltage for external usage Eg: ENA enable IN1 IN2 to control OUT1 OUT2 ENB enable IN3 IN4 to control OUT3 OUT4 Package includes: 1x L298N Module

  • Brand: DROK
  • ASIN: B00CAG6GX2
  • UPC: 619397029299

Stepper Motor Controller PWM Pulse Signal Generator Speed Regulator Board,DC 15-160V/ 5-12V

Stepper Motor Controller PWM Pulse Signal Generator Speed Regulator Board,DC 15-160V/ 5-12V

Specification: Power supply voltage: 15-160V / 5-12V Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ Size: Approx. 73 x 51 x 37mm / 2.87 x 2 x 1.45inch Weight: 50g Quantity: 1pc Package List: 1 x PWM Generator Note: If you use to start or stop the function, ENA controller enable terminal must be connected to common cathode or common anode drive.

  • Brand: Walfront
  • ASIN: B077SFDMFJ
  • UPC: 663862459562

BIQU A4988 Compatible StepStick Stepper Motor Diver Module with Heat Sink for 3D Printer Controller Ramps 1.4(Pack of 5pcs)

BIQU A4988 Compatible StepStick Stepper Motor Diver Module with Heat Sink for 3D Printer Controller Ramps 1.4(Pack of 5pcs)

Specifications: Size: A4988:20*15*11mm(LWH) Heat Sink: 9*9*5mm(LWH) Weight: 0.8ounces Color: Green Features: -Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) -Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection -Automatic current decay mode detection / selection -Internal UVLO -Mixed with slow current decay modes -Synchronous rectification for low power dissipation -Crossover-current protection -Thermal shutdown circuitry -3.3 and 5 V compatible logic supply -Thermal shutdown circuitry -Ground Fault Circuit -Load short-circuit protection -Of five optional step mode: full, 1/2, 1/4, 1/8 and 1/16 Package Included: 5*A4988 StepStick Stepper Motor Diver Module 5*Heat Sink

  • Brand: BIQU
  • ASIN: B01FFFYVV8
  • UPC: 608408772583

4 Axis TB6560 Nema23 Stepper Motor Driver Board CNC Controller Breakout Board 4V Type For CNC Router Milling Engraving Machine

4 Axis TB6560 Nema23 Stepper Motor Driver Board CNC Controller Breakout Board 4V Type For CNC Router Milling Engraving Machine

Package include: 1 x 4 Axis TB6560 Stepper Motor Driver board High speed Optocoupler !!! 1 x DB25 parallel cable 1 x Fan 4 x M4 screw English user manual will send by email 4 Axis CNC Controller TB6560 Stepper Motor Driver Board Products Features: The advantages of the TB6560AHQ chip The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed. Flush type low heat The area of the chip can support itself to cool when the current is low Supports a lot of stepper motors The advantages in the high-speed running conditionFeatures: 1. 4-wire 0-3.5A normally 3A , the 3.5A is the peak currentcan be regulated rate current output, bipolar stepper motor driver. 2. Standard parallel port , supports Mach2/3,EMC2, KCAM 4 etc. 3. Optical isolated (IO) and DCDC power isolated to protect the PC parallel port and other equipments. 4. Limit and emergency stop port ( standard DB9 port) 5. 4 working modes: mixed mode , fast mode, slow mode, standard mode 4-microstep: 1 1/2 1/4 1/16 . 6. 12-36V single power input uses the switch power chip as the 5V power supply, stable and low heat. 7. Adopts RC + 7414 auto semi-flow . 8. The relay output can control the main axis . 9. 5th axis extension control port ..

  • Color: Red
  • Brand: RATTM Motor
  • ASIN: B07235MS82
  • UPC: 785004502070
Similar Stepper Motor Driver Controller Results
Stepper Motor Driver Controller Video Results

Stepper Motor Driver & Remote Control

Stepper Motor Driver Controller

I have quite a few stepper motors laying around waiting for me to make a suitable controller to drive them but I don't seem to get around to it, so when I spotted this little circuit board on eBay it caught my eye, especially as it has an infrared remote control included. This was the eBay link ...

  • Likes: 276
  • View count: 100038
  • Dislikes: 27
  • Comments: 66
Tags: grandad,fun,electric,power,motor,engine,Serif,MoviePlus,Camera,FujiFilm,FinePix,S4800,Stepper Mot...

simple stepper motor control

Stepper Motor Driver Controller

(See also part II on this topic at https://youtu.be/XrizHAodv_k ) I needed a unidirectional electric motor that would work with a variable range at low rpm, but also go a lot faster when needed. A friend recommended a stepper motor and driver unit. It took me a while to work out how to connect it...

  • Likes: 149
  • View count: 12163
  • Dislikes: 4
  • Comments: 26
Tags: Stepper motor,Microstep driver,M335,Driver M335,simple stepper motor control

Arduino using a A4988 board to control a stepper motor

Stepper Motor Driver Controller

Quick video on how to test a Reprap controller board and stepper motor Link to the Code https://github.com/TasmanianDevilYouTube/Arduino/tree/master/RepRap_a4988_controller_with_stepper_motor

  • Likes: 492
  • View count: 128397
  • Dislikes: 20
  • Comments: 53
Tags: Arduino,Reprap test,A4988,stepper motor

Stepper Motor Driver Controller 2M542 4.2A

Stepper Motor Driver Controller

Valdiklid / Stepper Motor Driver Controller 2M542 4.2A

  • Likes: 2
  • View count: 11748
  • Dislikes: 53
  • Comments: 4
Tags: Valdiklid,Stepper,Motor,Driver,Controller,2M542,4.2A